B25CF710.BSS is the correct File for the BIOS update. I updated mine from USB stick. make sure and use the USB2.0 ports for this and not the USB3.0 ports
Test all your risers using the PCIe 16x slot one by one. Bad risers with bad soldering spots or slightly burnt can cause major problems.
You can try one card in the PCI16x slot and one in the PCI4x slot directly into the motherboard too without risers.
Get the BIOS updated though, select Mining mode and set PCI Gen2.0
Try to disable any unecessary Com ports/Audio etc in BIOS.
Make sure your WIndows 10 is Ver 1704. Use Windows 10 update assistant if it is not. Type winver in start menu to see your Build version.
But basically process of elimination......
thanks. i spent the entire day troubleshooting and it turns out 1 slot is faulty. after getting that problem fixed, I have a new problem: green screen of death. |
|
|
|
Well, there can be a lot of problems - not functional USB risers, BIOS Settings, driver malfunction, or maybe motherboard is defective. Try to check for problems one by one and strike them down until you find the core issue.
there should be no issue with using the hdmi port on 1 of the graphics card right? |
|
|
|
|
It seems my biostar tb250 btc pro cannot detect 2 or more graphics cards no matter which pcie slot I use. I've tried using just 2 or 3 graphcs card, the rest of the cards are completely disconnected.
graphics card: gigabyte aorus rx580 8gb
psu: seasonic x1250 gold.
Currently i have 3 graphics card installed and bios pcie lanes info says there are only 2 cards are present (_1 and _2) but windows and gpuz does not detect the 2nd card
I am using a fresh installation of windows 10 pro. I've also tried flashing the bios but the file type i got from the website ends with .bss but the bios screen tells me there is no bios file found in the thumbdrive.
|
|
|
|
|
so which version are we getting for the vega 64 air cooled? the ones with black plastic shroud or the brushed metal limited edition ones?
|
|
|
|
|
I've never done eth mining before so please help me out?
config txt
-epool asia1.ethermine.org:14444
-ewal 0xd25ea15013157294609c8bcc8d33ca0d683bcd21
#-epsw x
#-dpool stratum+tcp://yiimp.ccminer.org:4252
#-dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4
#-dpsw x
#-esm 1
#-mode 1
#-tt 70
#-asm 0
#-allpools 1
epools.txt
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# POOL: asia1.ethermine.org:14444, WALLET:oxd25ea15013157294609c8bcc8d33ca0d683bcd21/start1, PSW: x, ESM: 0, ALLPOOLS: 1
Previously I was using the start.bat
and this is the settings I used
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:14444 -ewal 0xd25ea15013157294609c8bcc8d33ca0d683bcd21.start1 -epsw x
|
|
|
|
Its extruded aluminum. Comes in various forms . . . 8020.net or Makerbeam is available on Amazon. You can also get fully made cases for Spotswood. http://spotswoodcomputercases.com/wp/
anyone knows what is that metal bar that is used to mount the gpus?
am I right to say the gpus are "clamped" on to that extruded aluminum? |
|
|
|
Here's my build:  anyone knows what is that metal bar that is used to mount the gpus? |
|
|
|
|
right now the status is "waiting to be processed" for more than a day
|
|
|
|
|
anyone can supply me with a picture of the controller board with cables properly plugged in?
I reassembled the avalon after a thorough cleaning and i forgot which port is meant for the temperature sensor.
now it;s making the fans run excessively fast even though I set the temperature cutoff at 52C (it's running at 49C) and 40-100 percent fan speed, it's running at 60% fan speed
|
|
|
|
|
What's the design on the other side?
What's the price for bulk orders? Say 100-200?
|
|
|
|
|
now bitstamp is not showing the prices properly....
|
|
|
|
|
starting to have problems then intermittent connections as well.
wtf bitstamp.
|
|
|
|
i am one of those idiots that bought at 530-540 when it crashed to 378 on bitstamp. just bloody gave up looking at it then saw it climb back up tp 550 and now 600+ Spent all my cash in bitstamp buying at 530-540 thinking it was just a mild correction as before. so when it was at 378-400+ i had zero cash to buy in. FML  |
|
|
|
|
not sure what to call it
algo trades, or algo strikes
its where the prices rapidly crash/spike a few dollars and from the main page, a quick succession of trades, usually below 0.10btc, gets filled.
prices then recover back before it happens again.
it is not due to 1 guy selling a large order and bitstamp fills it at any price it can right?
|
|
|
|
is it possible for the window to show just the candle sticks and information like buy/sell volume are at the bottom with options to add MAs, trend lines, etc like https://www.tradingview.com/v/GTbFdsiS/ |
|
|
|
|
how much for shipping to singapore/
|
|
|
|
|
Having problems again? ??
|
|
|
|
|
i'll take 2. batch 1 or 2-3 doesn't matter.
|
|
|
|
|
ok i want a set.
what details do you need me to send you (via pm)?
|
|
|
|
|
Show Posts
