 Show Posts
|
|
Pages: « 1 [2] 3 »
|
|
Hey,
cgminer is reporting that shares are accepted on stratum eu.wemineltc.com , but the website doesn't show the worker kHs. It shows as zero. Are there any issues ?
|
|
|
|
If you get Mhs, then you are not mining litecoin  Sorry, it was a mistype. I'm using guiminer-scrypt, and i'm not quite that stupid. I've updated my bios to the newest revision, and thanks to some of offbyone's settings, getting better hashrates, closer to 500 at unusable mouse party. I honestly think 560 as my afk setting is about the best I'm going to do, though. Not sure how people are nailing 700+ but my temps spike up to 90 pretty fast even at the suggested settings. I'll post/update more but again, anyone else with the same card has settings or suggestions, please fire away. (especially if you have a "I get 500kh/s and can still use that display to game" magical setting.... ) I'm not sure about previous versions of Asus GPU tweak, but the current beta version has ability to draw a manual fan curve which you can use to aggressively lower the temperature. With the case open, these cards run at about 76 C doing 575 kHs. I don't consider gaming while mining. The ATI driver will crash if I even attempt to do that. |
|
|
|
|
I have the same cards. bought it for 299 cad. look through my post history to get what you need. I used reaper, cgminer and guiminer scrypt. on we mine ltc .com or anywhere, I can comfortably now do 575 per card.
|
|
|
|
Ha,- 278 share block was just found in 6 seconds  |
|
|
|
I picked up one N82E16814202030 and it does have proper voltage control and beastly capability. I paid $299 for it. If pushed, it can do 600 kH/s or 580 comfortably. |
|
|
|
Sapphire 7950, http://www.newegg.ca/Product/Product.aspx?Item=N82E16814202030I used to run it reliably at 530 kH/s then bumped it to steady 580kH/s + thread-concurrency 21712 , worksize 256, intensity 20, vectors 1. @core 1100, @memory 1375, power target +10% With Asus gpu tweak, I manually configured the gpu fan curve to keep the temps right and a bit cooler than default. I also had an XFX 7850, but it was barely crossing 350kH/s. |
|
|
|
|
I like it as well. Being a member since the first block feels cool too and its nice to see the pool grow
|
|
|
|
Is anyone working on this? I'm interested and bored lately...
I could be wrong, but guiminer already has a File menu -> add new cgminer/reaper tab with all the inputs from OP's request. This is according to what I saw a few days ago |
|
|
|
|
I'm donating. +1 for the good side.
|
|
|
|
|
@joerri
I joined when difficulty was 204, and the first block took the longest time, so you didn't lose much there. now, your numbers when extrapolated over mine, show that if you joined at around my time and your error/stale rate is similar to mine ( less than 1% ), you would have had about 8.4 ltc credited. mind you, on average the credit is steady in pplns, but past performance is not a direct predictor of future. I can tell that miners tend to lose a bit on long rounds, and its nice to get a couple shorter round bursts to even it out.
|
|
|
|
Hello people, we rewrote a huge part of the pool code, and we just upgrade it. It should work even better now, please let us know if you come across any issues! All miners should report correct in 5mins from now  Could you please respond to the issue of getting very low payouts ? I'm new to PPLNS but not even making ONE LTC with over 12k shares seems wrong. Is the calculation messed up ? Whats going on ? hey, what is your threshold for automatic payout and transaction history say? also, on average what is your khs and do you hop in and out of the pool? ill try to see if I can help you make sense of the numbers :-) |
|
|
|
|
I would. only pay attention to how many shares you are submitting per interval of time. the payout is calculated based on pplns and if and when the blocks are found, I got paid for each of them, according to how many shares my workers contributed.
I honestly hope that this pool takes off because the stale rate and fees % is awesome. for that purpose I leave part of my workers there, but also keep half on another faster pool where I get more ltc, but awful stales and fee.
guys, I've been with you since the the first block. keep the pool running well and get more users on it!
|
|
|
|
its going back up. it dipped really low for all reported miners. as if pplns wasn't random enough  |
|
|
|
One thing I just learned tonight is you need to set powertune to +20% to in effect turn it off. Otherwise it'll drop your clock speed on and off to reduce power usage. Just a tip.
Does that run stable for you with what output ? |
|
|
|
13.1 Beta or did you mean the 13.3 Beta?
13.1 is an official release. The settings you mentioned do not work on my current config. Anything above the Low Settings (sans just intensity for CG, don't work).
yes, 13.3 . edited Also, I modified core and memory setting and settled on 925 / 5000. I get higher Khs output with OC, but share output is minimally higher over 1 hour test span making it not worth it. |
|
|
|
|
I've been running sapphire 7950. tested share output with variety of settings and the ones that seem to perform well and stable are: 13.3 beta driver, gui miner 7950 high setting - cgminer program. It steadily runs at 530 Khs
I can get it to run higher, but the drivers crash...recover and overall lose share output
|
|
|
|
Finally. Now lets find 5 more to make up for how much I've lost.
Yeah, no joke. I’m back on coinotron. What's the point of 0% fees when the payout after 24 hours happens to be 0... We may also end up with a streak of luck and you will miss out. That is the fun of it. I agree, but still. I'm on a meaasly .333 LTC in 24 Hrs of work. I'm really looking forward to getting 10 times that at least |
|
|
|
|
I've had three workers pointed at you guys for some time. I've switched over from coinotron hoping that I won't see so much down time and stales as I've seen in last few days. I did the math how long it should should take for a block with our Mhs rate and it comes out to about 3.15 hours. I'm wondering just like the others do, about the possibility or cause of such delay.
|
|
|
|
What config file?
i connect direct using no config files ( i havent started miner yet )
mining_proxy.py -o coinotron.com -p 3333 -cu "riku2015.btc" -cp MYPASSWORD
Meaning i override any config by this options:
-cu CUSTOM_USER, --custom-user CUSTOM_USER
Use this username for submitting shares
-cp CUSTOM_PASSWORD, --custom-password CUSTOM_PASSWORD
Use this password for submitting shares
I'm at work atm, but whee I get back ill post how I got my proxy configured. its running well, . I think its a coinotron issue |
|
|
|
|
