Since you are running on 192.168.0.x and the blade is on 192.168.1.x
You need to manually change the IP of your computer.
This is extremely easy to do.
1. Click on your connection status.
2. Click on Propreties
3. Double Click on Internet Protocal Version 4 (TCP/IPv4)
4. Click on use the following IP address:
5. put IP 192.168.1.10 (or any number)
6. subnet mask: 255.255.255.0
7. Gateway 192.168.1.1 (Not really inportant thought)
8. close box by clicking OK
9. close box by clicking OK
10. Connect to your blade 192.168.1.254?
11. Change the IP of your blade to 192.168.0.x (what ever IP you want)
12. Click on Update/reboot
13. Go back and do steps 1-3 again
14. Now put it back to "Obtain an IP address automatically" on the top part & on the bottom part "Obtain DNS server address automatically"
15. close box by clicking OK
16. close box by clicking OK
17. log into your blade under it's new IP 192.168.0.x (the IP you put in there)
And that's it!!
Looks like a lot of steps but it only takes about 30 seconds to do.