|
I offer you 0.77BTC+shipping. I am also in EU. (NL)
|
|
|
|
|
I'm in NL, how much for one of the hubs?
|
|
|
|
I'm also in NL, and would be interested in the the 390/480Gh system, but I am not exactly flush in finances. If your deal to sell them all in one batch falls through, please contact me, maybe we can work something out  Thanks! |
|
|
|
|
Also interested in the fans!
|
|
|
|
How much is shipping to the Netherlands for the gridseeds?
Maybe we could ship some together? I am in the Netherlands as well and would like to buy 2-4, so we could save on shipping and clearing costs. BTW, Do the modded units still work in dual mode? |
|
|
|
|
I'll open the bidding @ 0.1BTC + shipping
|
|
|
|
|
vircurex is fucked so i assume you will be using another site?
|
|
|
|
Hey I just got the following error when trying to connect to coinex.pw with chrome: "Cannot connect to the real coinex.pw Something is currently interfering with your secure connection to coinex.pw. Try to reload this page in a few minutes or after switching to a new network. If you have recently connected to a new Wi-Fi network, finish logging in before reloading. If you were to visit coinex.pw right now, you might share private information with an attacker. To protect your privacy, Chrome will not load the page until it can establish a secure connection to the real coinex.pw." What's up with this?  |
|
|
|
Hierbij een bod van €200 gezien de ROI over 100 dagen 0.0 is als de diff (zoals nu) elke keer ~20% stijgt.... (en ze onbetrouwbaar zijn omdat je nu al een blade hebt dat kaduuk is)
Met vriendelijke groet
adriaan
Dank je, maar ik heb al een bod van 300€ binnen. Mocht dit niet doorgaan en er geen hogere biedingen zijn dan neem ik contact op. En er zittten dus 2 complete extra modules bij. (is trouwens niet onbetrouwbaarheid, maar schade door onvoorzichtig verzenden fabrikant) |
|
|
|
I have a good-as new BTmine 220gh miner that I need to get rid of because I live in a small appartment and it's just too big for me. It runs stable at 1500Mhz. It has 10 chips that sometimes don't work, but I have 2 20-chip replacement boards, I can replace it for you, but it would be better to do that after moving the unit I think. You get the 2nd 20-chip board (28 ghs!) for free. I live in Leiden, the Netherlands, and would prefer local pickup, but am willing to ship. It would be nice to get 300-450€ for it, but I am open to any offers. If anyone wants to see photo's please let me know, and I will take some, but you can see my name in the original thread with the orders, my name is chris and I ordered on 08/01/2014 and paid with btc: https://bitcointalk.org/index.php?topic=379819.0Any questions or offers please PM me & post here. Thanks for your time & attention! |
|
|
|
|
Ik open met een bieding van 85€, ivm het uitkomen van de nieuwe gridseed blades.
|
|
|
|
|
just moved 15 UNO from coinex to cryptsy. Hope my withdrawal goes through. I have 1+ BTC of alts over there. Where can you see if you withdrawal is stuck in a queue?
|
|
|
|
|
230+ Gh/s Avalon 2e generatie standalone Bitcoin/altcoin miner van het merk BTMine + extras
Deze bitcoin miner draait nu op ongeveer 215 Gh, omdat een van de 16 mining boards moet vervangen worden maar ik heb de onderdelen al in huis, wil het ook wel voor je doen maar is beter om te vervangen als je hem niet meer gaat verplaatsen. Ook heb ik nog een extra tweede 20-chip board (2 miners) mochten er later nog meer kapot gaan, en een reserve netwerk module, deze krijg je er allebei (alledrie dus eigenlijk) gratis bij. Deze mining boards los kosten per stuk alleen al 200€+. Alle chips op de kapotte module zijn nog goed.
Inclusief 2*600W PSU zodat de voeding verdeelt wordt over twee voedingen en dus minder snel slijt!
Heb het apparaat 2 maanden geleden gekocht bij de fabrikant voor 2400$ + importheffingen en BTW. Nog 30 dagen garantie van de fabrikant. Mocht je er later problemen mee ondervinden (in het algemeen zijn deze modellen erg betrouwbaar) dan help ik je graag.
Stroomverbruik: ~650-950W (bij overclocking)
Snelheid: 220-240 Gh
Wifi - en ethernet (bedraad netwerk) verbinding.
Geen PC nodig!
Gewicht: ~15kg
Inclusief alle kabels,
Zou er graag 350-750€ voor krijgen, maar alle biedingen vanaf 325€ worden serieus genomen.
Doe een mooi bod en hij is van jou, moet ervan af ivm ruimtegebrek. Ventilatoren maken wel wat geluid maar koelen goed en kunnen gemakkelijk en goedkoop worden vervangen door stillere exemplaren als dit nodig is. Er zijn ook waterkoelingskits verkrijgbaar voor dit model.
