 Show Posts
|
|
Pages: « 1 [2] 3 »
|
|
Guys i installed BFGMiner and it doesnīt say nothing about timeouts and speed is 600Mh/s. But still i want solve that problem with CGMiner. So what binary i need?
|
|
|
|
Guys, the problem WAS. I didnīt rebooted my computer  After reboot BFGMiner start well with Block Erupter |
|
|
|
Again no effect  Whats wrong? I tried with just ./configure and with OpenCL disabled, with icarus enabled. No effect |
|
|
|
No effect All devices disabled, cannot mine!./bfgminer -o http://api.bitcoin.cz:8332 -u XXXXXX -p XXXXXX -S All --icarus-options 115200:1:1 --icarus-timing 3.0=100 --disable-gpu |
|
|
|
Didnīt worked for me I used -S allbut still this: All devices disabled, cannot mine! |
|
|
|
|
But why one Block Erupter works (connected DIRECTLY to computer-USB2.0) fine on 336MH/s and second, connected on powered HUB doesnīt work?
//btw my last message was:
not working for me it says:
-bash: ./cgminer: binary file cannot be executed
i replace old cgminer file
|
|
|
|
BFGminer for Debian from source: apt-get update && apt-get install make screen mc autoconf libtool libncurses-dev yasm curl libcurl4-openssl-dev libjansson-dev pkg-config libudev-dev uthash-dev libusb-dev htop php5 apache2
wget http://beehost.org/bfgminer-3.1.4.zip
unzip bfgminer-3.1.4.zip
mv bfgminer-3.1.4 bfgminer
cd bfgminer && ./configure
make
Cheers r50zyry5 Thank you very much, but it says failed to open OpenCL drivers. I need it to work with ONLY BlockErupters. How to compile it with ICARUS only? I donīt use GPU. Thanks ! |
|
|
|
not working for me it says: -bash: ./cgminer: binary file cannot be executedi replace old cgminer file ( |
|
|
|
|
Hello,
there isnīt version for Debian. How i can use BFGMiner on debian? add-apt-repository ppa:unit3/bfgminer donīt work
|
|
|
|
as i said, i donīt know how to compile it/use it ( I donīt know what i need to do with *.a file. Can you send me tutorial for it? |
|
|
|
500mA + 500mA = 1A. Not counting the hub's overhead, so your hub's PSU is underpowered.
//definetely not. Now i tried with one Block Erupter connected to HUB and one connected directly to computer, and effect was same, so i am sure there isnīt problem with power Sry i am little noob at linux. There isnīt download for Debian. And i donīt know what to do with *.a file |
|
|
|
Make sure there isn't another libusb-1.0.dll somewhere on your system?
Aah maybe this was problem. I will check it P.S. i installed CGMiner with this tutorial: http://blog.phrog.org/2013/07/06/simple-debian-cgminer-asicminer-block-erupter-usb-setup///I uninstalled all packages via apt-get remove (including libusb.dll 1.00) but effect was same (i rebooted too) Output was same, but here is output with hotplug: cgminer version 3.4.0 - Started: [2013-08-27 09:42:24]
--------------------------------------------------------------------------------
(5s):61.40M (avg):61.54Mh/s | A:1 R:0 HW:0 WU:1.4/m
ST: 2 SS: 0 NB: 1 LW: 6 GF: 0 RF: 0
Connected to stratum.bitcoin.cz diff 1 with stratum as user taxik.worker1
Block: 003b83e55adaf99b... Diff:65.8M Started: [09:42:24] Best share: 1
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
AMU 0: | 64.99M/121.5Mh/s | A:1 R:0 HW:0 WU:2.8/m
AMU 1: | 0.000/ 0.000h/s | A:0 R:0 HW:0 WU:0.0/m
--------------------------------------------------------------------------------
[2013-08-27 09:42:22] Started cgminer 3.4.0
[2013-08-27 09:42:22] No devices detected!
[2013-08-27 09:42:22] Waiting for USB hotplug devices or press q to quit
[2013-08-27 09:42:22] Probing for an alive pool
[2013-08-27 09:42:23] Switching pool 0 http://api.bitcoin.cz:8332 to stratum+tc
p://stratum.bitcoin.cz:3333
[2013-08-27 09:42:24] Network diff set to 65.8M
[2013-08-27 09:42:45] Hotplug: Icarus added AMU 0
[2013-08-27 09:42:50] Hotplug: Icarus added AMU 1
[2013-08-27 09:42:53] AMU0: TIMEOUT GetResults took 2479ms but was 100ms
[2013-08-27 09:42:53] Accepted cfbbb3b6 Diff 1/1 AMU 0
[2013-08-27 09:42:53] Stratum from pool 0 requested work restart
Pls guys help me, everyday i am loosing profit from second Block Erupter (( |
|
|
|
maybe its a bit underpowered? I had a similar problem when I connected two Block Erupters to a 5-port USB hub with cardreader that only has a 1000mA PSU.
