Well my testing shows intake temps cause large power increase.

67f=1365 watts
76f=1424 watts
81f=1484 watts


I was able to get same results with 2 different psus
And on 2 different pools.

I want to do an 86f room test next
Then a 91f

Multiple versions were released.

now I got the room hotter on purpose


temps are

35/81

on gui

hash is 13583


watts up to 1484

room temp is 81f near intake


https://i.imgur.com/7TNfHJK.png

1484/13583 = 0.10935 watts a gh

so

67f = 1366 watts
76f = 1425 watts
81f = 1483  watts -----------  https://i.imgur.com/7TNfHJK.png
84f = 1505  watts -----------  https://i.imgur.com/dMOnY6C.png
85f=  1517
87f=  1545  watts
now  this means in my case  5 months of warmer weather  117 watts x 24 hours = 2.8 kwatts a day or 28 cents  x 150 = 42 dollars extra power  if my mining room runs at 81f

still not up to 86f  but  watts go upwards as temps go upwards not sure  why  as fans are maxed at 100%  and got to 100% when room was at 76f

139 watts extra   67 f to 84 f
179 watts extra  67f to 87f

check out this last youtube  see how quickly watt use drops once I cool off room 


your video will be live at:




https://youtu.be/KEctJaz4Mo0


 Max room temp  for this miner is 86f.

latest video room was 87f

watts use does a big time drop with temp drops.

which  is a twofold issue

A) a few more dollars to run at 76f vs 67f

B) a cap  of how hot  is safe?

So I will  next try an 86 f  test  which should  be max safe power cap


67f = 1366 watts
76f = 1425 watts
86f =    ?    watts





Once I get  a 86f test in.

I will attempt  to go to 90- 91 f    which is over the recommended 86f

I have ability  to adjust and I have  some areas where I can run under 86f  at all times.

If you do not have that ability  at best you spend more power per unit
At worst  you may kill unit.

@ yankees

well  a 60 watt power increase  when I went from 67f to 76f translates to  60 x 24 = 1440  or 1.44 kwatts at 10 cents  that is 14.4 cents a day  extra.

Here in NJ  May 1 to Oct 1 would mean 5 months  where temps will boost power  so 150 x 14.4 cents = $21.60 extra to operate it at the array

So the power boost   means it is  not unacceptable  since the other 7 months  it will drop.

I can make the gear work  at my array with buysolar.  Mostly we have  an excess of paid for gear.

The 2 year warranty has a lot of value.  and  I figure  5 warmer months = only 21.60 per machine.

I will need to test at 86f  so I  have turned on more gear in My garage to get an idea  of what the machine uses at 86f





If I test beyond 86f  it is as a service to community but for anyone running the gear in a 87f room or 31c room  it would be running gear  in a room too hot.





https://i.imgur.com/ztkRMlm.png






2663
root
cgminer --lowmem --avalon8-fan 60-100 --avalon8-voltage-level-offset 0 -o stratum+tcp://pool.ckpool.org:333 -O 16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.100:x -o stratum+tcp://mmpool.org:3333 -O philipma1957.A:1234 -o stratum+tcp://us1.bitminter.com:3333 -O philipma1957_west2:x --api-allow W:127.0.0.1 --api-listen --avalon8-voltage-level-offset -2 --real-quiet
0%
0%



the above is from the processes tab  and it shows  I have -2 offset working

I can tell you my 5 are working fine

yeah  most likely not a viable option.

Just kept on zec it turns a small profit steady.

@Haggs

I set it and I am running at -1  edit all tests below are at -2 offset.

I will post some results in an hour.


