One concern. Per the website provided: This Antminer S11 is not only the first 10nm miner for retailuse but using less than half the energy per gigahash of the S9, but it is also our most powerful miner to enter mass production . Yet the stated power consumption is 70J/TH. The S9 is 0.098J/GH, or 98J/TH. 70 is not "less than half" of 98. Also, 70J/TH @ 22TH = 1540 Watts, not 1340W as advertised, and thats just for the chips not including power supply losses, fans, controllers, etc. Also concerned that the same chip number, BM1387, is being used for both the current 16nm chip and this proposed chip. That is rather unusual to say the least. This level of "sloppy" rings of a fake ad. look at the ad https://i.imgur.com/Xf10Fel.png full size I see lies or errors just like you see.  |
|
|
|
Ooo I like surprises.
on the big stats page. I am number 38 at 16th. I am not using an avalon 841 I am not using an antminer s-9 which leaves ? It appears to be doing its thing correctly. I will leave it for a while. I won't make any announcements as to which miner it is. I Leave it up to the DOC. |
|
|
|
|
Yeah they are about 50 for a pair after shipping he raised price.
I got 4 for 91 and earned 7 in ebucks so I got them at 4 for 84 or 21 each.
But the B52 earns 50 a day so a dead fan means I lose 50 a day.
I now have spares.
Also I am cooler 3-4c
I am quieter 3 db
I use 50 less watts
that is 1200 watts a day or about 14 cents a day so in 300 days that is 42 bucks. which is what 1 pair cost.
|
|
|
|
So quiet in here.. what's happening?  ) What you're mining lately? I personally keep my ATI to nicehash cryptonight7 and nvidia all to raven, sometimes I'm switching towards pigeon. I've heard about Lux, but did not have time to read more about it. Whatcha think? Only nVidia GPUs here as well... LUX and Zen. Occasionally my Awesome Miner will switch my rigs to BZL and SnowGem in the last few days. My couple of old ASICs are mining X13 at Nicehash to pay the electric bill. any links for lux and zen? I am hodling 5200 rvn and 5000 sia mining zec now with 4+3+4+10 = 21 1080tis I have been asic busy lately The b52 which is the s11 is a sia mining beast. fans are shitty and loud so I found some san ace and switched. temps dropped 5 c and less noise . also power dropped 25 watts. The b52 is earning more then 50 a day at about 1450 watts |
|
|
|
|
Well if the gear can't run in a 95f room.
Then the T1 may end up to be what I need.
I can keep room at 95f in the summer if it is 98f real world temp.
Basically I can get the room 3 f cooler then outside temp once outside temps gets into 90's
So maybe it fails. maybe it does not
maybe I add more fans or one more heat shield
|
|
|
|
If room temp is 95F I think you will have problems. I have one that rarely runs longer than 24 hours in 20C and unit intake temp is constantly at 28-30C for some reason. Will just go into idle status and not start hashing again until I cycle PSU. Another 841 in same environment runs fine. May be luck of the draw where some of these are more sensitive than others. I may also have a dud, but I'm interested in seeing others room vs intake temps.
Well it won't hit 95f until the summer or late spring. but it will get there. |
|
|
|
I did a screen shot price for 1 miner S11 and shipping to usa coinbase price right now is 8922 so .446 x 8922 = 3979 usd you are off by more then 200 usd in your favor. I can guarantee it is always off in your favor as I check it 1 time every hour for days now and it is always 100 to 350 usd in your favor. As it should be about 3500 + 120 to ship or 3620 usd . It has never been this price. On 3 different exchanges all the times I checked. I don't mind the extra 100 to 350 overcharge I mind you hide it. You have done it for years. Why not simply say BTC rates and LTC rates are Slightly higher due to exchange costs. The no one would complain. I have purchased 300,000 in gear since 2012 I have never purchased a single item from you because you do this. I own a dragon mint b52 which is the same as your s11 it is a fine miner I would buy the s11 from you if you were transparent about exchange rates you are not. To all the S11 is good gear well at least my B52 is good.  |
|
|
|
Yes, there was just some BCH added to your account - nothing removed. As usual you can see all changes on your account under "my account" -> "transaction history" in the website menu.
Thanks I got a bit of bch. to all miners here The Doc and I are working on something today maybe it will be setup by days end. |
|
|
|
|
It is being shipped by DHL and is due on Weds.
Buysolar went to Beijing last week did training.
The are shipping a 841 for us to test.
They also demoed a racking system prototype.
We are getting the 841 and will be testing it and demo with some youtube and various psus.
I am curious to see if -1 setting using a corsair 1500 watt titanium will yield lowest watts per gh.
Our cooling at the solar array keeps temps at 95f or lower in summer. It should be interesting to see if it holds up at that temp.
