 Show Posts
|
|
Pages: « 1 [2] 3 4 »
|
Yes I took the port number from sgminer config file, yes api is allowed and I forward the port 4028 trought the router!
This is from sgminer config file:
"api-mcast-port" : "4028",
"api-listen" : "true",
"api-allow" : "W:127.0.0.1",
"api-port" : "4028",
Wait a moment, what router? Do you run the client on mining machine directly? Yes it is on my rig directly and yes I have router? Why? If you run client on the same machine as the sgminer is working, you don't have to setup any port forwarding on router. What is interesting, even with proper setup there seems to be a problem with communication between sgminer and the client. The last try: please delete "api-mcast-port" line. I don't know what it is, but maybe it interferences with api-port setting. |
|
|
|
Yes I took the port number from sgminer config file, yes api is allowed and I forward the port 4028 trought the router!
This is from sgminer config file:
"api-mcast-port" : "4028",
"api-listen" : "true",
"api-allow" : "W:127.0.0.1",
"api-port" : "4028",
Wait a moment, what router? Do you run the client on mining machine directly? |
|
|
|
As someone mentioned on the reddit thread, you should consider having pre-compiled versions for some of the embedded miners, like KNC, Antminer, etc.
Sure I would that, however the problem is, that I don't own any of those devices. So far I only know that Avalon is running on OpenWrt, but it's hard drive and RAM it's rather too small to run Mono framework. I would have to somehow write another client... The way I see it for now is to have another machine, which would connect to those miners and it would monitor it from this another machine. This of course isn't perfect solution... reboot/restart worker commands won't work and we need another computer to run the client. Maybe you have any thoughts on this? If you want to give it a shot am in.
I tried to mod the API of the avalon and it did not want to work. I added W:192.168.1.2 to the miner and nothing works. problem do i think that the avalon system is linux i can't point it to the client "cgminer"
Any luck? We are working on that, I'll post the results here. Give us one week max. I have a problem with sending data to server:
02:24:08.26 Sending StatCgminer data.
02:24:08.26 Getting data for StatCgminer worker.
02:24:08.26 Sending { "command": "coin", "devs": "" } to cgminer.
02:24:09.26 Error occured while sending request to cgminer.
02:24:09.26 Error occured while sending request to cgminer.
System.Net.Sockets.SocketException (0x80004005): No connection could be made bec
ause the target machine actively refused it 127.0.0.1:4028
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddre
ss socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at CgminerMonitorClient.Workers.Cgminer.CommandSender.SendMessage(String mess
age, Int32 port)
at CgminerMonitorClient.Workers.Cgminer.CgminerWorker.GetStats(Config config)
02:24:09.27 Getting StatCgminer data failed. Sleeping for a 2s and re
trying
You sure its the right port number or can it be your router blocking it? Do you have the right API ip.
MinersEdge is (partly) right, this means that CgminerMonitorClient can't connect to cgminer. Please verify if you are hitting the right port (4028) and if you have configured cgminer to allow API calls, from "GetStarted" page:
Configure cgminer:
Pass additional command-line arguments: --api-listen --api-allow W:127.0.0.1
Or add additional configuration file entries: "api-listen" : true, "api-allow" : "W:127.0.0.1"
|
|
|
|
Many thanks booz, I'll fix that soon. |
|
|
|
On my 5 port modem router.
To access the web of the avalon i need to type 192.168.1.2 for my 200 gh/s and 192.168.1.3 for my 60 gh/s
That means you have to point CgminerMonitorClient to this IP address. I can prepare a new beta version which would allow to specify IP. nvm it does not work with a avalon
How do you know? I think that with small modification it would work. |
|
|
|
To config the avalon i need to login to the ip from the web. I have a screen that i can add 3 pools and so on with you like me to send you pictures and we can go from there. The cgminer is installed in the avalon it self
Is it connected to a computer or to a router? Can you access it by local machine (localhost/IP:127.0.0.1)? |
|
|
|
Anyone know how to make this run on a avalon 180 ghs/ miner?
Sorry for late response, do you have a specific problem? I don't know anything about avalon, but I assume it has cgminer API. |
|
|
|
all of my bin files are being created inside my cgminermonitor folder (instead of my sgminer folder). Is this normal? Or is there a way to have them only create in the sgminer folder instead?
What bin files? If that bin files from sgminer I recommend you to check if you navigate to proper directory when launching sgminer. Is there a way to Display the pool name on the shared rig page?
Instead of "stratum.nicehash.com:3340" show "NiceHash-Nist5".
The problem with that functionality is that not all mining software allows you to specify name of a pool. Therefore for now there is no such a possibility, sorry. |
|
|
|
|
Yeah, I have thought about that Chris. However, I found that it is both easy to make a mistake and hard to explain what the user should enter to this textbox. Let's stay with simple current move up/down for now.
