Show Posts
|
Pages: « 1 [2] 3 4 »
|
Guys I am still having issue installing this software on my mining rig and I cannot find a solution! Really would like to try the cryptonight algos on GGS!
|
|
|
Hey guys, I know that this is not the thread for my question, but can anyone tell me what type of timings do I need to choose for cryptonight-heavy? I have looked around, but sadly I was not able to find much information... I am mining on RX580 Sapphire Nitro Special Editions.
|
|
|
Dok I am having kinda of an issue with my rig when I remotely connect to it via TeamViewer. After 30-40 seconds one of my card crashes and the miner restarts. Could this issue be with the miner or with my rig in general? I have never had such problem before and I have tried many different miners so far.
I have noticed also the same problem, but I experience it with another miners too. The problem may be with your GPU itself.
|
|
|
#JOIN
Bitcointalk username: inv1s1bl3 Forum rank: JR. Member Twitter Profile: none ULTRANATUM address: UUnNDNpf6P89VTYnbqFk4MsA8m1eycLx3B
Hello, I would like to apply for the bounty campaign. Please tell me if I am accepted. Thank you in advance! Good luck with the project!
|
|
|
Dok, the miner shows locally 4.6 as speed, but the pool detects only 4.4. Earlier when I was using lower intensity I was getting locally less hashrate and the reported hashrate by the pool was quite bigger! Has anyone ever experienced something like that?
|
|
|
I still cannot install the 1.3.5 on my PC. The program is neither in add or remove programs, cannot find an uninstall file in the folder. How to proceed?
|
|
|
Geraldo, fanatic26 and all of you, who were involved with my problem - thank you very much for the support! I managed to fix the issue by exactly decreasing my virtual memory! Now I've got 50 gigs left! Thank you very much and sorry I haven't been much around, because I had to take some time off due to some personal stuff! Wish you guys all the best!
|
|
|
Seems like I cannot delete the file btw, here's a screenshot of the error message : https://imgur.com/a/aS079What to do? Can anyone advise something?
|
|
|
Hey guys, thanks again for the help! I have been occupied with some personal issues, that's why I have not been so active. I downloaded the windirstat program and it seems I have a file named pagefile.sys, which takes around 78 gigs of space. Should I delete the mf-ker or is that a windows file?
|
|
|
So, for the x16r should I revert back to stock settings or I can run it with my ETH bios mod?
|
|
|
1.4.0 was operating until now really stable! Trying out the newest version of the miner, will report laters. Good luck bois
|
|
|
when can we try the version with the x16r and s miners? And btw zawawa when I start benchmarking the cards I do not get any results! Why is that? The tests just run through without giving any data about the different algos
|
|
|
Already mining 24hrs+, the local results are 4.4kh/s, and by the pool i'm getting 4.8-5.2! Really incredible miner, thanks
|
|
|
Sumokoin, but I scanned the folder in the APPDATA hidden folder and it was not more than 200mb. When I get home I will run the website vlad, currently I am in the office and accessing my rig through TeamViewer, do not want something to get messed up and will update after I do it Thank you all for the cooperation so far <3
|
|
|
Dok and guys, I have a question to which I cannot find an answer. Did a lot of tweaking, testing and so on, but it really bothers me and I hope you might help me out here. https://imgur.com/a/3LePw - Here you can see what happens to my rig, when I set a higher intensity. At the moment I am running at 40 intensity, each card is hashing 900h/s stable and the power draw is 600W from the wall with the settings - 1200/2200 @ 950mvddc/cvddc settings. When I set a higher intensity, 40 at the moment seems to be the most stable, the cards go to a higher hashrate, as you can see in the screenshot, but after 2-3 minutes one or two cards start hashing a lot less than they should be hashing and all of the cards follow the trend in 10 minutes. How can I make all of the cards to hash at the best rate they may? If I set the intesity at 0, the miner picks 51 and two of the weaker cards fail Sorry for reposting, but can anyone help out please?
|
|
|
Mining for around 2 hours with 1.4.0 and have only noticed that the electricity consumption is moving +- 35-40w constantly. With the previous version 1.3.2 it did not fluctuate so much, it was only 5.
|
|
|
I did that from the start, managed to clear less than 300MB Did not work for me... That's why I started the thread, just because I cannot find what's causing this issue. I have also restarted the PC a couple of time, in case something has caused a bug in the system, but still nada.
|
|
|
What intensity should I be using for Cryptonight-Heavy? I am running my cards on 1240/2200, but when I start the miner I get a small error window, saying that the intensity is set to be too high and the miner crashes? Using the 1.3.2prealpha.
|
|
|
Hello guys! First of all, I would like to thank you all for taking the time to look at my thread. Last weekend I made a complete new OS install on my rig, completely formatting the whole SSD and afterwards I ofc installed the OS again. I have downloaded a couple of miners and just 1 wallet on my rig. I haven't been much in the net, just because I am kinda afraid of malware etc, so I am not really using the system besides mining. Yesterday I wanted to check something and saw that I have only 6.5GB free on my hard drive. I tried to delete everything I found not usefull, tried to delete downloads, cache, temp files but I was only able to free 500MBs. I scanned all folders I have on my C: drive and they are a lot less that 120GB - https://imgur.com/a/Qa5qk. So the question is what exactly is going on with the storage? I haven't enabled bitlocker or some encrypting software.
|
|
|
Wow, I am impressed with the results of the new 2.9b version on my rig with 5x AMD RX580 4Gb (Elpida): 2018.04.13:10:24:29.987: main *** 44:36 *************************************************** 2018.04.13:10:24:29.987: main Eth: Mining ETH on eth.coinfoundry.org:3073 for 36:54 2018.04.13:10:24:29.987: main Eth speed: 156.019 MH/s, shares: 24292/1/6, time: 44:36 2018.04.13:10:24:29.987: main GPUs: 1: 31.212 MH/s (4827) 2: 31.200 MH/s (4898) 3: 31.216 MH/s (4840/6) 4: 31.215 MH/s (4868) 5: 31.177 MH/s (4860) 2018.04.13:10:24:29.987: main Eth: Accepted shares 24292 (116 stales), rejected shares 1 (0 stales) 2018.04.13:10:24:29.987: main Eth: Incorrect shares 6 (0.02%), est. stales percentage 0.42% 2018.04.13:10:24:29.987: main Eth: Maximum difficulty of found share: 87.3 TH (!!!) 2018.04.13:10:24:29.987: main Eth: Average speed (5 min): 155.910 MH/s 2018.04.13:10:24:29.987: main Eth: Effective speed: 150.14 MH/s; at pool: 150.13 MH/s
Nice results there! Is the pool reporting the same, btw? I have noticed for the 12 hours I mined ETH, that the miner reported more stales than the pool Dunno who to trust, lol, but anyway 6 cards hashing waaay better than they should be, considering that they've been running 24/7 for the last couple of months, always squeezing them to their maximum limit I still get around 31.5mh/s on each card and that's reported by the pool, not locally from the miner.
|
|
|
|