Show Posts
|
Pages: « 1 [2] 3 »
|
Dear dev, I really look forward to the function of the failover pools in pools.txt file!
Hello, Why do you need a separate file for failover pools? You can fill your failovers in the config.ini file. Please see an example here: https://help.nanominer.org/article/159-cryptonight-r
|
|
|
Released nanominer v1.5.2
- Fixed low difficulty share issue while mining GRIN on AMD
|
|
|
Dear miners and friends This is nvOC Community Release based on the original nvOC easy-to-use Linux Nvidia by fullzeronvOC Community Release like the original nvOC is free and has No Dev-Fee. You can always check 1bash to find developers BTC addresses if you wish to donate. nvOC Community Release is set of scripts can be use in any Ubuntu system (need some expert edits) or use with provided images (Ubuntu 16.04/18.04) build with Nvidia individual card OC and individual card power limit support, manual fan support, auto launching on boot, auto switch coin based on wtm profits and a single easy to configure Bash Script (1bash) which can be configured from any computer using a text editor. With nvOC Community Releaed you can set almost anything you wish for in your mining rig and easily add any new coin, algo or miners from 1bash. Built-in Algorithms:
BITCORE CRYPTONIGHT CRYPTONIGHTHEAVY CRYPTONIGHTV7 CRYPTONIGHTV8 CUCKAROO29 CUCKATOO31 CUCKOOCYCLE DECRED ENERGI EQUIHASH ETHASH GRS LBRY LYRA2V2 LYRA2RE3 LYRA2Z MYR_GR NEOSCRYPT PASCAL PHI1612 PHI2 SIA SIB SKEIN SKUNK X13 X16R X21S X22I XEVAN ZHASH Builtin miners:
BMINER CLAYMORE CryptoDredge DSTM ENERGIMINER ETHMINER EWBF GMINER LOLMINER NBMiner PhoenixMiner Tpccminer T_Rex XMR_Stak ZENEMYminer Z_EWBF cpuOPT Available Settings: - Set Auto Start Miner on boot
- Set Auto Switching coins
- Set the GPUs you want to mine with
- Use TEAMVIEWER and set the resolution you want to use with it
- Auto Reboot rig timer
- Auto restart miner timer
- Schedule mining to stop and start between given times in a day
- Set your desired worker names
- Set to clear logs on reboot
- Use of SRR
- Control GPU LED and brightness
- Miner Watchdog: Monitors the rig and automatically corrects the detected problems if possible by restarting miner or rig
- Load Check to check system load average and reboot if needed
- Use sys request reboot or normal reboot
- WatchDog check cycle period
- Set Minimum GPU utilization threshold to warn and restart mining if it goes bellow
- Alternate pool settings
- Power limit and Overclock modes: Global, GPU Specific, Algo Specific, Global with GPU Offset, Algo Specific with GPU Offset
- Use Headless mode (for P100 card variants with no monitor output)
- Use OhGodAnETHlargementPill
- Miner Temp Control to automatically adjusts the fan speed to keep the desired temp
- Use manual fan control individual target temps
- Set Hot ShutDown to shutdown rig if temp exceeds
- Set TempControl check cycles
- Set Minimal and Maximal fan speeds
- Set Allowed fan difference, fan adjust and power adjust steps
- Foreman monitoring
- Supports Nicehash, Zpool and MPH Algo mining
Check contributors and all the settings available in 1bash.templateHello there, I'd like to ask you, is there any chance you can add Nanominer to nvOC? Here's the website: https://nanominer.orgThanks in advance! Sure will do, Send miner command line example and we will take a look into it. Please find the commands here: https://help.nanominer.org/article/169-main-settings and let me know if you have any questions.
|
|
|
hi there, Since ver 1.4 nanominer stopped laughing from win10 autostart. Can please advise, how ti fix it? Simple movement Miner shortcut into AutoStart folder did not work. Hey! We have just checked everything and it worked fine. Please make sure to use the latest miner version and follow this guide: https://www.thewindowsclub.com/startup-folder-in-windows-8
|
|
|
what is your performance using rx 5700 xt
The performance is low. However we hope it's going to be significantly better with further driver updates.
|
|
|
We added Ethash binaries for AMD Radeon RX 5700 and AMD Radeon RX 5700 X in nanominer v1.5.1 Performance isn't good but it may boost with next driver update.
|
|
|
In the latest release, we've added support for the upcoming GRIN hard-fork that changing Cuckaroo29 algorithm to Cuckarood29. Just make sure you set either (cuckaroo29 algorithm) or (coin=grin) in your config and your miner will automatically switch to the new algo after the fork with no restart. Also, we now support Nvidia (6+GB) for GRIN mining (Cuckaroo29/Cuckarood29). So if you have Nvidia GPUs, make sure to give it a try.
|
|
|
Hi, I'm using nanominer with awesomeminer and the hashrate is being reported as KH/s instead of MH/s. not sure if the problem is with AM or nanominer. thanks!
