Latest posts of: Snu2620

Show Posts
Pages: « 1 [2]

on: December 08, 2017, 09:26:10 PM

Quote from: erospatos on December 07, 2017, 07:55:08 PM Quote from: Snu2620 on December 03, 2017, 10:58:48 PM I am facing the same issue. My D3 antminer is missing one chain. Its not showing up Please let me know if some one has solution My miner status saying ~18000 Mh/s still and sometimes it reaches to over 19000 mh/s. How it could be possible if one chain is missing. Either its working but now showing up on miner status. Same problem. I cant see chain no 3, working 19,5GH/s, its interesting. ( I think its nicehash hack effect ) Chain# ASIC# Frequency GH/S(RT) HW Temp(PCB) Temp(Chip) ASIC status 1 60 537 6409.59 2 54 76 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo 2 60 537 6455.22 0 52 74 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo My D3 Miner Status was like yours and after 10 hrs of working it is not working anymore no Hash rate at all not even one chain showing up. I am in the process of figuring out which hash board has problem and going to send to Bitmain. Let me if something work out for u Thanks

on: December 07, 2017, 09:44:08 PM

Quote from: Green Samurai on December 07, 2017, 07:30:28 PM Greating all, It would be great time for DEM in the next Year. You will see what will happend Just give me some time to buy 1 000 000 coins more! Came little late but got little share. Got strategy for million tough this coin will be huge soon.

on: December 07, 2017, 08:55:08 PM

I am new to mining Just ordered my 3 S9's for new batch: Well I have Electric dryer outlet ( 220~240 volt / 30 amp breaker - 4 prong Socket ) I want to run at least 2 S9's on it Should I order this https://www.amazon.com/dp/B00SOYBRCE/ref=asc_df_B00SOYBRCE5293254/?tag=hyprod-20&creative=394997&creativeASIN=B00SOYBRCE&linkCode=df0&hvadid=167125192708&hvpos=1o2&hvnetw=g&hvrand=16491355410385272625&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9026847&hvtargid=pla-340511534324 and connect my PSU' to it ? Or I need step down transformer which is around 5000 watt to 110v output https://www.amazon.com/dp/B007YK55OA/ref=asc_df_B007YK55OA5293256/?tag=hyprod-20&creative=395009&creativeASIN=B007YK55OA&linkCode=df0&hvadid=167141218295&hvpos=1o18&hvnetw=g&hvrand=7914984236546052618&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9026847&hvtargid=pla-305850161251 and connect my PSU's to output socket ? Which one is the better option ? If some one has better idea Please suggest me. ***Yes I have very little knowledge of electrical wiring and I cant mess up with it I live in a apartment Need 24/7 operation without worrying

on: December 07, 2017, 12:16:51 AM

Quote from: Peke on December 06, 2017, 04:43:47 PM Same here. Chain 3 is completely missing from miner status. After the restart all chains powered, hashrate summary shows around 19GH/s and that's the number showing in my mining pool also. So it seems like chain 3 is working, atleast partially. However chain 2 shows missing ASIC's and both chain 1 and 2 have lots of HW errors when chain 3 is powered. Chain 3 off both chains 1 and 2 are working just fine with only few HW errors. So it might be bad for healthy boards/main board to keep chain 3 connected. Reloading firmware back and forth helps nothing, so it's propably hardware issue. On the other hand, now when I think of it, board 3 disappeared right after changing pool to Nicehash couple days ago. So who knows.. Fk it. I'm not sending them a hashboard and spend another $100-150 for this non-profit piece of st. Atleast not yet when I have 2,5 months of warranty time left and naturally something else will break during that time. BTW, when did they change warranty time from 180 days to 90? For what I remember when ordering in early september, it was 180 days. Changing it post order is bullshit. I thought I am going to run on 2 chains but My D3 is not working anymore . Created a ticket on bitmain site, since then never heard from them. Thanks

on: December 06, 2017, 06:28:13 PM

I am new to mining Just ordered my 3 S9's for new batch: Well I have Electric dryer outlet ( 220~240 volt / 30 amp breaker - 4 prong Socket ) I want to run at least 2 S9's on it Should I order this https://www.amazon.com/dp/B00SOYBRCE/ref=asc_df_B00SOYBRCE5293254/?tag=hyprod-20&creative=394997&creativeASIN=B00SOYBRCE&linkCode=df0&hvadid=167125192708&hvpos=1o2&hvnetw=g&hvrand=16491355410385272625&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9026847&hvtargid=pla-340511534324 and connect my PSU' to it ? Or I need step down transformer which is around 5000 watt to 110v output https://www.amazon.com/dp/B007YK55OA/ref=asc_df_B007YK55OA5293256/?tag=hyprod-20&creative=395009&creativeASIN=B007YK55OA&linkCode=df0&hvadid=167141218295&hvpos=1o18&hvnetw=g&hvrand=7914984236546052618&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9026847&hvtargid=pla-305850161251 and connect my PSU's to output socket ? Which one is the better option ? If some one has better idea Please suggest me. ***Yes I have very little knowledge of electrical wiring and I cant mess up with it I live in a apartment 24/7 operation without worrying

on: December 03, 2017, 10:58:48 PM

I am facing the same issue. My D3 antminer is missing one chain. Its not showing up Please let me know if some one has solution My miner status saying ~18000 Mh/s still and sometimes it reaches to over 19000 mh/s. How it could be possible if one chain is missing. Either its working but now showing up on miner status.

on: November 28, 2017, 06:21:55 AM

Quote from: TRexMcStubyArms on November 28, 2017, 03:10:35 AM I just want to say I think it's awesome we have someone tied to the coin (Chekaz) here helping on the forum. I think that adds a lot credibility to the coin. Yes , Completely agree with you. I am with this project since It was started. And always see Dev( Chekaz ) here answering all questions and guiding all people. He answers almost everything asked about the project. It shows how serious and committed Chekaz and TZC project team are. I believe this project have so much potential and have great future. Wish you best of luck Thanks Chekaz and all TZC team.

on: November 28, 2017, 12:05:44 AM

Hello, I got first batch( Took around ~ 4 days ) of coins through wallet staking like around 6 days ago till then I am staking and never closed my wallet I was monitoring my network and block everything seems good to me But i never get any stake reward after my first batch.Should i need to change something or restart the wallet or just leave it like that ?? Thanks

Pages: « 1 [2]