280x memory Elpida, editing bios, 1100@1500 7970 memory Hynix editing bios, 1100@1500 how to editing bios saphire 280x dual x, 1100/1500 1.225v ~480 h/s
|
|
|
How to mine XMR with claymore AMD GPU miner
|
|
|
Anyone got their 280x up at above 245H/s yet? Mine's at 240h/s at 1200/1700 1.2vddc
1200/1500 than crash what i was missed out with my rig What's your voltage and which 280x do you have? saphire dual x r9 280x
|
|
|
Anyone got their 280x up at above 245H/s yet? Mine's at 240h/s at 1200/1700 1.2vddc
1200/1500 than crash what i was missed out with my rig
|
|
|
criticisms and suggestions to the developer is a natural thing, but please do not outrageous Dont let Claymore became discouraged do not let the same thing happen again at the long time a go developers who are able and willing to share the software is lost and no longer willing to distribute software
do not ever think about their profits, just think how much profit we earn
perhaps still remember with Wolfo
I am so confused with the calculation of profit for their fees from the service providers, software (miner), pools and ending in exchange when the goal is BTC
it is easier for a beginner like me to use nicehash service to calculate profits
please help me to calculate
miner illustration I have a top speed of 200 s / h
dev fee, pools fee and when PO fee, exchange fee
How much I earn BTC per day
and how to ZEC solo mining
|
|
|
Dual-X R9 280X 3G D5
win7 4 Gb RAM, 16 Gb virtual RAM radeon software ver 16.9.2 zecminerx64.exe -zpool ssl suprnova -i 8 hashrate avg 200 h/s hashrate do not match between pools and my rig and always : share rejected 5
is this normal ?
yes http://imgur.com/a/OOubgshare rejected is always same value what that means
|
|
|
Dual-X R9 280X 3G D5
win7 4 Gb RAM, 16 Gb virtual RAM radeon software ver 16.9.2 zecminerx64.exe -zpool ssl suprnova -i 8 hashrate avg 200 h/s hashrate do not match between pools and my rig and always : share rejected 5
is this normal ?
|
|
|
I have rig with 2 GPU R280
this running well, but after an hour my rig shutdown for it self
i didn't change any configuration, just set miner to run dagger only
thanks for advise
|
|
|
Need some help, using nichash miner 1.3, everything working well except ethereum getting error like SS thanks
|
|
|
anyone compile it on windows
|
|
|
whats the "queue" means? I0925 23:41:34.460357 4184 chain_manager.go:671] imported 0 block(s) (1 queued 0 ignored) including 0 txs in 7.0004ms. #110475 [b557cbbc / b557cbbc] I0925 23:41:34.808377 4184 chain_manager.go:671] imported 0 block(s) (1 queued 0 ignored) including 0 txs in 7.0004ms. #110475 [b557cbbc / b557cbbc] I0925 23:41:34.921384 4184 chain_manager.go:671] imported 0 block(s) (1 queued 0 ignored) including 0 txs in 5.0003ms. #110475 [b557cbbc / b557cbbc] I0925 23:41:35.081393 4184 chain_manager.go:671] imported 0 block(s) (1 queued 0 ignored) including 0 txs in 4.0002ms. #110475 [b557cbbc / b557cbbc] I0925 23:41:35.168398 4184 chain_manager.go:671] imported 0 block(s) (1 queued 0 ignored) including 0 txs in 7.0004ms. #110475 [b557cbbc / b557cbbc] I0925 23:41:36.896497 4184 chain_manager.go:671] imported 0 block(s) (1 queued 0 ignored) including 0 txs in 7.0004ms. #110475 [b557cbbc / b557cbbc] I0925 23:41:38.670598 4184 chain_manager.go:671] imported 1 block(s) (0 queued 0 ignored) including 0 txs in 94.0054ms. #110475 [b557cbbc / b557cbbc] I0925 23:41:38.673598 4184 worker.go:542] commit new work on block 110476 with 0 txs & 1 uncles. Took 2.0001ms I0925 23:41:39.994674 4184 chain_manager.go:671] imported 0 block(s) (1 queued 0 ignored) including 0 txs in 5.0002ms. #110476 [1193fa12 / 1193fa12] I0925 23:41:40.163684 4184 chain_manager.go:671] imported 0 block(s) (1 queued 0 ignored) including 0 txs in 7.0004ms. #110476 [1193fa12 / 1193fa12] I0925 23:41:40.278690 4184 chain_manager.go:671] imported 0 block(s) (1 queued 0 ignored) including 0 txs in 7.0004ms. #110476 [1193fa12 / 1193fa12] I0925 23:41:40.963729 4184 chain_manager.go:671] imported 0 block(s) (1 queued 0 ignored) including 0 txs in 7.0004ms. #110476 [1193fa12 / 1193fa12] I0925 23:41:42.570821 4184 chain_manager.go:671] imported 1 block(s) (0 queued 1 ignored) including 0 txs in 107.0061ms. #110476 [b557cbbc / 1193fa12]
|
|
|
different with v0.3 this took a long time to sync i hope i dont missed my old coin on my 0.3 wallet
|
|
|
There is something wrong last day send tx smoothly today send tx 49 exp from wallet "success" but not received on polo how to check my tx history from wallet Check your balance. Send again if it is still there. If not, check on POL if you see the pending deposit. -tb- zero balance after send a tx and there is no pending deposit I was ever do this and its well done if there is any eth wallet issue again
