|
some pools die and no worker, what's going on net hash rate so high 100-> 140M ?
only nut2's hash ~ 8M, that's good now
|
|
|
|
This is a Deadcoin. Failed ipo on Bittrex
No exchange.
yes, and it dumps in bittrex.  |
|
|
|
Bollywoodcoin BDC market is now live on Bitttrex.  can not deposit Bolly coin into bittrex |
|
|
|
i ony have 137K EMC2 which's stuck in Mintpal.com Balances
EMC2
Balance
137,111.54528987 EMC2
Withdrawal Address
Withdrawal Status
Requested |
|
|
|
who can help me, what kind of best sgminer for 280X and the config to get 3xx on hash, because i used "sgminer-5.1-dev-2014-11-13-win32.zip", my hash of 280X is 283.
But i used "sgminer-5-dev-neoscrypt-windows.zip" or "sgminer-5-dev-neoscrypt-windows-Wolf0" and "wolf-neo-sgminer5-hawaii-11212014" ,
it only runs at 140, and with the config of Mr Wolf , so many HW.
Yeah, I think I might have statically linked against the AMD drivers - I'll need to fix it and re-release binaries >.< thank you so much. |
|
|
|
|
who can help me, what kind of best sgminer for 280X and the config to get 3xx on hash, because i used "sgminer-5.1-dev-2014-11-13-win32.zip", my hash of 280X is 283.
But i used "sgminer-5-dev-neoscrypt-windows.zip" or "sgminer-5-dev-neoscrypt-windows-Wolf0" and "wolf-neo-sgminer5-hawaii-11212014" ,
it only runs at 140, and with the config of Mr Wolf , so many HW.
|
|
|
|
i can't run mining as following http://cfg.ultracoin.net/ , all GPU : OFF in running my rig : win7 64bit 8G Ram VGA 4 x 280X my current config : yacminer --scrypt-chacha --worksize 128 -g 1 --lookup-gap 8 --buffer-size 3532 -R 7040 -o stratum+tcp://<pool address>:<port> -u <username> -p <password> --nfmin 4 --nfmax 30 --starttime 1388361600 ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 8 --thread-concurrency 226048 -I 12 -o stratum+tcp://<pool address>:<port> -u <username> -p <password> --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 |
|
|
|
eXtremal runs that pool, works fine for me btw, plenty of payouts Thanks for your confirmation, i'll move my rigs to this pool. |
|
|
|
beer and donate is okay dude and i always support devs but 45btcs ? wtf for kernels that may not work with newer drivers or may not work on all systems? its insane price for kernels for algos that no one knows how long they will be profitable(small profits after asics) 45btc good price for this kernel dude i wanna buy this kernel soon. get it soon, and do some reviews. |
|
|
|
Okay! Thanks Wolf0, we are now cooking with gas, smokin' etc etc. 7950 is getting a solid 125-130 with no rejects, work units 115/m or so. Can't tell me that a little brute force doesn't help, we're running at 1200/1500. Oh, worksize 48 and 1 thread, I-12. And a wups! Guess 1200 was pushing it, getting 123 at 1150, I'll live.
Has anyone had any luck with getting 6000 series cards working? My 6850 still craps out.
Got just over 200kh/s on my 7950, over 90kh/s for 270X, 280X does 220kh/s, and 290X about 245kh/s. Here's a (nsfw) screenshot with the miner, settings, clocks, and card types: https://ottrbutt.com/miner/neoscryptwolf-11022014.pngWOW, i used your file neoscrypt140909.cl with AMD 14.6 core/mem 1130/1500, 280x : maximum hash at 145kh/s in cgminer 3.7.7b. How can i get ver 3.7.7c as your pic |
|
|
|
How much khash does 280x speed when run UTC cgminer You probably should get about 4 khs maybe a little more but I don't have one so I can't say for sure. How much khash does 280x speed when run UTC cgminer It depends... 4-4.5 kh/s (as long as N=14) Sapphire toxic R9 280x with YACMiner (3.5.0-yac2) and only small amount OC 4.37 kh/s (gross) But real speed (what pool accepted) is somewhere around 4kh/s depending many things. (checked with pool accepted work and also miner WU over some hours) What are your bat file and AMD driver ? I config as http://www.ultracoin.net/configgen_raw.html but only get HW yacminer --scrypt-chacha --worksize 128 -g 1 --lookup-gap 8 --buffer-size 2590 -R 5120 -o stratum+tcp://<pool address>:<port> -u <username> -p <password> --nfmin 4 --nfmax 30 --starttime 1388361600 ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 8 --thread-concurrency 165760 -I 12 -o stratum+tcp://<pool address>:<port> -u <username> -p <password> --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 With low -I 10 --thread-concurrency 8192 i get only 0.8kh you can try: yacminer --scrypt-chacha --worksize 128 -g 2 --lookup-gap 8 --buffer-size 1295 -R 2560 -o stratum+tcp://<pool address>:<port> -u <username> -p <password> --nfmin 4 --nfmax 30 --starttime 1388361600 Not work.My 280X has max speed ~ 3k with "-g 1 --lookup-gap 8 --buffer-size 1776 -R 3584" ,"OFF GPU disable" with "-g 1 --lookup-gap 8 --buffer-size 2590 -R 5120" and "driver stop" with "-g 2 --lookup-gap 8 --buffer-size 1295 -R 2560" me too, my rigs can not run with 4G Ram system |
|
|
|
now it's a very hard time for miners.i think dev should decrease 5% fee.now 80% of mined coins should pay for electricity cost.miners only earn 20% ,however dev earns 5% ，that means 25% of miner's earning.
I agree. 2% is more reasonable. I also agree, 2% is fair. i agree 2% that's so good, because this time is hard for mining now, miner have to pay for 1-2% of pool and 5% dev. |
|
|
|
|
confirmed v5.0 run slower than v4.2, i'm back old version
|
|
|
|
My mining on your pool was OK some hours ago, but now : 11:57:57:385 b04 Stratum - connecting to 'bcn.extremepool.org' <216.119.175.35> port 5555
11:57:57:615 b04 Stratum - Connected
11:57:57:675 124 Stratum - connecting to 'bcn.extremepool.org' <216.119.175.35> port 5555
11:57:57:855 b04 got 88 bytes
11:57:57:855 b04 buf: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalid address used for login"}}
11:57:57:855 b04 parse packet: 84
11:57:57:855 b04 Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}} what's wrong to this pool, my rigs can not mine |
|
|
|
When do you payout ?
Pending Balance (minimum before payout 0.1)
Oh I see. The payout is every hour if you have 0.3 XMR. If you have less it is once per day. what's wrong to your site " Connection error" |
|
|
|
|
When do you payout ?
Pending Balance (minimum before payout 0.1)
|
|
|
|
yr site downs again |
|
|
|
thanks, can you send the link of file .bin for X13 ? |
|
|
|
|
Show Posts