Hello! Kindly email your nanominer log files at: support@nanominer.org and we'll check if everything is correct.
|
|
|
Would be great to get support for Swap. I just heard this is the best AMD miner for cuckaroo. Is this true? Yes, indeed. Our team is working hard on optimization and improvements all the time! Greetings. Any news about Swap Cuckaroo29s support? The community would be very grateful. Hello there! No news so far. But we might add Cuckaroo29s algo support in future.
|
|
|
nanominer v1.3.0
- CryptoNightR and CryptoNightReverseWaltz algorithms support for AMD GPUs. - New option powerLimits to manage Nvidia GPUs power limits. - Added block acceptance time for QuarkChain. - Support any shard IDs for QuarkChain, including null for root chain mining.
|
|
|
Dear miners and friends This is nvOC Community Release based on the original nvOC easy-to-use Linux Nvidia by fullzeronvOC Community Release like the original nvOC is free and has No Dev-Fee. You can always check 1bash to find developers BTC addresses if you wish to donate. nvOC Community Release is set of scripts can be use in any Ubuntu system (need some expert edits) or use with provided images (Ubuntu 16.04/18.04) build with Nvidia individual card OC and individual card power limit support, manual fan support, auto launching on boot, auto switch coin based on wtm profits and a single easy to configure Bash Script (1bash) which can be configured from any computer using a text editor. With nvOC Community Releaed you can set almost anything you wish for in your mining rig and easily add any new coin, algo or miners from 1bash. Built-in Algorithms:
BITCORE CRYPTONIGHT CRYPTONIGHTHEAVY CRYPTONIGHTV7 CRYPTONIGHTV8 CUCKAROO29 CUCKATOO31 CUCKOOCYCLE DECRED ENERGI EQUIHASH ETHASH GRS LBRY LYRA2V2 LYRA2RE3 LYRA2Z MYR_GR NEOSCRYPT PASCAL PHI1612 PHI2 SIA SIB SKEIN SKUNK X13 X16R X21S X22I XEVAN ZHASH Builtin miners:
BMINER CLAYMORE CryptoDredge DSTM ENERGIMINER ETHMINER EWBF GMINER LOLMINER NBMiner PhoenixMiner Tpccminer T_Rex XMR_Stak ZENEMYminer Z_EWBF cpuOPT Available Settings: - Set Auto Start Miner on boot
- Set Auto Switching coins
- Set the GPUs you want to mine with
- Use TEAMVIEWER and set the resolution you want to use with it
- Auto Reboot rig timer
- Auto restart miner timer
- Schedule mining to stop and start between given times in a day
- Set your desired worker names
- Set to clear logs on reboot
- Use of SRR
- Control GPU LED and brightness
- Miner Watchdog: Monitors the rig and automatically corrects the detected problems if possible by restarting miner or rig
- Load Check to check system load average and reboot if needed
- Use sys request reboot or normal reboot
- WatchDog check cycle period
- Set Minimum GPU utilization threshold to warn and restart mining if it goes bellow
- Alternate pool settings
- Power limit and Overclock modes: Global, GPU Specific, Algo Specific, Global with GPU Offset, Algo Specific with GPU Offset
- Use Headless mode (for P100 card variants with no monitor output)
- Use OhGodAnETHlargementPill
- Miner Temp Control to automatically adjusts the fan speed to keep the desired temp
- Use manual fan control individual target temps
- Set Hot ShutDown to shutdown rig if temp exceeds
- Set TempControl check cycles
- Set Minimal and Maximal fan speeds
- Set Allowed fan difference, fan adjust and power adjust steps
- Foreman monitoring
- Supports Nicehash, Zpool and MPH Algo mining
Check contributors and all the settings available in 1bash.templateHello there, I'd like to ask you, is there any chance you can add Nanominer to nvOC? Here's the website: https://nanominer.orgThanks in advance!
|
|
|
nanominer v1.2.4
- QuarkChain shard option was renamed to shardid - Added farmRecheck option for QuakrChain - Do not show block accepted time for getwork protocol because it was calculated wrong. Will be added in some future update - Fixed some stability issues
|
|
|
nanominer v1.2.3 is already released.
