Please send the log as my only thought is that it is happening when there are more than 1 type of GPU in a system.
For example I have 1 mixed system that i setup today with a R9 270x and a R7 360 and each mines a different algo when the dev fee kicks in only one of the 2 is switching to the dev fee which is still fine by me.
As to the donation and how it should be working
After the first 3 Hrs it should switch to the dev address for 12 Min then switch back your address and reset the timer for the next Dev mining for another 12 Hrs.
Just sent over the log. I do have 1 1080 ti and one 1070. Both of mine ended up switching though. Perhaps because I cycled the miner mid change? Thanks for explaining how the schedule works. No problem, I will look into the logs tonight and see what I can find. |
|
|
|
|
OK, I see what is happening The new API is still in BETA. It looks like what happened is that your rig tried getting API data while my API troubleshooting script was running I may have to add caching for it to prevent this in the future or setup something like cloudflare CDN distribution. Will look into it more. For now it shouldn't affect what your mining but from time to time it just reports 0 profitability making it a bug that is just a annoyance.
|
|
|
|
@cryptominer420
ok first problem it doesnt show Neoscrypt in algo list how can i add that?
Neoscrypt is currently not there for Nvidia cards as I am troubleshooting the miner used for it. However it is available for AMD cards as i added gatelessgate as it fixed the sgminer neoscrypt problems. I also now have a discord group setup for the miner. https://discord.gg/QYahvXq |
|
|
|
I am using V1.9, the nist5 algorithm just stopped with no reasons. This is on my test platform with only one gtx 1070ti. My other rig with previous version just works fine.
I had something similar happen. I was watching my wallet on zpool and noticed my 1070 nist5 gpu had dropped out. Looked in the log and saw that I had been switched over to the dev fee wallet. Cryptominer, would you mind just clarifying how it is decided when this switch is made/the fee timing schedule? I'm not worried about it, I just think there might be an issue with my second GPU not reverting back to my wallet automatically (after ~30 minutes on the dev wallet I stopped the mining in the GUI and restarted again. It then switched back to my wallet. I can send over the log if you would like to see it. So far so good with everything else on my end. Thanks! Please send the log as my only thought is that it is happening when there are more than 1 type of GPU in a system. For example I have 1 mixed system that i setup today with a R9 270x and a R7 360 and each mines a different algo when the dev fee kicks in only one of the 2 is switching to the dev fee which is still fine by me. As to the donation and how it should be working After the first 3 Hrs it should switch to the dev address for 12 Min then switch back your address and reset the timer for the next Dev mining for another 12 Hrs. |
|
|
|
I am using V1.9, the nist5 algorithm just stopped with no reasons. This is on my test platform with only one gtx 1070ti. My other rig with previous version just works fine.
If you have teamviewer on the system I would be glad to look. Just Private Message me. |
|
|
|
|
Yea there is a bug that AMD needs to fix in the latest drivers making it so that opencl doesn't report what the device ID's are and in turn the miner doesn't know that they exist.
|
|
|
|
First of all, thanks for all your work with this!! I think it will be very helpful.
Am I correct in thinking that neoscrypt hasn't been added back into 1.9 yet?
I also have access to an rx480 if you would like me to run a couple test with it? (I think you mentioned you just have 1080's?)
Correct neoscrypt and other optimizations will be in 1.9.0.1. I have 470's, a 1080, a 1080ti, 2 r7 360's that I use for testing. my 4 card 470 rig is earning just under $20/Day right now on neoscrypt via GatelessGate which is included in 1.9.0.0. But i would like to know the results on the 480. |
|
|
|
Just tried V1.9, it showed me error that unable to get niceHash profitability data. if you are connected to internet, try again later
Close it and re-open it I just made a tweak to the 3rd party API. For issues that are major like this shoot me a message on twitter. at least until I get the discord server up and running. https://twitter.com/MyCryptoCoinz |
|
|
|
@crackfoo If you feel this doesn't belong here just let me know and I will refrain from posting updates here. zPool Miner Cumulative Updates since last posting here: Last posting here was version 1.8.1.5 Alpha Current version is 1.9.0.0 Downloads at https://github.com/Cryptominer937/zPoolMiner/releasesNew Driver Requirements: Nvidia - Newer than 388.31 Not tested on RX Vega (No Cryptonight at zPool anyway) AMD RX, R7, R9, Redeon HD - Recommend the Blockchain Driver http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspxChanges:- Integrate Legacy GatelessGate, DSTM miners - 0 Fee
- Integrate 13 Algos for nvidia
- Adds X17, Bitcore, Veltor, Phi, C11, Skein, HSR, Groestl, Myriad-Groestl, Tribius, Polytimos, TimeTravel, Xevan Algorythms
- Improved Profitability on all Nvidia 10XX cards Majorly
- Add 11 ccminer Versions
- Integrate SP-Mod, Alexis-hsr, 2.2, Tpruvot, SkunkKrnlx, Palgin, Nanashi, x11Gost, Xevan, Polytimos, Klaust 8.18 ccminers.