DHL says item arrives on weds the 25th.
|
|
|
|
Yes, all units had static ips.
look at this screen shot factory reset button looks like it could save you not sure about ip set but factory reset should get you out of the static ip https://i.imgur.com/L5khpR4.png
Moderator's note: This post was edited by frodocooper to remove inline image tags and a nested quote. |
|
|
|
I just installed " https://download.halongmining.com/testing/t1_20180418_054846.swu" on 3 of my miners. It went fine for two of them... but one seems to now be bricked. It does power on, no fault detected, green light turns on, fans turns on, ethernet light of my switch detects the miner. But the static IP I gave it is nowhere to be seen. A full ip scan reveals no new device on the network either. Is there a way to unbrick it using the sd slot? Thanks well the static ip caused your firmware update to brick unit. I did that update with zero issues . did you have static on the other units? |
|
|
|
Phil, Citronick Thank you very much for your support! Hopefully after a couple of years i may become Legendary again  Best Loshia Maybe they will fix the issue |
|
|
|
I am officially a loyal member of ck pool. Just switched my new miner to the server.
I’m in it for the long haul.
Any info on start up time or anything else that’s useful to know about the pool?
The pool is small and it takes time to hit a block. The pool pays dust kano's pool is yet to pay dust. How many miners do you have? lastly. and here is the part people do struggle to understand. it pays based on an average of how long it should take to make 5 blocks. You are a johnny come lately so to speak so you will need to mine a while to get a full share. Maybe on the 5th block the shares will be full. Since the shares are based on the last 5 blocks (assuming normal luck) |
|
|
|
this is not always true. in usa 14 ga wire can be in circuits 12 ga wire is pretty good 10 ga wire is no wqrries. if he has some 14 ga wire in his apartment and puts a 20 amp circuit breaker he can do a fire in the wall. . another problem is aluminum wire. rare but if the building was built from 1965 to 1975 some areas allowed it to be put in due to copper shortage ( Vietnam war ). Aluminum is shitty compared to copper and in a house really shitty. I know this because my home in NJ had aluminum wire. I fully wired my home with copper in the 90's I put in a lot of heavy duty wire for amps to run subwoofers ,lucky as my house now has 2x 30 amp 240 volt circuits for mining. and only 1 subwoofers for HT |
|
|
|
|
Buysolar and I Are waiting on 841 delivery.
We will do a heat test as we run 95 f in the summer
That is 35 c
|
|
|
|
Hi,
I have two questions.
What is the difference between Kano.is pool and CKPool.org?
Also,
I pointed my S9 to Kano.is yesterday, how kind is the start up time for the miner to get paid? Is CKPool.org better?
Thanks for your help
good question. I stopped mining at kano I now mine at -ck This means I personally like -ck pool better then kano pool. |
|
|
|
I have 5 dragon mint t1's pointed at the pool http://ckpool.org/users/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJrI just did newest firmware. { "hashrate1m": "80.8T", "hashrate5m": "75.2T", "hashrate1hr": "71.3T", "hashrate1d": "65.5T", "hashrate7d": "71.6T", "lastshare": 1524410984, "workers": 6, "shares": 23453278127, "bestshare": 65201213603.0, "lns": 23412458403.74101, "luck": 1.0, "accumulated": 0.0, "postponed": 0, "herp": 23365027430.19287, "derp": 0.01545879, workers below {"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr", "hashrate1m": "19.3T", "hashrate5m": "16.7T", "hashrate1hr": "15.7T", "hashrate1d": "15.6T", "hashrate7d": "31.2T", "lastshare": 1524410981, "shares": 12575870376, "bestshare": 65201213603.0, "lns": 12541269216.09229, "luck": 1.0, "herp": 12485112015.0107}, {"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.1", "hashrate1m": "11.7T", "hashrate5m": "12.8T", "hashrate1hr": "13.9T", "hashrate1d": "13.9T", "hashrate7d": "10.5T", "lastshare": 1524410979, "shares": 2812951419, "bestshare": 2845697629.0, "lns": 2811021398.57471, "luck": 1.0, "herp": 2802427543.1143}, {"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.2", "hashrate1m": "23.4T", "hashrate5m": "17.4T", "hashrate1hr": "12.2T", "hashrate1d": "1T", "hashrate7d": "916G", "lastshare": 1524410976, "shares": 399802455, "bestshare": 128850564.0, "lns": 399055301.911036, "luck": 0.99, "herp": 396365942.9762259}, {"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.3", "hashrate1m": "16.1T", "hashrate5m": "15T", "hashrate1hr": "14T", "hashrate1d": "11.2T", "hashrate7d": "9.34T", "lastshare": 1524410984, "shares": 2465198875, "bestshare": 6579318564.0, "lns": 2463892292.306525, "luck": 1.01, "herp": 2479678587.742832}, {"workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.4", "hashrate1m": "17.1T", "hashrate5m": "14.8T", "hashrate1hr": "14.8T", "hashrate1d": "15T", "hashrate7d": "10.9T", "lastshare": 1524410978, "shares": 2880667963, "bestshare": 4166801266.0, "lns": 2878673941.588209, "luck": 1.0, "herp": 2882399576.194761}, I cleaned it up a bit but the info above is the relevant info. 4 are on efficiency setting worker no 2 is on balanced. Pool is up to 10ph http://ckpool.org/#/miners |
|
|
|
|
First do you have access to the circuit box?
If you do take a few photos and post them.
If you don’t have access to the box I would suggest you don’t mine with three large rigs.
Since you don’t know how much power you have available I would do one three card rig first.
|
|
|
|
|
hashnest.com
buy shares of the L3+
|
|
|
|
|
Show Posts