- Fixed what needed fixing - Even more performance improvements for AMD on GRIN
|
|
|
Hi guys, We just released a new version of Nanominer that supports QuarkChain node for mining Ethash algorithm. We also added command line launching scripts for those users who need to launch Nanominer through the command line. And finally, we increased performance of Cuckaroo29 (GRIN coin) for AMD RX 580 8 GB up to 8%. Besides that, our team recently did some benchmarks of some GPUs. Here's what they got: GTX1050Ti 4GB - 12.5 Mh/s on Ethereum. 336.5 H/s on Monero. 439.9 H/s on Graft GTX1060 6GB - 20.1 MH/s on Ethereum. 484.7 H/s on Monero. 635.1 H/s on Graft GTX1070 8GB - 26.9 MH/s on Ethereum. 644.5 H/s on Monero. 847.1 H/s on Graft GTX1080Ti 8GB - 32.5 MH/s on Ethereum. 816.4 H/s on Monero. 1080 H/s on Graft P104-100 4Gb - 34.6 MH/s on Ethereum. 726.5 H/s on Monero. 951.2 H/s on Graft P106-100 6Gb - 21.2 MH/s on Ethereum. 511.7 H/s on Monero. 670.8 H/s on Graft RTX2060 6Gb - 27.1 MH/s on Ethereum. 628.2 H/s on Monero. 827.3 H/s on Graft RX470 4Gb - 21.9 MH/s on Ethereum RX480 8Gb - 27.5 MH/s on Ethereum RX550 4GB - 10.5 MH/s on Ethereum RX560 4Gb - 10.5 MH/s on Ethereum RX570 4GB - 24.6 MH/s on Ethereum RX570 16Gb - 27.6 MH/s on Ethereum. 2.3 G/s on Grin VEGA56 8Gb - 31.9 MH/s on Ethereum. 3.9 G/s on Grin Download here: https://github.com/nanopool/nanominer/releases/tag/v1.2.2Thankyou very much @nanominer.official for adding cmdline_launcher very much appreciated Best Regards Nemo It's a pleasure to provide features that our users would appreciate. Thank you for using nanominer!
|
|
|
You forgot to update the subject of your thread to v1.2.2 I have added your miner to my Latest Miner App. Yep, I did. All updated now, thanks for noticing! And thank you for adding nanominer to the list too
|
|
|
Are r9 390 8gb supported to mine grin 29
Yes, should be working fine.
|
|
|
Hi guys, We just released a new version of Nanominer that supports QuarkChain node for mining Ethash algorithm. We also added command line launching scripts for those users who need to launch Nanominer through the command line. And finally, we increased performance of Cuckaroo29 (GRIN coin) for AMD RX 580 8 GB up to 8%. Besides that, our team recently did some benchmarks of some GPUs. Here's what they got: GTX1050Ti 4GB - 12.5 Mh/s on Ethereum. 336.5 H/s on Monero. 439.9 H/s on Graft GTX1060 6GB - 20.1 MH/s on Ethereum. 484.7 H/s on Monero. 635.1 H/s on Graft GTX1070 8GB - 26.9 MH/s on Ethereum. 644.5 H/s on Monero. 847.1 H/s on Graft GTX1080Ti 8GB - 32.5 MH/s on Ethereum. 816.4 H/s on Monero. 1080 H/s on Graft P104-100 4Gb - 34.6 MH/s on Ethereum. 726.5 H/s on Monero. 951.2 H/s on Graft P106-100 6Gb - 21.2 MH/s on Ethereum. 511.7 H/s on Monero. 670.8 H/s on Graft RTX2060 6Gb - 27.1 MH/s on Ethereum. 628.2 H/s on Monero. 827.3 H/s on Graft RX470 4Gb - 21.9 MH/s on Ethereum RX480 8Gb - 27.5 MH/s on Ethereum RX550 4GB - 10.5 MH/s on Ethereum RX560 4Gb - 10.5 MH/s on Ethereum RX570 4GB - 24.6 MH/s on Ethereum RX570 16Gb - 27.6 MH/s on Ethereum. 2.3 G/s on Grin VEGA56 8Gb - 31.9 MH/s on Ethereum. 3.9 G/s on Grin Download here: https://github.com/nanopool/nanominer/releases/tag/v1.2.2
|
|
|
hash rates for veg56/64 on Grin. some benchmarks would be great
Just did benchmarks and we got 3.9 on VEGA56
|
|
|
Would be great to get support for Swap. I just heard this is the best AMD miner for cuckaroo. Is this true? Yes, indeed. Our team is working hard on optimization and improvements all the time!
|
|
|
Thanks for requesting this. We will take a look into supporting Cuckaroo29s algorithm.
|
|
|
|