Is worldwide shipment included in BTC1,45 ?
Correct, UPS Delivery
|
|
|
Nice to see you back with GB 8 Sushi and matching the price of Bitmain As always the service you provide is the best around - Good luck with new year and new sales
|
|
|
Problems with Stratum server getting dead connections on all my miners and tried ping server and showing as down.
|
|
|
Has bitmain got new website ? I cant seem to load his old page. Google then redirects me to Bitmain Asia ? I am still being redirect to: http://bitmaintech-asia.com/His old page was loading slow, but is now working normal on my end. The website you are being redirected too, I am unsure who/what that is. Maybe a reseller? The prices don't match the original Bitmaintech.com website either so I would use some caution with that site, unless somebody can vouch for it. Yeah might just be very busy with traffic, strange that google redirected me to that site. I have only bought from Sushi or Bitmain direct website Cheers
|
|
|
Working for me again logged in cheers
|
|
|
Has bitmain got new website ? I cant seem to load his old page. Google then redirects me to Bitmain Asia ? I am still being redirect to: http://bitmaintech-asia.com/
|
|
|
Ok guys I have asked this question before but got no response so I decided to show you what I mean: Any explanation from the Antminer gurus why my NOT OVERCLOCKED Antminer hits these speeds? I am not saying I am not happy but, Is this going to cause a problem to my miner? Please let me know. Thank you Look at the average rather than the current speed and it shows to be running at good speed. It will go up and down due to pool or even internet connection but as long as you are happy with the speeds and there is no x's on the chips then you are all good. Which chip sped are you currently on ? Just to double check 375 is default
|
|
|
Guys sorry, stupid question here: How can I post images? I wanna post screenshots of my miner. Thanks When making a post its the icon 2nd from the left above the emos little picture then you input the url of the picture So I have to upload the pic on another server and just use the link? Yeah host like imgur, photobucket anything really
|
|
|
Guys sorry, stupid question here: How can I post images? I wanna post screenshots of my miner. Thanks When making a post its the icon 2nd from the left above the emos little picture then you input the url of the picture
|
|
|
Just reading all these posts made by Kesh and like really why has the user not been booted off this place yet constant spam about his mistakes. This would never stand in a court of law - Kesh face it you have zero case now please leave us all alone
|
|
|
Hello everyone AntMiner S1 and U1 are in stock, orders are accepted from Jan.30, 2014. The shipping of this batch will be started on Feb 8th, 2014, right after the Chinese New Year. Those customers who place the order first will receive the miners first. I made payment on time but my account says payment expired. Order ID: 00120140130072553392cfb1JFq2067F Transaction ID: ec75d17c96d99ee9300085e863ed5d63810e5d9b75dda510a7598a2f9d0aa270 Bitmain website was offline all last night for some reason, I would email and PM Bitmain with order ID and TX so he can update the order. Had this issue with my past order and since has been update, Hope this helps cheers Their website works fine on my end Yeah website came back online this morning UK time, Some at the Data Centre in china switch of the power before they left for new year I wonder ahaha
|
|
|
Hello everyone AntMiner S1 and U1 are in stock, orders are accepted from Jan.30, 2014. The shipping of this batch will be started on Feb 8th, 2014, right after the Chinese New Year. Those customers who place the order first will receive the miners first. I made payment on time but my account says payment expired. Order ID: 00120140130072553392cfb1JFq2067F Transaction ID: ec75d17c96d99ee9300085e863ed5d63810e5d9b75dda510a7598a2f9d0aa270 Bitmain website was offline all last night for some reason, I would email and PM Bitmain with order ID and TX so he can update the order. Had this issue with my past order and since has been update, Hope this helps cheers
|
|
|
wonderful! when will they be for sale? Based on timelines, mid-late feb for my first batch of extras that I dont think Ill need. Looking good, if you can add me to a list if you have one when these come available, Cheers
|
|
|
Great news on the chips Friedcat, would be looking to join the team as a reseller for UK and other places.
Good to see you looking publicly for designers and company's to take on board as I'm sure people on here could come up with some pretty good designs.