I think not, because Windows computer works fine with BitMinter client and powered hub, but here are specifiations of my hub: Power supply 5 W Input voltage 100 - 240 V Output voltage 5 V Input frequency 50 / 60 Hz Output current 1 A //definetely not. Now i tried with one Block Erupter connected to HUB and one connected directly to computer, and effect was same, so i am sure there isnīt problem with power |
|
|
|
I upgraded to latest version. But nothing changed Here output: cgminer version 3.4.0 - Started: [2013-08-26 18:40:26]
--------------------------------------------------------------------------------
(5s):169.0M (avg):160.9Mh/s | A:7 R:0 HW:0 WU:5.5/m
ST: 2 SS: 0 NB: 1 LW: 20 GF: 0 RF: 0
Connected to stratum.bitcoin.cz diff 1 with stratum as user taxik.worker1
Block: 000171c1103307a5... Diff:65.8M Started: [18:40:26] Best share: 20
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
AMU 2: | 228.8M/241.7Mh/s | A:4 R:0 HW:0 WU: 6.9/m
AMU 3: | 46.28M/43.38Mh/s | A:1 R:0 HW:0 WU: 1.7/m
--------------------------------------------------------------------------------
[2013-08-26 18:41:08] Hotplug: Icarus added AMU 3
[2013-08-26 18:41:12] AMU3: TIMEOUT GetResults took 4363ms but was 100ms
[2013-08-26 18:41:12] Accepted eb127853 Diff 1/1 AMU 3
[2013-08-26 18:41:14] AMU2: TIMEOUT GetResults took 5825ms but was 100ms
[2013-08-26 18:41:14] Accepted d71b7535 Diff 1/1 AMU 2
[2013-08-26 18:41:19] AMU2: TIMEOUT GetResults took 5716ms but was 100ms
[2013-08-26 18:41:19] Accepted 6ea984cc Diff 2/1 AMU 2
[2013-08-26 18:41:28] AMU2: TIMEOUT GetResults took 8750ms but was 100ms
[2013-08-26 18:41:28] Accepted 4af2b887 Diff 3/1 AMU 2
[2013-08-26 18:41:33] AMU2: TIMEOUT GetResults took 4578ms but was 100ms
[2013-08-26 18:41:33] Accepted 0c3cdd45 Diff 20/1 AMU 2
|
|
|
|
ah i think i know where is problem. The username must be in the form "myname_mymachine", where "myname" is your user name and "mymachine" is the name of one of your registered machines/workers.but i need solve this ( : https://bitcointalk.org/index.php?topic=281568.new#new |
|
|
|
Hello, today arrived second USB Block Erupter, so i connected it to my Debian linux server. But its slower than mining with only one ! Here is output: cgminer version 3.3.4 - Started: [2013-08-26 14:22:38]
--------------------------------------------------------------------------------
(5s):182.8M (avg):204.0Mh/s | A:38 R:0 HW:0 WU:2.8/m
ST: 1 SS: 0 NB: 4 LW: 89 GF: 0 RF: 0
Connected to stratum.bitcoin.cz diff 1 with stratum as user XXXXXXX
Block: 0028d887a81b58f1... Diff:65.8M Started: [14:34:42] Best share: 30
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
AMU 0: | 250.7M/122.6Mh/s | A:24 R:0 HW:0 WU:1.8/m
AMU 1: | 198.2M/81.40Mh/s | A:14 R:0 HW:0 WU:1.0/m
--------------------------------------------------------------------------------
[2013-08-26 14:34:34] Accepted 5c5f7265 Diff 2/1 AMU 1
[2013-08-26 14:34:42] Network diff set to 65.8M
[2013-08-26 14:34:42] Stratum from pool 0 detected new block
[2013-08-26 14:35:34] AMU0: TIMEOUT GetResults took 63648ms but was 100ms
[2013-08-26 14:35:34] AMU1: TIMEOUT GetResults took 60000ms but was 100ms
[2013-08-26 14:35:36] AMU1: TIMEOUT GetResults took 2490ms but was 100ms
[2013-08-26 14:35:36] Accepted 199c20c7 Diff 9/1 AMU 1
[2013-08-26 14:35:38] AMU0: TIMEOUT GetResults took 4164ms but was 100ms
[2013-08-26 14:35:38] Accepted 1fae288c Diff 8/1 AMU 0
[2013-08-26 14:35:49] AMU0: TIMEOUT GetResults took 11220ms but was 100ms
[2013-08-26 14:35:49] Accepted c4524192 Diff 1/1 AMU 0 I tried it on Windows computer with BitMinter client and it works normally at speed of 655Mh/s P.S. I am using powered USB HUB, because Windows computer canīt handle 2 Block Erupters |
|
|
|
|
Hello,
i am using slushīs pool, but it has 2% fee so i want switch to BitMinter which mining namecoins (namecoins on slushīs pool donīt work for me). But if i start CGMiner it says:
[2013-08-26 10:12:19] Started cgminer 3.3.4
[2013-08-26 10:12:19] Started cgminer 3.3.4
[2013-08-26 10:12:19] Probing for an alive pool
[2013-08-26 10:12:24] pool 0 JSON stratum auth failed: (null)
if i start BitMinter official client on Windows it works fine. Where is problem?
Thanks
P.S. i am trying it on Debian server via SSH terminal
|
|
|
|
Thank you very much, you helped me a lot. And what is your price if i sell you for example 1BTC?  |
|
|
|
|
Thanks again, and next important thing. Where i can get actual price of Bitcoin to USD?
|
|
|
|
Hello its again me I need to know something about fees. What is fee if i send money from my BitCoin wallet to somebody ? 0.005 ? Thanks It depends on the wallet. Sometimes some wallets will let you create a transaction with no fee at all. When a fee is required, it is often 0.0001 bitcoin per kilobyte. Thanks, so i can set settings in Electrum (default is 0.0005BTC per KB) to 0.0001BTC? Thanks |
|
|
|
|
