 Show Posts
|
|
Pages: « 1 [2]
|
It takes 150 confirmations on tradesatoshi to make my XMG available for trading.
That's insane.
But better then Yobit, never trade on Yobit.
Your coins get lost in a forked chain.
Only use tradesatoshi or nova exchange (not for US, i believe)
I don't know other exchanges for XMG.
they both are not for US but i still trade on them. it's not hard to mask your IP to say i live in EUROPE =] so anybody on here has experience mining magi with raspberry pi??? looking to find out if there any new updated cpuminer for them.... |
|
|
|
50 is not a minimum, you can stake with 15-20 xmg, only not always succeed. You don't need exactly minimum 50 xmg.
Right, but use coin control to make one block. so i have one block set with 91 coins and the confirmation is at 701 than i received a transaction in middle of the night at some point from coinmagi pool.... confirmation at 202 and my wallet says not staking still....... is that because of the new incoming transaction from auto payment??? Just wait a little bit longer, I guess. My blocks start staking from 1500 - 2000 confirmations. i made a new transaction to myself to put all the coins into one block and test......... i am curious do i manually have to keep transferring coins to myself after they stake? i want to setup a pi zero to run 24/7 and just have it stake. my example would be like have a fresh wallet on pi zero w and keep it staking and every week transfer coins to it from my pc when i trade off the BTC to XMG on tradesoatoshi. since it been taking me weeks to trade my BTC to XMG. been looking at the staking on the https://chainz.cryptoid.info/xmg/address.dws?9MDFWb9rGPaH3ZFR9j9goJHpVFa6ctnGWm.htm to see what people are getting for staking and it seems like a tiny amount but its worth it for having coins sit in my wallet doing nothing any ways. Try the network, inhale its breath. Give it a shot. Transaction u made was banished from the blockchain, now all validators are advised to add the transcript of the transaction to their black lists as a gesture of organized solidarity against the malevolent action which is flagged by all nodes as a source of peril danger. I came here to testify that this time u succeeded with what u did to compromise the network. This was the first and the last time. what you talking about being black lists?  ?? |
|
|
|
is their a setting to change to allow me to split the exact amount of coins to stake???
thanks,
mike
You can use coin control (gui) , or stakesplitthreshold/stakecombinethreshold (magi.conf) # Transaction under stake with a value greater than the threshold is being splitted (500, 1000, 5000) stakesplitthreshold=500 # Transactions with values less than the threshold will combine into one (250, 1500) stakecombinethreshold=250 I use only one address for staking and put all my coins in that address. Then with coin control i split my coins in blocks. With your amount of coins i would put them in one block. so you dump all your coins into a address for staking..... so does it automatically split the coins into blocks on it own or do you have to manually send to yourself??? so the second value put blocks into 250 if if under the "confirmation amount" for the proper weight to start staking? looks like you have it setup to blocks of 500 if meets threshold and 250 if under threshold..... am i right? |
|
|
|
how can you setup your wallet to have multiple amounts staking at a time? noticed on https://chainz.cryptoid.info/xmg/#!network some people have their wallet setup at a 15-25min interval of PoS going on like 350+ per stake. im curious if i can do 175 coins at a time buy have two generating. for me i keep getting 257 coins only to stake and the 120 coins just sit there collecting weight not staking. got to 2287 confirmations and it never went to the PoS part like the 257 coins did, but on the bottom right of the wallet it kept telling me "staking generate rewards 22hrs " never changed time and i assume it meant that time for the 257 coin block. what i did now was transfer all 357 coins to myself into one block in hopes that would stake that entire amount. is their a setting to change to allow me to split the exact amount of coins to stake??? thanks, mike <----- that's the address i was looking at encase you need to see what i am talking about |
|
|
|
how can you setup your wallet to have multiple amounts staking at a time? noticed on https://chainz.cryptoid.info/xmg/#!network some people have their wallet setup at a 15-25min interval of PoS going on like 350+ per stake. im curious if i can do 175 coins at a time buy have two generating. for me i keep getting 257 coins only to stake and the 120 coins just sit there collecting weight not staking. got to 2287 confirmations and it never went to the PoS part like the 257 coins did, but on the bottom right of the wallet it kept telling me "staking generate rewards 22hrs " never changed time and i assume it meant that time for the 257 coin block. what i did now was transfer all 357 coins to myself into one block in hopes that would stake that entire amount. is their a setting to change to allow me to split the exact amount of coins to stake??? thanks, mike |
|
|
|
so i have noticed that my staking only works on one block when i have two separate addresses for staking labeled as follows: staking staking 2 this is done so i can have coins availlable between staking since i noticed it takes 1800+ confirmation before it goes into staking transaction. but staking 2 never leaves. is it because i am only allowed to stake once at a time? any information would help due to the fact i always need 100-150 coins available for trading on satoshi trade, its crazy i doubled my magi coin in less than 24hrs due to people trying to quick sell =] |
|
|
|
50 is not a minimum, you can stake with 15-20 xmg, only not always succeed. You don't need exactly minimum 50 xmg.