I finally got it setup in a way I am happy with for quality tests.



https://www.youtube.com/watch?v=sUaAQbRwd2Y

https://youtu.be/GZh6DSbYK5s

https://youtu.be/imdGUpVlre8

______________________________________________________________________________


cool room tests 67f   gave me

1366 watts and 13603 hash on -2 off set  or 0.1000419 watts a gh


https://youtu.be/1UU_6Zldsww

_______________________________________________________________________________ __

warmer room test 76f gave me

1425 watts and 13603 hash on -2 offset or 0.104756 watts a gh



https://youtu.be/9C1pMljvtwE

___________________________________________________________________
next test I will try to get to  86f or 30c  this is the max room temp allowed for




so a 67f room get really close to spec in terms of watts per gh
a 76f room is 4% over spec in terms of watts per gh

in both cases on -2 setting   hash  rate is 4.5 % over spec

2 year warranty is nice real nice.

thanks  I will go back and do this

please  see if this looks good

---

Moderator's note: This post was edited by frodocooper to reduce the size of the embedded image.

@ yankees  yes   so far it is doing that.


 I will  test with multiple  meters and psu's


but 1469/13700 = 0.107  watts a gh in a fairly cool room  under 80f

this is  a disappointing result, but I will keep testing

I may need to upgrade firmware etc.

I want to figure how cold do I need to get  best watts per gh.

Maybe a poor unit.

I opened my garage  door today  as it is 53f

So my garage dropped 10 f

from  82 f  to 72 f

power dropped to

1469 watts

13703.49  hash

Temperature©

25 / 70

so temp drop lower  power by a lot of watts on  -2 -1 0 off set

---

Moderator's note: This post was edited by frodocooper to reduce the size of the embedded image.

Looks like it will be okay enough to get some.

I have been testing  my new arrival an avalon 841.

I may end up with

T1
T2
Avalon 841

and no more s-9's

room was warm  seems there is a sensitivity to heat.

I will play with it some more tonight

I am in my den and will open sliding door to get temps lower then 82f

I opened my sliding door room temps dropped to 79f

the intake on the miner reads  27c/72c

it was 31c/77c

https://i.imgur.com/Hhk6J8c.png


watts on this meter dropped to 1474  they were 1509  so the temp drop dropped watts this test is -1 offset.  using delta 2400 watt plat psu

so room temp of 77  with unit temp of 26/71 hash of 13431 watts at 1470  17 minute    -1 offset  
"   "          "        74  with unit temp of 26/71  hash of 13490 watts at  1470 21 minutes -1  offset

30 minutes into the -1 offset and   I closed sliding door.

unit temps are now going to rise

30/77  hash of 13545     watts at 1520   30 minute mark.


going to test at 0 offset

  New rasp pi has arrived

It works the sd cards were good.

the oem pi was a dud.  I did a video

showing the dead on and the good one.

I have this running on -2 offset using a  delta 2400 watt plat and I am getting very high power use

1523 watts at 13229 gh

No image just a link to a screen shot

 https://i.imgur.com/TRgGOeH.png

Serves me right to not have a second one on hand.  Still waiting for it.  My UPS guy comes from 2 to 6pm on paper  but in reality mostly from 5 to 6:30.

This does show why parts and service are really important.
MY 'free' sample came with
1 Avalon 841
1 rasp pi in a case with a micro sd card
4 usb cables
4 dongles
1 5 pin cable

A rasp pi for me is a 1 day wait from amazon  as no local store carries it.
So to anyone that wants to get the avalon  especially 4 or more  have 2 rasp pi's makes lots of sense.
While I type I will post the unboxing I did yesterday.

it will be on you tube soon.

Your video will be live at: https://youtu.be/lyHSeEOYHr0



I want to make note

a rasp pi 3 can be found on amazon
a power brick  for the rasp pi on amazon
usb cables on amazon
even the 5 pin cable is available on amazon

the usb to uart dongle is  an avalon part.  they sent four to me which means I may be able to help out with that.

Well I tested the rasp pi 4 ways it is dead.  so I am waiting on amazon to send a replacement one.

okay so we have been at 2000-3000 and that  is why we are slow correct?

@ yankees you are welcome


@ doc  H.

every round prior to the current round is 1 to 3 days

I have kept 1 Dragonmint T1 pointed here.

I have a question why is the current shift over 5 days long?