I.v.m. gewicht liefst ophalen maar voor een kleine meerprijs wil ik hem wel verzenden.
Moet weg i.v.m.ruimtegebrek!
Biedingen in BTC zijn uiteraard ook welkom!!
Liefst ophalen in Leiden.
Heb je vragen? Post hier of stuur me een bericht.
[edit] prijs aangepast
|
|
|
|
|
hey I can't get my hashing board loose from the module heatsink how have you guys managed to get them loose? And do I need thermal paste to reattach the new one? It's the third one in the row, so do I need to take the 4th off first? they just seem to be really well stuck to the heatsink...
Any help much appreciated!!
|
|
|
|
Oh and one more question:
so board 5 is dead. could somebody point out in a photo which board i need to replace?
I have watercooling kit on one unit. Its nice but noth worth it. You will find broken blade by touching the chips with finger, when it wont hurt its the broken unit. ok thx but is it on the 8-board unit that is on the side of the power control board and the psu's or the one that's all the way down on the bottom of the case? plus i suppose i need to unscrew the boards before i can check or can you take the bottom out? thx for your advice |
|
|
|
Oh and one more question: [STATS0] =>
(
[STATS] => 0
[ID] => AVA0
[Elapsed] => 3738
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[baud] => 115200
[miner_count] => 16
[asic_count] => 10
[timeout] => 8
[frequency] => 1500
[fan1] => 0
[fan2] => 3120
[fan3] => 3120
[temp1] => 27
[temp2] => -1
[temp3] => -1
[temp_max] => 27
[Device Hardware%] => 4.4259
[no_matching_work] => 2947
[match_work_count1] => 12793
[match_work_count2] => 12505
[match_work_count3] => 12688
[match_work_count4] => 12564
[match_work_count5] => 8
[match_work_count6] => 12900
[match_work_count7] => 12523
[match_work_count8] => 12740
[match_work_count9] => 12754
[match_work_count10] => 12470
[match_work_count11] => 12650
[match_work_count12] => 13022
[match_work_count13] => 12458
[match_work_count14] => 12469
[match_work_count15] => 12683
[match_work_count16] => 12715
[Controller Version] => 2013110865
[Avalon Chip] => 55
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 1093184 0 so board 5 is dead. could somebody point out in a photo which board i need to replace? |
|
|
|
So, has anyone with these btmine units actually gone up to 1600 MHz? I saw it was mentioned earlier, but I'm not sure it wasn't just suppostion, especially with other similar clones only running 1250 or 1300 MHz. Right now I'm happy with 1500 MHz running solid for 2 days straight. No high error rates or temps. But, if I'm throwing perfectly usable cycles on the floor, well, I'd rather not - comes from my SETI/BOINC/Prime days...  1600 OC stable but HW rate goes up to 10% and 1028w from wall.       1500 OC is the sweet spot 961w from wall. Under 4% HW error and hashrate stays around 230GH/s    I think it's very important to have good power supply. You will also save easy 100w electricity with it. 2x Stock PSU @1400 = 946w from wall. @210 GH/s -edit- Stock PSU settles to 999w after 1 hour2x Stock PSU @1500 = 1060w from wall and they will blow out at some point dont wanna try. 2x 1kw PSU @1500 = 961w from wall. @230 GH/s 2x 1kw PSU @1600 = 1028w from wall. @+230 GH/s 10% HW errors not worth it. For those who dont know PSU will perform better when not tortured full. So you will save 100-150w Electricity by getting good PSUs NEXT coming from Sikke: Watercooling 101 (i have watercooled CPUs from 1999. i put AMD Duron 700 --> 900Mhz)  That did the trick. But isnt this dangerous ? No overheat protection ? I have temp1 at 21° where does that come from as i have only one sensor...
This is for you. You can get the unit very silent  simple to install. Temp sensor still works as safety backup for overheating. 70c @ cgminer will shut down. http://www.aliexpress.com/item/water-cooling-kits-for-Avalon-II-BTC-miner-BTC-38Gh-s-miner-BTC-mining-machine-BTC/1562933976.htmlhttp://www.aliexpress.com/item/water-cooling-kits-for-Avalon-II-BTC-miner-BTC-200Gh-s-miner-BTC-mining-machine-BTC/1578317468.htmlHas anyone tried to buy and install the watercooling kit? Thx 4 the temp sensor tip: my miner was stopping the fans after replacing the tp-link module.... BTW: Anyone want to buy a fully functioning ava2 with one extra spare hashing board? I'm in the Netherlands |
|
|
|
|
Would you consider 0.8BTC if so please PM me
|
|
|
|
|
If anyone wants to sell their micro (EU) please PM me.
|
|
|
|
|
Show Posts
