Can/should i take my BTC wallet address out of the MPM bat file if i am only using the MPH pool and am going to set my auto exchange Litecoin?
Best leave it in for backup but you can remove it. |
|
|
|
as far as i knw excavator you are using was develop by nicehash. As they developed it they will lock it up only to be used for their pool. Greedy nicehash is to blame. It is best that we as miners exercise due diligence.
yes excavator was & it is dev by ppls what was & work for nicehash, but that not means is working only on they'r pool if you was read what i was write is working perfectly on Nano, Supernova, zpool or on any other ... only on here is not but if admin of pool decide to ban a miner apps is his decision  NiceHash blocked MiningPoolHub on Excavator. |
|
|
|
From another thread: I wondered why miningpoolhub was so abysmally slow, then found out they ratcheted their difficulty down to the minimum to cost users money and power and time but make it so their inadequate servers could keep up.
Sad to think that a business that is there, ostensibly, to be a facilitator of mining would attack their users in this manner rather than upgrade. I was getting 1/6th the usual rate on Lyra2REv2. After I found that tidbit, I realized why miningpoolhub sucked so very, very badly. Oh, and they never answered any tech support questions. Bad pool. Bad software. Just bad, all around.
Ah, yes, not many were ready for the outflux of users from Nicehash. But, they will be back to business as usual after the people flee their pools and software to go with far more trustworthy nicehash. Nicehash has answered every question I have ever thrown at them.
LOL, the hash from NiceHash went to MiningPoolHub anyway. All MiningPoolHub has ended up with is the hash split up amongst loads of users. The Equihash difficulty is variable over time, not fixed. The problem with Lyra2REv2 has always been the miners, not the pool. MiningPoolHub is 10x bigger than even Zpool. Scaling is more than just pure resources; the software has to be continually improved from the original open source project. NiceHash is not a pool and they take huge percentages from both sellers and buyers. If pools charged the same fees then they could employ people like NiceHash has. |
|
|
|
None that I'm aware of; the exchanges are not performed by the pool (the exchanges are Bittrex, Yobit and Poloniex).
Please can you provide the information that you are looking at to make the comparison?
I am not even going to bother. This pool is dubious, here-today-gone-tomorrow. Dubious is not really the right word but it can be quite confusing to a lot of people. Looking forward to the new dashboard. |
|
|
|
is there something wrong with eth pool?
thanks
Mego
I've got no problems... why? Are you having issues? |
|
|
|
Are there any issues again with BTC auto exchange?
I have only received half of what I am suppose t receive. Whats going on with this pool?
None that I'm aware of; the exchanges are not performed by the pool (the exchanges are Bittrex, Yobit and Poloniex). Please can you provide the information that you are looking at to make the comparison? |
|
|
|
If you are confused then just leave the pool to do its work unless you have a more specific question about the information you are looking at.
Very big stupid anwser.  I try my best. |
|
|
|
Hi, i have a few questions about hasherate and auto switch algo.
I use awesome miner set to only mine Lyra2rev2, Lyra2z and equihash and autoswitch every 45min. I have miningpoolhub set on nvidia for the same algo switching.
What i see on dashboard or on pool stat in miningpoolhub, my estimate hashrate/earning per day of x coin lets use lyra2rev2 for exemple. My problem is it take around 30 min of mining to show my almost real hashrate on miningpoolhub, but if miningpoolhub decide monacoin is less profitable and switch to vertcoin then my hashrate goes back to poo at half maybe less 60mh instead of 120mh, so if that happen multiple time i get stuck on those low number.
This means i am only getting half of the earning most of the time. What am i doing wrong? or do i get it complety wrong.
I saw on reddit that MultiPoolMiner may be better, why is that? better implamentation with mining pool hub? I tried nemosminer last week on zpool but even if my earning where better than they are now, due to i presume luck or nicehack, my rig crash several times. Awesome miner is at least, for me, stable 24/7.
To summarize is auto switch bad for a small rig?
Thanks,
Wpp
Try MultiPoolMiner without Lyra2rev2 and Lyra2z then you should get fairly accurate profits. |
|
|
|
I apologize for the stupid question, can't understand how a pool works. I use NemosMiner, which seems to be doing something, something switches, something there with all sorts of colorful inscriptions where promise the gold mountains =) But all these promises in 0.001btc/day turned into in 0.0004 for 2 days of work. The rate my client is not displayed in any of the active pools, nevertheless, coins appear in my balance... Is it correct to use such software for this pool? Maybe he uses the wrong ports (17***), address for mining (stratum+tcp://hub.miningpoolhub.com)?
If use a regular client manually and with other ports (20XXX) in this case, I see client on site, but, its speed is 2 times less than in the program itself.
I used this software on different pools and this error (incorrect display) only on MPH and Zpool while all the others do not have problems with speed as and with the calculation of coins. Everything is simple, that shows on the pool, then I'll get, respectively, 2 times less... in my case in 4 times.
p.s. By the way, now me switched with Lyra2rev2 on Scein and my "Hashrate" appeared instantly, exactly like in the client, makes me think about the similarity of the problems at the pool with this algorithm (Lyra2rev2).
