I will take a small break ... there is something coming ^^ that needs my attention more then ... this batch 3. stay tuned. [BATCH 3] = HALTED!! ? pieces = ? packages Step. 1 [done]: Negotiate pricing & shipping with Gridseed or Reseller Step. 2 [done]: Opening reservation Step. 3 [...]: Open payment Step. 4 [...]: Initiate order with bank wire payment Step. 5 [...]: Shipping Step. 6 [...]: Dispatching
Payment to reseller will be done as soon as BATCH 2 has been confirmed as shipped. Unconfirmed reservations of BATCH 2 are moved to BATCH 3. nickname | Packet | eMail | Country | Payment | Stat ------------------------+----------+-------+---------+---------+------+ ------------------------+----------+-------+---------+---------+------+ | RESERVED | 0 / ? | +----------+----------+ ? means you haven't supplied that information to me ... please PM.
|
|
|
also my Image is open for SSH access, just use pi/raspberry as credentials ...
|
|
|
Update:[BATCH 2] First packages 200 miners arrived![BATCH 2] = CLOSED!! 250+ pieces = 25+ packages Step. 1 [done]: Negotiate pricing & shipping with Gridseed or Reseller Step. 2 [done]: Opening reservation Step. 3 [done]: Payment is open now! Step. 4 [done]: Payed order with bank wire payment (17.03.2014 08:25 MEZ) Step. 5 [done]: Shipping, estimated: 21.03.2014, 1.package arrived 24.03.2014 ... Step. 6 [95%]: Dispatching, estimated: 27.03.2014
Everyone should have a PM for the Tracking number ... by now! [BATCH 3] Postponed.
|
|
|
Arenīt you a clerer one. No, I am just reading this topic properly This is getting OT, but you are clearly unable to see the sarcasm in my last reply. Let me explain it to you a bit. I asked for miners only and large amount of them. Shipping depends largely on scale and location. None of that information in in OP. Do you get it now? I answered you by PM ... yesterday and a few days ago ... I don't get your point ... Hi,
I'm running a group buy ... I'm not doing offers ... I try to get lower prices for bulk orders.
Sry.
Will have to pay VAT anyway.
For Switzerland.
Please come back to me on saturday, I will know more then.
I got a lot to do right now with Batch 2.
Best regards
Cedric
|
|
|
Where is the cat?
probably sent out in one of the packages that where shipped today ...
|
|
|
Update:[BATCH 2] Everything arrived, to much to count ... I will see what is left when everything is shipped...![BATCH 2] = CLOSED!! 250+ pieces = 25+ packages Step. 1 [done]: Negotiate pricing & shipping with Gridseed or Reseller Step. 2 [done]: Opening reservation Step. 3 [done]: Payment is open now! Step. 4 [done]: Payed order with bank wire payment (17.03.2014 08:25 MEZ) Step. 5 [done]: Shipping, estimated: 21.03.2014, 1.package arrived 24.03.2014 ... & 26.03.2014 Step. 6 [40%]: Dispatching, estimated: 27.03.2014 .... started 26.03.2014 ...ongoing, targeted to be finished 29.03.2014 [BATCH 3] Will have new prices, trying to get out payment details ... will wait till Batch 2 is finished dispatching ... sry .. it's a one man show. as a side note, my dentist fucked up a teeth ... on friday and since then suffering horrible pain ... how ever ... the show must go on!
|
|
|
...