That fit well into racks or stack plus PSU built in so just a 3 pin kettle would be the ideal future of bitcoin hardware delivery.
Plug and play would make the big sales - If you can get suppliers for each of the stages you will be onto a winner.
Keep us updated as always Friedcat
CroverNo
|
|
|
Nice looking setup, here is a question that has been bothering me for a while, Why pay £239 for a 1350W Psu when you can buy a budget 600w PSU for under £20 Delivered ?
I run all my ants blades with there own PSU. I take it I must be mad or something, fair enough it takes a bit of room but will it not be cheaper as the PSU will only be pulling what it needs ?
I have 5 ants in total so that's 10 600w PSU's.
Going to get a multi meter to measure what it is pulling all my miners are running between 205 and 210 Gh/s
Cheers
You don't want to skimp on the PSUs! Cheap PSUs will have very poor voltage regulation and ripple suppression, and will not be able to put out the power they say they can without either blowing and taking everything connected out, or if you're lucky just powering down. Please spend 30 minutes reading the following for your own safety (potential fir hazards) and for your equipments health. http://www.jonnyguru.com/modules.php?name=NDReviews&op=Story&reid=324http://www.jonnyguru.com/modules.php?name=NDReviews&op=Story&reid=154http://www.jonnyguru.com/modules.php?name=NDReviews&op=Story&reid=335http://www.jonnyguru.com/modules.php?name=NDReviews&op=Story&reid=123so you have 10 600w PSU's so that lot will be pulling 6000w Max
i have 1 1500w running 4 Ant miners hmmm i would who is going to win in the long run lol
That is not how switching power supplies function. Devices will only draw what they need. Using a 600w power supply with a 100w device does not mean you're pulling 600w at the wall. You'd be pulling around 125w at the wall with this example. Well, I have been running my first antminer since november/dec and not 1 power outage and still going strong. The brand is Antec with 30A on the rail so my math dose me right that is pretty good if they are only pulling 125w each. I will know exact figure tonight when the multi gets installed. Fair enough firehazard it's in a cooled environment max temp 8c cable from the extension is warm and has thermal cutout built in so the cables don't melt. I am going to run a second extension from power source 2 as currently everything comes from the 1 plug industrial wire and plug in use. With also laptop server connected and 1x network switch. Thanks for the links will give them a read over Edit: Each of my PSU have Dual PCIE 6pin and 1x 8Pin I have connected a few also with the 8 pin to help spread the load.
|
|
|
Nice looking setup, here is a question that has been bothering me for a while, Why pay £239 for a 1350W Psu when you can buy a budget 600w PSU for under £20 Delivered ? I run all my ants blades with there own PSU. I take it I must be mad or something, fair enough it takes a bit of room but will it not be cheaper as the PSU will only be pulling what it needs ? I have 5 ants in total so that's 10 600w PSU's. Going to get a multi meter to measure what it is pulling all my miners are running between 205 and 210 Gh/s Cheers
|
|
|
is 500 U1s a good deal at 22btc?
what are these sold for individually?
seems only 1 coupon per order..
also wrt xxxxxxx's - both rigs are between 175 & 185. i found adding a fan on the back blowing in adds about 5-10 Gh (not OC'd)
thx all
Correct me if I am wrong but the price for the 500 Ants needs to be updated still so please hold off as the price has now been updated since the 2.2BTC Ant S1 Also with the wait for next dispatch the 8th. I hope bitmain opens an online customer service based chat or ticket support would be a great way to take the company forward as the have the product,price and delivery they just need the customer service to match then they will be the best all round ever Bitcoin mining company I see many order already flooding into the Bitmain wallet....
|
|
|
Thanks Crover, just ordered 3 more. No problem I'm sure Bitmain will make new thread or update first post and update message. Hopefully we see a new product come out... maybe 20/28nm chip ? Bitmain has us all on edge Cheers
|
|
|
Website is now accepting new orders with the new price 1.45BTC I also got my coupons thanks Bitmain Will order near the date as I think you might update price come 8th Feb Cheers
|
|
|
|