Pro tip: you can click move up a pool two times without waiting for previous command to execute. CgminerMonitor just schedules to execute "POOL_URL move up" not "POOL_NUMBER move up".
|
|
|
|
I didn't "have" to use Ctrl+F5 but did so because it was quicker/easier than logging out of the site and then logging back in. That probably would've fixed it too.
Now you can change to pool, which is in fact setting pool's priority to 0. Do you have something else in mind? How do you imagine that?
Right now, the priority for my pools are this: 0: Enabled Strtm Quota 1 Pool 0: stratum+tcp://r6283.g20.rigs.eu.betarigs.com:9115 User:chrison999-6283 1: Enabled Strtm Quota 1 Pool 1: stratum+tcp://us.clevermining.com:3333 User:1KW9fnXHgQSjEq7RNDWAbgx6DY68rgXVrm 2: Enabled Strtm Quota 1 Pool 2: stratum+tcp://pool.ipominer.com:3333 User:corion49.USB4 3: Enabled Strtm Quota 1 Pool 3: stratum+tcp://multi.ghash.io:3333 User:chrison999.USB4 4: Enabled Strtm Quota 1 Pool 4: stratum+tcp://mine.multicoinpool.org:3310 User:chrison999.USB4 I'd like to change the priority so that ipominer has a higher priority than clevermining, like this: 0: Enabled Strtm Quota 1 Pool 0: stratum+tcp://r6283.g20.rigs.eu.betarigs.com:9115 User:chrison999-6283 1: Enabled Strtm Quota 1 Pool 2: stratum+tcp://us.clevermining.com:3333 User:1KW9fnXHgQSjEq7RNDWAbgx6DY68rgXVrm 2: Enabled Strtm Quota 1 Pool 1: stratum+tcp://pool.ipominer.com:3333 User:corion49.USB4 3: Enabled Strtm Quota 1 Pool 3: stratum+tcp://multi.ghash.io:3333 User:chrison999.USB4 4: Enabled Strtm Quota 1 Pool 4: stratum+tcp://mine.multicoinpool.org:3310 User:chrison999.USB4 Currently, to do that using the CgminerMonitor site I'd have to delete all of the pools except betarigs and recreate them in the order that I want. I saw this in the API-README for cgminer: poolpriority|N,... (*)
none There is no reply section just the STATUS section
stating the results of changing pool priorities
See usage below
The 'poolpriority' command can be used to reset the priority order of multiple pools with a single command - 'switchpool' only sets a single pool to first priority. Each pool should be listed by id number in order of preference (first = most preferred)
So, I'm wondering if it would be too difficult to implement the 'poolpriority' command as part of the site. Thanks! Regards, Chris Chris and all, I've just updated worker details page - the pools section. Now you can change pool priority - move it up and down  |
|
|
|
I cannot start up the client (Also miner is running on PiMP 1.5.5)  For PiMP > 1.5 please follow "Linux (BAMT)" instructions. |
|
|
|
Great program, testing it out now; is it possible to use the build from source method on BAMT? Killed my rig today trying to do it remotely.
Yes it is. Please use "Compile from source" instructions on http://cgminermonitor.com/GetStarted page. If that was your way, please add more details what happened. |
|
|
|
Yeah! Great job, cgminermonitor! Controla worked at first try!  Thank you! Another suggestion ? Maybe a PRO feature: Set a auto-start for cgminer/sgminer/etc process on failure or after a host reboot/power cycle. Yeah, that would be cool! What is more, there could be something like restart process/reboot after detecting dead GPU etc. |
|
|
|
Ok.
I tried with bfgminer 3.10, embedded on hashra controla image for pi, but only returns a error message - 06/21/2014 02:54:13.86 Error occured while sending StatCgminer data. Error code: BP, Message: Apikey: e099af4ebd904d3baaf9909523119af9. Bad parameter 'Stats': , and cgminermonitor dashboard always shows "no data colleted" for this worker.
Double checked API key, recompiled client, that was done without errors, but error message persists.
EDIT: Strangely, same build works like a charm in minepeon 0.2.4.5, that use same version of bfgminer.
Maybe custom version of bfgminer ?
Hey, I've just uploaded fix for that (the client remains the same, change is on server), please try it now. Sorry for troubles, they've changed linux core. Please use BAMT instructions for PiMP version equal or greater than 1.5, I'll update GetStarted page soon. And, can you accept a suggestion ?
If, possible, we can get a totalized hash rate by crypto protocol ( sha256, script, x11, x13, ... ).
Sure, I was thinking about that too. For sure I will add that in future, however I cannot say precisely when. Feature request... it sure would be nice to be able to reorder the pool priorities. Is it possible to add that?