|
|
|
There is something wrong last day send tx smoothly today send tx 49 exp from wallet "success" but not received on polo how to check my tx history from wallet
|
|
|
how to write bat command to execute multi executable command file
ex: (this not work)
echo off gexp attach admin.peers exp.getBalance(exp.coinbase)
when run this bat file we can see 3 info appear on console with one click
Not possible. - the first command (called from command prompt or terminal) attaches to a running gexp console there you can enter any gexp commands, but your bat is currently in the first gexp call - after returning from gexp console (type exit) you are back in the (win/linux) terminal. - if now "admin.peers" is called, it is an unknown command for the win/linux command line, the same for your last command. You cannot execute gexp commands from the terminal directly (except "gexp account new") The only way (I know) to execute commands in the gexp console by batch is using the RPC API (see https://github.com/ethereum/wiki/wiki/JSON-RPC) Solution found: With the exec parameter you can call a javascript command from bat file, e.g.: gexp --exec "exp.blockNumber" attach You're the one its work gexp --exec "admin.peers" attach gexp --exec "web3.fromWei(exp.getBalance(exp.coinbase))" attach pause
|
|
|
If it doesn't work, then 'gexp' is probably not on the %PATH% ... so find 'gexp' location, and CD there first. Similiar to this: C: cd C:\ProgramData\chocolatey\lib\geth-stable\tools geth account new
(This example is from my geth (go-ethereum) installation, and 'geth' lives in "C:\ProgramData\chocolatey\lib\geth-stable\tools") EDIT: Just looked into Expanse - you already have exactly that already :-) --> "Setup_Step_2_new_account.bat" - but see my suggestion below. It will take me some time to get used to Ethereum/Expanse's commands but I'll get there. It's a totally new world in crypto. The command line has millions of advantages. One hint, to make it all "clickable" again ... When you notice that you type the same command line command over and over again ... just make a .bat file (.bat = a 'batch' file of commands that shall be executed). In my above example, if creating a new account were the thing that you want to do, just create (with text editor, e.g. notepad, or better notepad++) a file with this content: and save it as and ... double-click it. Great! Thanks for this useful advice. Creating bat files with the commands listed above makes my life easier by not having to type the same command over and over again. I'm going to keep studying Ethereum/Expanse's commands until I really get the hang of it. In the meantime, I'll just create bat files for automation. how to write bat command to execute multi executable command file ex: (this not work) echo off gexp attach admin.peers exp.getBalance(exp.coinbase) when run this bat file we can see 3 info appear on console with one click
|
|
|
How to lower the intensity of the GPU? My card usually goes up to 86, 87 degrees C, which is too much. Which command to put in the .bat file?
I've tried this,
setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 70 setx GPU_MAX_HEAP_SIZE 70
but it has no effect on the temp.
Ethminer does not support flags for changing gpu clock speed or voltage, does not support yet. As Xdragon said u should lower your gpu clock and gpu voltage. The best you can do is find the lowest stable voltage for the current clock speed and see if it helps. If not, lower your clocks and keep looking for lowest stable voltage again. But first of all give your card more airflow. ethminer can be change on GPU clock/mem clock /intensity there are a simple wayr280 31 Mhs 77 degrees c without overclock only get 26 Mhs but no one answer my question
|
|
|
Please help start expanse.bat >> wallet running start miner.bat >> miner running start attach.bat >> check admin.peers ok but after a while start attach.bat >> check admin.peers null it should be restarting wallet whats wrong I have already open my firewall etc
|
|
|
Something wrong my balance gone with the wind I was checked last night, there is some exp balance on my wallet but now it was reset or something wrong chain then. this coin is not working
The coin works fine I dont think so I was try my setting than pointing to suprnova and works, i still have a few balance on pool than try go to solo, all is fine but just missing some balance on my wallet this ever happen just like eth/shf when they upgrade wallet
|
|
|
|