Latest posts of: dadashali

Show Posts
Pages: « 1 [2]

on: December 16, 2017, 06:45:04 PM

Quote from: joeloosth on December 16, 2017, 01:07:34 PM Quote from: dadashali on December 16, 2017, 10:05:15 AM Quote from: dimafern on December 15, 2017, 10:58:11 PM Quote from: dadashali on December 15, 2017, 10:43:37 PM My GPU does not have any video output ports as they are mining version and I need to connect via onboard VGA. The matter is that when it'll show "Started hiveos" after that I'll only see a blink "_" and nothing more! what's wrong? There might be driver conflict to start graphics interface. During boot, you might see IP address, try to access it with SSH or VNC. I did unattached all my mining cards and only connected via onboard VGA and after this solution, i saw Hiveos console and it asked me for "RIG ID". Let me test your solution. I'll write my answer here. Thanks Once you see it ask for your rig id you just need to go online to hiveos.farm and signup, then create a rig and it'll give you an id number and password to enter on your rig. There is a video on that same website I see but the matter was about to use Hiveos on a Rig which has onboard vag and the mining VGA does not have video out put and on this way we should run it for first time with out any mining vga and after va full setup we can attach cards and use only via ssh or remote software because it'll not be able to show on a monitor while onboard vga and mining vga are active on a same Rig. It would be great if Hiveos developers can fix this matter.

on: December 16, 2017, 10:05:15 AM

Quote from: dimafern on December 15, 2017, 10:58:11 PM Quote from: dadashali on December 15, 2017, 10:43:37 PM My GPU does not have any video output ports as they are mining version and I need to connect via onboard VGA. The matter is that when it'll show "Started hiveos" after that I'll only see a blink "_" and nothing more! what's wrong? There might be driver conflict to start graphics interface. During boot, you might see IP address, try to access it with SSH or VNC. I did unattached all my mining cards and only connected via onboard VGA and after this solution, i saw Hiveos console and it asked me for "RIG ID". Let me test your solution. I'll write my answer here. Thanks

on: December 15, 2017, 10:43:37 PM

My GPU does not have any video output ports as they are mining version and I need to connect via onboard VGA. The matter is that when it'll show "Started Hive" after that I'll only see a blink "_" and nothing more! what's wrong?

on: December 12, 2017, 10:02:29 PM

How is it possible to find which card got stopped the mining Rig in the SMOS? While the rig will be stopped so there is no SSH access to it until reboot it and after that, there is no log (SMOS will clear any log after each reboot...!!)

on: December 12, 2017, 08:58:00 PM

Quote from: zot57 on December 12, 2017, 08:30:16 PM Quote from: dadashali on December 12, 2017, 08:19:30 PM EthOS support 16x at the moment so it's possible to make it on linux 16.04 based but i'll be glad if we have some news about 19 cards motherboards on lovely SMOS! Can I have Celeron 3930 and 4 Gb of ram with this board on SMOS? what setup you have? Sure why not?! That's good while you don't need great CPU for GPU mining! I've CPU G4400, 4GB DDR4 Ram, 12x Sapphire RX 470 Mining Edition 4GB, 2x PSU 1200W 80 Plus Platinum and at the end i've around 350 MH/s with Ethereum on Ethermine.org pool!

on: December 12, 2017, 08:19:30 PM

Quote from: cccomputing on December 12, 2017, 07:43:12 PM Quote from: zot57 on December 12, 2017, 07:22:27 PM Can you run 19 GPU's (ASUS B250 Mining Expert) with SMOS? Max 15, more than 13 can cause problems EthOS support 16x at the moment so it's possible to make it on linux 16.04 based but i'll be glad if we have some news about 19 cards motherboards on lovely SMOS!

on: December 12, 2017, 07:34:02 AM

Quote from: meominer on December 12, 2017, 04:21:25 AM I've got problem when changing miner and options at this time, so the rig cannot work. i found no idea about this maintenance except a "simple notification" lol here what i have done briging my rig back: 1. logging in my rig with putty via ssh, using root account 2. editing /home/miner/config.json (remember replacing "/" by "\/") 3. reboot the rig You are great!

on: December 12, 2017, 07:27:36 AM

Quote from: erwingalang on December 12, 2017, 07:14:01 AM Quote from: willi9974 on December 12, 2017, 07:09:59 AM What is the usename and password to log in via SSH? please try 'miner' for both username and password... While SMOS server is offline how is it possible to access it via via SSH?! Is there any way to access SMOS files on the USB to edit them directly? I can't open the part of USB that contained SMOS files on it ...

Pages: « 1 [2]