You probably plugged in 20 miners on the PI, this is a problem with CGMiner. When you click on the UPDATE CONTROLA link, it will upgrade your firmware to version 1.2.0, which has BFGMiner for scrypt hashing This solves the Cgminer problem. After this, your pi will be mining at a solid 7200mhs (and this time, it will also reflect on the pool)
I'm using for my 20 miner rig on one rasbian a clean weezy img + cgminer .... this works stable and reports 7.1 gh at the pool ... is there a cgminer problem? for more then 10 miners? Here a 4gb Hashra image ... be sure to change pools before mining ... it's set to my setup right now ... as I used to test it ... will try it out with 20 miners in a few minutes ... Hashra 4 gb imageyes CGMiner is not stable with the GD5 chips, It causes them to "zombie out" after a while. When 20 miners are plugged in to 1 CGMiner instance, only half of them are actually hashing properly, while still showing maximum local hashrate, hence the much lower hashrate on the pools. BFGMiner (installed on CONTROLA 1.2.0) works perfectly with 20 miners (or more? haven't tried more). I would love to see the performance of CONTROLA with 30 - 40 miners on 1 PI...anyone want to try it? trying out with more then ...
|
|
|
There are various tips on reducing disk access for flash drives, also useful is to use a bigger flash drive than you 'need'. I mostly (Sandisk is the exception) have success if I keep the flash drives less than 1/2 full. This drastically reduces the wear on the flash memory. Cards are cheap, downtime is not. It seems 4GB is needed so I'll be using an 8GB for starters. There are no problems writing an image to a larger drive than needed. I wouldn't mind buying an image on SD if it's a pain to upload etc. About 10 euros for software that just works seems a bargain to me.
https://bitcointalk.org/index.php?topic=482352.msg5871402#msg5871402I will now write an Image to every disk ... so it should be plug and play ... however it seems ... make sure you all have a power cable for the raspberry ... it's micro usb to usb ... ( LINK)
|
|
|
...
You probably plugged in 20 miners on the PI, this is a problem with CGMiner. When you click on the UPDATE CONTROLA link, it will upgrade your firmware to version 1.2.0, which has BFGMiner for scrypt hashing This solves the Cgminer problem. After this, your pi will be mining at a solid 7200mhs (and this time, it will also reflect on the pool)
I'm using for my 20 miner rig on one rasbian a clean weezy img + cgminer .... this works stable and reports 7.1 gh at the pool ... is there a cgminer problem? for more then 10 miners? Here a 4gb Hashra image ... be sure to change pools before mining ... it's set to my setup right now ... as I used to test it ... will try it out with 20 miners in a few minutes ... Hashra 4 gb image
|
|
|
...
You probably plugged in 20 miners on the PI, this is a problem with CGMiner. When you click on the UPDATE CONTROLA link, it will upgrade your firmware to version 1.2.0, which has BFGMiner for scrypt hashing This solves the Cgminer problem. After this, your pi will be mining at a solid 7200mhs (and this time, it will also reflect on the pool)
I'm using for my 20 miner rig on one rasbian a clean weezy img + cgminer .... this works stable and reports 7.1 gh at the pool ... is there a cgminer problem? for more then 10 miners?
|
|
|
side view on the rack ... 20 gridseeds, 1 raspberry, 2 usb hubs ... everything powered by the atx psu ..
|
|
|
side view on the rack ... 20 gridseeds, 1 raspberry, 2 usb hubs ... everything powered by the atx psu ..
|
|
|
Will try to do the image for you guys ...
|
|
|
What the.... Holy crap. Is that realy for batch 2? No mispelling?
yes, it is for batch 2 .. because those wiibox controllers are not useful, I removed them from the order and bought raspberrys ... for everyone, if someone still want's some original controllers ^^ I've some spare ones
|
|
|
nice - did you make these? a friend of mine made them all I got a box full of them ^^ and he intends to do more ... if someone is interested ... in the EU + CH area ...
|
|
|
Update:[BATCH 2] Controllers arrived today ^^ :-) Rasberrys
|
|
|
Will be available to purchase for Batch 3 customers ...
|
|
|
Update:
[BATCH 1] All DHL packages where delivered!!! Batch 1, is completed. Thx for participating.
[BATCH 2] All Tracking number received for Batch 2, estimated dispatching to group buyers next week.
[BATCH 3] Will send out mail for further informations this weekend, stay tuned. Process will be faster, for Batch 3.
|
|
|
|