There are small complications with this feature... but despite that you can expect it next week. No, Windows ofc, I always read the faq Only error is that it says: Error occurred while sending StatHardware data. When running it with -v it says: Error code: UE, Message: Wrong Input Data I will update the client to allow me to figure out what is going on. For now there was no problems with that.. Client updated, however it's small change and I don't want to publish new version. I've sent you PM with link to compiled Windows version. Please run it with additional parameter dumpFile, like this: CgminerMonitorClient_Windows.exe -dumpFile=test.txt after a while it should create two files, send me them in PM. |
|
|
|
Ok.
I tried with bfgminer 3.10, embedded on hashra controla image for pi, but only returns a error message - 06/21/2014 02:54:13.86 Error occured while sending StatCgminer data. Error code: BP, Message: Apikey: e099af4ebd904d3baaf9909523119af9. Bad parameter 'Stats': , and cgminermonitor dashboard always shows "no data colleted" for this worker.
Double checked API key, recompiled client, that was done without errors, but error message persists.
Maybe custom version of bfgminer ?
Thanks for detailed description. It's slightly different data format, however I'll try to fix that in two/three days. Sorry to keep you waiting! |
|
|
|
|
Thanks, I get what you need. I'll look at that next week because soon I'm living for some holidays.
|
|
|
|
Please log out and log in. If you have still issues, press Ctrl+F5 to "hard refresh" the website (while being on dashboard page).
Ctrl+F5 fixed it. Silly me! (blush!) Thanks! Chris Well, strange that you have had to do that - I always try to avoid that. Feature request... it sure would be nice to be able to reorder the pool priorities. Is it possible to add that?
Thanks!
Regards,
Chris
Now you can change to pool, which is in fact setting pool's priority to 0. Do you have something else in mind? How do you imagine that? |
|
|
|
I just finished getting CgminerMonitor running on my Raspberry Pi that's controlling 3 gridseeds and 5 GAWMiners furys. Looks great, although there is a display problem with the chart for CrazyCanuck Rig #2A for some reason: http://tinyurl.com/CrazyCanuckAny ideas how to fix that minor glitch? Thanks! Chris Chris, thanks for reporting that! I'll fix that as soon as remote management will be published. I've just fixed that glitch. Your dashboard looks perfect now Thanks for the info on the config file... that's really helpful. However, I'm still having issues with the graph display: http://imgur.com/Qfm2EcjThanks again... Regards, Chris Please log out and log in. If you have still issues, press Ctrl+F5 to "hard refresh" the website (while being on dashboard page). |
|
|
|
do massive controlling for rigs
i have 50 rigs on pimp
and its hardly to change pool on all of them
or change configs on alls rigs
I've added 'select all'/'deselect all' options on http://cgminermonitor.com/WorkerRemoteControl/Manage page. Hope you will like it. I just finished getting CgminerMonitor running on my Raspberry Pi that's controlling 3 gridseeds and 5 GAWMiners furys. Looks great, although there is a display problem with the chart for CrazyCanuck Rig #2A for some reason: http://tinyurl.com/CrazyCanuckAny ideas how to fix that minor glitch? Thanks! Chris Chris, thanks for reporting that! I'll fix that as soon as remote management will be published. I've just fixed that glitch. Your dashboard looks perfect now Could someone post a config file for version 0.0.7.0 please? I had to re-install everything and lost my configs, and now I'm not completely sure what each parameter means and what should go in them.
Thanks.
Chris
P.S. Maybe you could update the config.md file in the doc directory for the next release too?
Thanks for information about config.md, I'll update it soon. Here is example config file: {
"ClientVersion": "0.0.7.0",
"CgminerPort": 4028,
"WorkerApiKey": "2ef2ef2ef2ef2ef2ef2ef2ef2ef2ef2e",
"CgminerProcessName": "cgminer",
"ControlOptions": {
"AllowWorkerPowerControl": true,
"AllowCgminerPowerControl": true,
"AllowCgminerConfigReadingAndWriting": true,
"AllowCgminerControl": true,
"CgminerStartCmd": "sh -c '/home/xxx/Dropbox/miners/cgminer/manualmine_xxx.sh'",
"CgminerKillCmd": "pkill -9 \"cgminer\"",
"CgminerConfigFileLocation": "/home/xxx/Dropbox/miners/cgminer/cgminer_xxx.conf",
"WorkerRebootCmd": "shutdown -r 1",
"WorkerShutdownCmd": "shutdown -p 1",
"RootPrivilegesCmd": "whoami",
"RootPrivilegesCmdResult": "root"
}
}Edit: just updated config.md: https://github.com/cgminermonitor/cgminermonitorclient/blob/master/doc/config.md |
|
|
|
do massive controlling for rigs
i have 50 rigs on pimp
and its hardly to change pool on all of them
or change configs on alls rigs
Could you explain what do you mean? The site is slow or you need additional functionality? No, Windows ofc, I always read the faq Only error is that it says: Error occurred while sending StatHardware data. When running it with -v it says: Error code: UE, Message: Wrong Input Data I will update the client to allow me to figure out what is going on. For now there was no problems with that.. |
|
|
|
|