Right, but use coin control to make one block. so i have one block set with 91 coins and the confirmation is at 701 than i received a transaction in middle of the night at some point from coinmagi pool.... confirmation at 202 and my wallet says not staking still....... is that because of the new incoming transaction from auto payment??? Just wait a little bit longer, I guess. My blocks start staking from 1500 - 2000 confirmations. i made a new transaction to myself to put all the coins into one block and test......... i am curious do i manually have to keep transferring coins to myself after they stake? i want to setup a pi zero to run 24/7 and just have it stake. my example would be like have a fresh wallet on pi zero w and keep it staking and every week transfer coins to it from my pc when i trade off the BTC to XMG on tradesoatoshi. since it been taking me weeks to trade my BTC to XMG. been looking at the staking on the https://chainz.cryptoid.info/xmg/address.dws?9MDFWb9rGPaH3ZFR9j9goJHpVFa6ctnGWm.htm to see what people are getting for staking and it seems like a tiny amount but its worth it for having coins sit in my wallet doing nothing any ways. |
|
|
|
50 is not a minimum, you can stake with 15-20 xmg, only not always succeed. You don't need exactly minimum 50 xmg.
Right, but use coin control to make one block. so i have one block set with 91 coins and the confirmation is at 701 than i received a transaction in middle of the night at some point from coinmagi pool.... confirmation at 202 and my wallet says not staking still....... is that because of the new incoming transaction from auto payment??? |
|
|
|
hey i am 3 coins short to making the 50. if anybody like to donate some so i can learn how to stake and see what it's all about my wallet address is: 9FwLwbUYtKUQY86wKQ6gUYByp8yoXTfmzY waiting on my trades from satoshitrade to go through so i can get more coins to stake but it seems like nobody selling their XMG for my BTC =[ =[  thanks in advance, this is a learning process for me and im starting to look at other CPU coins but that DOGE is way out of the realm of using a pi cluster. have no idea how these people are mining such high hash rates but going to give a i7 gen 2 a shot and see how much more it is over my pi cluster (currently at 3 and ordered 4 more)  `bigstinker |
|
|
|
|
having trouble changing my gui setting from mXMG to XMG in the wallet. tried everything in settings on the GUI and it won't keep it at XMG... any suggestions?
|
|
|
|
so im kinda lost, now that i have 2 coins in my wallet with 800+ confirmation per transaction the wallet still tells me not enough weight. though it goes by confirmation amount to verify age of coin.
any information would be great becuase of the chart i seen earlier in this forum it shows by confirmation for age of coin. if i am wrong let me know plz
thanks,
mike
2 coins is not enough for staking, you need at least 50 coins. (but 50K in blocks of 750 works better) Look for an example here : https://chainz.cryptoid.info/xmg/#!extractionThese are addresses staking, click an address and see the information. yea i feared i needed a lot more coins, noticed that 90% of those staking have 15k + coins. i started late and using magi as a learning experience. its kinda crazy how much some people on minerclaim making coins with that high has rate they got. i can't figure out if their electric bill even worth the .05 USD per coin hahaha either way i am mining now on 2 raspberry pi 3 and soon to have more. i am curious if there a way i can drop like $10-15 in tradesatoshi and pick up more magi......do i need to have some sort of government ID to put cash in through say a pre paid credit card |
|
|
|
|
so im kinda lost, now that i have 2 coins in my wallet with 800+ confirmation per transaction the wallet still tells me not enough weight. though it goes by confirmation amount to verify age of coin.
any information would be great becuase of the chart i seen earlier in this forum it shows by confirmation for age of coin. if i am wrong let me know plz
thanks,
mike
|
|
|
|
Alternative contact info for manager of luckypool? Having problems with account modification, and other things. Site's web-form contact page doesn't seem to be getting a response.
okay so i been mining for a few months now and i have noticed a lot of the pools on the beginning page are not active 404 error. Also read that the developer Joe isn't as active as he was due to moving into a new home and such, yes kinda stalking and i have learned about the huge drop in the XMG value drop in late 2017 to end of 2018. im happy MAGI still alive, i would like to try and see if anybody on here able to refresh the information page to help new people in the crypto world. i am starting to get my students into the crypto world mining on SBC (raspberry pi) since my department received several hundred of theses devices from a grant. it has sparked interest in several students but they all have come up to me with concerns about the future of MAGI and how some people are mining this coin with GPU using some kind of fork getting their hash rate over 200K H...... its discouraging for me seeing this but i think some of you can help. i plan to check back every few days. hope i can get some fresh information on this and i have been on tradesatoshi trading XMG to DOGE coin and that into ETH. kinda making progress since i started with only 6.2 XMG i am now at BTG=0.01996659 =] so my goal is to get BTG to 1.0 and trade that off to around 7500 DOGE and pick up around 400 XMG to start staking and learn what PoS is all about sincerely, the big stink AKA mike =] |
|
|
|
|
