Hey minerjones,

Thank you, I appreciate it!

Dimensions of the full piece are,

Length top to bottom: 7 Inches
Width side to side: 3 Inches
Height: 0.54 Inches
Weight: Roughly 13.4 Ounces

Awesome, Thank you!

Not sure what the issue was for me with the images but I appreciate it.

Yes, you are correct on price and only $10 shipping for both total. These pieces are not numbered.

I really appreciate your continued support digicoinuser!

Hey Bullion-n-BTC,

Thanks for the quick support on this post! These pieces are not numbered, if that changes anything let me know.

Sentinel Bitcoin is back with a second release! Orange Pilled is a full DIY cold storage wallet that doubles as a showpiece and conversation starter to orange pill the people around you. This wallet consists of six different components. One main orange body (the pill), one Bitcoin logo insert, two pieces of glass, one pill capsule, and one tamper proof hologram.

The design features a hole in the side of the Bitcoin logo insert to hide the pill capsule. When completed the pill capsule will house a rolled up paper with the private key you generate. The main body piece will have “hanging marks” due to the anodization process from the manufacturer. As seen in pictures, these are small marks on one side of the piece.

The DIY aspect of this wallet includes a few decisions on the owners end. The two decisions come into play with the tamper proof hologram and the direction you insert the Bitcoin logo piece. As for the tamper proof hologram you can place it directly on the orange body piece in any location you like as seen in the pictures or you can cover the hole with the tamper proof hologram. If you decide to leave the hole uncovered by the hologram (which I believe is preferable for this reason), when the piece is fully sealed by the glass you will be able to angle the whole piece so that pill capsule slides out a little bit ultimately hitting the inside wall of the orange body blocking it from fully falling out (see pictures below) which can then be angled back to slide it in hiding the pill again. The next decision comes when you place the Bitcoin logo insert into the main orange body. You can place it with the Sentinel Bitcoin Logo (SB) on the front side or on the back side depending on your preference. Placing the SB logo on the front side allows the tamper proof hologram to go on the back side in the same position for a clean look.

****The glass will need to be attached with glue. I will attach one piece of glass before shipping unless specifically asked not to. The glue I have found to work well is two very small dots of Clear Gorilla Glue, one at the top and one at the bottom. I can also attach the tamper proof hologram (if placing directly on the orange body piece) upon buyer request.****














The price for this wallet is $250 plus shipping which can be paid in BTC to the address below or as a Zelle transfer to the account below.

Shipping within the US will be $10
Shipping international outside the US will be $25

I also have this option available, one Bitcoin logo piece with an orange pill capsule and tamper proof hologram. This option is available for $50 plus shipping. (These Bitcoin logo pieces do not fit into the main orange body piece so they are a stand alone piece.)





BTC Payment Address: bc1qa3q240thcwky99rjk4rdaawjvt0jv5pq8rzfmj

Zelle: support@sentinelbitcoin.com

I will confirm order and then you can pay/send me shipping address + TX ID

Hey Mark,

Replying here as well. Price is same to everyone. I will be creating an updated post with what I have remaining in the near future. In the meantime if you are interested send me a PM.

Hey bitcoinbass,

Thanks for your interest. Yes, I do.

Hey Kryptowerk,

Glad you finally got it in hand! Thanks for the review and feedback, it’s much appreciated.

    Love the pic!

Still working on the glass issue, another group member is really helping me out with some different testing options.

Yes, I do have some still available but only the fully completed version. All the DIY ones I had have been sold. I will update if we come to a solution and can offer more DIY.

As far as the growth it seems you’ve been feeding it well    Good luck with large Iguanas!

Thanks for the feedback I always appreciate it!

Yes, to my knowledge all companies ordered from are US based. The CNC company for the metal does have locations around the world as well though.

Thank you for the compliments and support I really appreciate it.

Thank you I appreciate the compliment. Also, I have not tried or thought of dry ice. That is very interesting and I will look into it. Thanks for the tips and input as well.

Yes that definitely sounds like it would work. The problem with that is I had the metal pieces made by a manufacturer so I don’t personally have the CNC to re-machine them. Appreciate the input.

I briefly tried a torch and it didn't seem to do much. I could explore that a bit more but was mainly concerned about discoloration in the metal due to the flame or heat.

I tried a dremel but the problem is anything super abrasive will damage the metal underneath and that essentially ruins the look of the piece as well. I have tried many different solutions to dissolve the glue but none have worked.

Lot 2: 0.0122BTC

Lot 2: 0.0116BTC

I’ll take one of the Cryo Chamber cards. The .00735510 value please.

Lot 3: .018BTC