NemosMiner is a fork of MultiPoolMiner. Users have reported problems with Lyra2RE2 and Lyra2z. |
|
|
|
It seems that I will have great losses, this pool is terrible there are no instructions, the data should be more clear, for example simplify and put estimated profits, coins in exchange and profit, it should be very easy but I do not know if they do it on purpose to confuse. For example in verge-script pool 427 coins appear? and not confirmed for autoexchange 24 coins? Because so little, why not exchange 200 coins? At this speed it will take weeks to change all the coins  ? Very very very ... confuse If you are confused then just leave the pool to do its work unless you have a more specific question about the information you are looking at. |
|
|
|
@miningpoolhub hello one small question way i can't make excavator mining to your pool noo success to equihash or neoscript i was use this setting {"id":1,"method":"algorithm.add","params":["equihash","stratum+tcp://europe.equihash-hub.miningpoolhub.com:20595","user.worker:pass"]} = noo success or {"id":1,"method":"algorithm.add","params":["equihash","europe.equihash-hub.miningpoolhub.com:20595","user.worker:pass"]} = noo success noo success at address europe.equihash-hub.miningpoolhub.com:12023 EWBF.0.3.4b miner it working but with less speed vs Excavator what work perfectly on nanoo, supernova or enyother pool just on your poll it refuse to conect, soo what can i doo ? i was try run Excavator v.1.3.2.a, v.1.3.3.a, v.1.3.6.a, v.1.3.7.a, v.1.3.8.a thx Update: hmm i found this: MiningPoolHub is blocked be Excavator; try MultiPoolMiner to bypass the block.
Question is WAY was block Excavator & is any chanse to be use in future YES / NO ?!?!? if NO then time to move from this pool thx NiceHash are not 'nice' people contrary to their name. MultiPoolMiner can launch Excavator on it's own. |
|
|
|
Why do I get nothing on some days?
Last 24 Hours 0.00000000
Date Credit, Credit for Auto Exchange
2017-12-15 (UTC) 0.00000000
2017-12-14 (UTC) 1.16466439
2017-12-13 (UTC) 0.31776325
2017-12-12 (UTC) 0.27126464
2017-12-11 (UTC) 0.00000000
2017-12-10 (UTC) 0.65264833
2017-12-09 (UTC) 0.36224270
2017-12-08 (UTC) 0.74535959
2017-12-07 (UTC) 1.37726285
The hashrate is ok
Looks like there is also no payout for today. I think it's time to leave. 3 days of no payments is crap. You're not paid on a timer. This is the page to look at: https://miningpoolhub.com/?page=account&action=balancesZpool uses a timer if you want to try that: http://www.zpool.ca/ |
|
|
|
Hi, may I ask what is going on with Siacoin pool? I was mining around 400 SC a day but a few days ago it radically dropped and for the last four days I have mined 46, 22, 45 and yesterday even only 11 SC. Also the dashboard seems to show invalid net hashrate of 757 TH/s while according to SiaStats.info it currently hovers around 240 TH/s. Might it be an indicator of something not working properly on the pool or is it all just because the recent bug in Siacoin that increased the difficulty so much it now takes much more time to mine a block? If that's the case, will it ever return back to "normal"?
Front end and back end are separate so if the information is out of sync then it's usually still working and the site will then eventually reflect this. |
|
|
|
Well i added the workers for just the equilhash coins.. and it is now showing up.. What a huge waste of time. Not sure i am going to bother adding EVERY coin on the site. I will just use a diff pool or software on this rig i guess. Super weird.
Can't comment on the issue, never experienced it my self; sounds like a pain though. Maybe put both your rigs on the same worker name until the pool op can check the issue. FYI Zpool supports Equihash. |
|
|
|
Why do I get nothing on some days?
Last 24 Hours 0.00000000
Date Credit, Credit for Auto Exchange
2017-12-15 (UTC) 0.00000000
2017-12-14 (UTC) 1.16466439
2017-12-13 (UTC) 0.31776325
2017-12-12 (UTC) 0.27126464
2017-12-11 (UTC) 0.00000000
2017-12-10 (UTC) 0.65264833
2017-12-09 (UTC) 0.36224270
2017-12-08 (UTC) 0.74535959
2017-12-07 (UTC) 1.37726285
The hashrate is ok
Payments don't line up to your hash rate. Take an average. |
|
|
|
So i need to manually add the second rig for every coin that it will be mining? Why was this not required at all for the first rig?
It appears so, adding them in should fix it. That is going to take an extremity long time for every algo/coin on the site. Why is this required just to run 2 rigs? I will move this rig elsewhere You can try contacting the pool op regarding the issue but your workers have clearly failed to add. |
|
|
|
Can you exchange bitcoin back to another coin? I don't see the auto-exchange option down there on that coin's page.
Just trying to get rid of that last BTC balance... would even donate it just want it gone.
Thanks ahead of time!
-M
No, you must have put it in there as you can't mine Bitcoin. Yea, I moved from BTC to something else. So it's stuck unless I transfer more to BTC? -M Yep, basically, if you exchange into BTC then you have to commit to your decision. |
|
|
|
|
Show Posts
