 Show Posts
|
|
Pages: « 1 [2] 3 »
|
|
take the fan apart and clean it and lube it (i use 0-30 synthetic engine oil).if you have old fans laying around practice on them,take the sticker off, pull the plug,and there's a plastic clip that holds it together.
|
|
|
|
|
around 770 with a 5830 1025/300,5850 925/300 and a 4830 750/700
|
|
|
|
|
what power supply are you running?
|
|
|
|
|
i just started playing around with an old 4830 i have laying around.i found the best is -v -w128 -f1.i also found that underclocking the memory below 700 cuts the hash rate.At 750/700 i get 75 Mhash.The latest version of sapphire Trixx works with the 4830
|
|
|
|
I'm amazed. Looking at these threads I can tell you who is really rubbing their hands about bitcoin... XFX, Sapphire and ATI. Suddenly all their old 5xxx series GPUs are flying off the shelves!  I don't think so,i think bitcoin has hurt 6850 and 6870 sales.I think anyone buying 6950/6970 get them to mine with now but game with after bitcoin |
|
|
|
|
Average in last 24 hours: 1633052 (-10.6%)
even better
|
|
|
|
|
have done 2 orders with cablesaurus and both orders went well,fast shipping and communication.Would definitely recommend.
|
|
|
|
|
what are you using to lower the speed?when i used afterburner i had this same problem,with trixx i can lower the speed to 300 with no problems
|
|
|
|
|
did you try reseating the card in the slot?or try another card in that slot?
|
|
|
|
|
I got an x16 extender from cablesaurus and it was double cable but it's been working great for 2 months i even gamed with it
|
|
|
|
it's hard to tell from the pictures,but are the x16 extenders double or single ribbon?
is there such thing as single ribbon since pci-e is double sided? i've seen pictures here of a burned extender cable and it looked like a single cable |
|
|
|
|
it's hard to tell from the pictures,but are the x16 extenders double or single ribbon?
|
|
|
|
|
yes,xp 32 bit sp3 the computer was pretty much unusable it took about 10 seconds to get the mouse pointer to move over to stop guiminer
|
|
|
|
|
the same thing happened to me,reinstalled the 11.6 and everything is good again
|
|
|
|
|
check it again we just finished a 2 hour block,but the luck has been pretty damn good
|
|
|
|
some scrap wood and dry wall screws,it's not pretty but it works well  |
|
|
|
|
70C is fine but for me it's to high,my 5830@1000 run high 50's low 60's.download gpu-z and see what your vrm's are at (gpu temp #2) they usually run 5-10C higher than the core
|
|
|
|
|
Whats going on with the stats?I'm showing .22 over the last 24 hours but i've generated .39 over 23 hours.and i'm running prop.
edit: never mind it was on my end,i some how set one of my workers to pps
|
|
|
|
|