- Improved profitability by a estimated 40%
- New 3rd party error correcting json server
- Automatically sets a coin profitability to 0 if it is disabled or removed by the pool.
- Stops miner crashing if a algo is removed from the pool
- Reduces the api load on zpool.ca
Fixes:- Fixed GatelessGate using the wrong launch parameters
- Increased AMD Benchmarking times to account for Bin generation times
- Removed profit buttons from the settings page as there is no alternative for this provided by zpool.
- Major code cleanup should improve performance.
|
|
|
|
Have you tried the Klaus/8.16 as the miner for neoscrypt, seems to give the best hash. Also is there a way to set intensities for the miners to use?
I have 8.18 included but in my testing it was slower in all benchmarks. From my testing this only works well with latest drivers which will in turn slow down other miners. I will test it for a few days and look into adding it as a optional miner like I left alexis for a alternate x11Gost AKA sib alternative. |
|
|
|
1.9.0.0 just released. https://github.com/Cryptominer937/zPoolMiner/releases/tag/1.9.0.0Changes:New 3rd party error correcting json server Automatically sets a coin profitability to 0 if it is disabled or removed by the pool. Stops miner crashing if a algo is removed from the pool Reduces the api load on zpool.ca Fixes:Removed profit buttons from the settings page as there is no alternative for this provided by zpool. Major code cleanup should improve performance. |
|
|
|
|
Planning to re-add neoscrypt after the bug fix release.
I mostly removed alexis as it had api issues if more than 4 cards were in the same system and on gtx 1080, 1080TI palgin was Minimaly slower less than half a MH/s. I will re-add it as a optional miner soon for those with 4 cards or less per rig.
Right now I am trying to get the update notifications to work.
|
|
|
|
|
Update Release Tomorrow:
Just implemented 3rd party json to fix any future issues if a algo is removed from zpool.ca for any reason. It checks if all options are valid and if one is missing it replaces it and sets profitability to 0 so you switch algos. This json updates every 2 Min to keep zpool api calls low. Also fixes issues if you run many rigs on the same IP.
|
|
|
|
|
@winmkx
With your code being closed source and not seeing a license file in the releases I want to ask you here for your permission to include this miner in my GUI zpool miner as a 3rd party miner.
|
|
|
|
|
@palgin
Want to include the miner in my Zpool GUI Miner but as it is closed source and I do not see licensing information. I just want to ask your permission to include it.
|
|
|
|
|
Good catch should be Xevan.
|
|
|
|
1.8.1.7 has been released https://github.com/Cryptominer937/zPoolMiner/releases/tag/1.8.1.7Changes: Integrate 13 Algos for nvidia Adds X17, Bitcore, Veltor, Phi, C11, Skein, HSR, Groestl, Myriad-Groestl, Tribius, Polytimos, TimeTravel, Xevan Algorythms Improved Profitability on all Nvidia 10XX cards Majorly Add 11 ccminer Versions Integrate SP-Mod, Alexis-hsr, 2.2, Tpruvot, SkunkKrnlx, Palgin, Nanashi, x11Gost, Xevan, Polytimos, Klaust 8.18 ccminers. Improved profitability by a estimated 40% Fixes: Fixed GatelessGate using the wrong launch parameters Increased AMD Benchmarking times to account for Bin generation times |
|
|
|
|
Bug found in Neoscrypt release
Temporary fix is to
Go to settings>Devices/Algorithms
For each GPU select neoscrypt gatelessgate and
change the gatelessgate neoscrypt extra launch parameters to
--intensity 13 --worksize 256 --gpu-threads 1
Next open the Bins folder then GLG folder and delete all existing .bin files
This fix majorly improves neoscrypt hashrates.
|
|
|
|
|
Show Posts
