This is wonderful news! Now they need to drop their pricing and shipping times to get us small guys up to speed.
I have no idea what price allows them a profit. But a moq of 2. Would help a lot. The corsairs are due on Monday my guess is under 1295 watts since it is a titanium Moderator's note: This post was edited by frodocooper to remove a nested quote.
|
|
|
doing the low power setting gets 13.8th to 14.1 th at 1326 watts here is a youtube video https://youtu.be/K_ksMluPUZIthis is subject to change but it means 1326/13800 0.0961 watts a gh = king of efficiency. this is improving not getting worse hash has drifted up to 14.5 and still 1326 watts 1326/14500 now 0.0914 watts the king if it holds onand a corsair 1500 watt a evga 1600 g2 p2 or t2 will do this unit Will do testing tomorrow with a cosair Ax1500i at 120 volts and at 240 volts. So the new firmware rocks.
|
|
|
Yeah safari is dying fuck apple. I have to stop using it and move over about 100 passwords to chrome. This software will be nice if I settle in with easy watts for pdu's 1400 watts or lower works really well @xdrpx The T1 board uses the exact same heatsinks as the s-9. The board is a bit different in layout. the efficient setting lowers fans to 60% in an 85 f garage noise becomes okay. still tuning,but this firmware looks like a winner for me on low hash setting. It rocks at efficiency setting 13.85 -13.90 1325 watts you tube link https://www.youtube.com/watch?v=K_ksMluPUZI&t
|
|
|
to make it clear I named the worker over http://ckpool.org/users/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtjeso give it an hour to settle in for hash rate power on k-watt is 1646 watts "workername": "1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.firm415", "hashrate1m": "9.43T", "hashrate5m": "4.05T", "hashrate1hr": "416G", "hashrate1d": "17.7G", "hashrate7d": "2.53G", "lastshare": 1523808733, "shares": 359619, "bestshare": 861686.0, "lns": 359619.1, "luck": 1.01, "herp": 361876.5063849979 } ] }
|
|
|
nice I will fire it up now
|
|
|
Note I say this because I was looking to support ck.'s pool and don't mind mining with his pool first and slush second. If you really want pool choice the T1 is limited .
My partner buysolar should be landing in China in 2 hours time to meet up with Avalon/Canaan We will be using some of their gear very soon.
The Avalon 841 could prove to be a little better then any of the three in question.
Phil, you do some really great work for this community!!! Thanks for supporting -ck's Pool like you said you would, by aiming your Dragonmint there. You are literally the first person I've seen, during this release, show support for -ck's Pool. This past week was the first time I saw Hangolin's PR mention -ck. Just a small head nod towards his programming skills, but no mention what-so-ever, about his pool's ability to run the Dragonmint. Goodluck to yours and buysolar's venture with Canaan. The 841's I have are very stable, and actually work as Advertised. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) When I was a kid it was Ford, GM and Chrysler So with this gear If it is Bitmain, Avalon/Canaan, Halong/Innosilicon. I can work with it. Things I like about the T1 it will be software clock-able So jury is still out but I am hopeful that the low power choice does 1300 and 14th. To those not mining at -ck's pool why the fuck not? I know variance. So point 1 of every 5 of your miners. 5 T1's http://ckpool.org/users/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr1 T1 http://ckpool.org/users/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtjethis one is in my garage on first firmware upgrade pulls 1608 watts 15.42th hash rate https://i.imgur.com/awfzwv1.png1608/15420 = 0.10428 watts a gh at kwatt meter tomorrow I get 2 of these psu's https://www.corsair.com/us/en/Power/Plug-Type/axi-series-config/p/CP-9020057-NAI will hook the two up the my 1 Ti in house. Use one with 2 boards and one with 1 board and the controller. see what It drops to. As a second point with this psu. I got mine on sale refurb for 250 each. If -ck is correct and the low power setting is 1300 watts at the wall then one of these will run the T1 on 120 volts. which for USA buyers means something.
|
|
|
still available for $450/420?
He sold all of them. Note I tagged you for begging for a coupon from me the same day you joined the forum. Plus you had never made a post. your post here was made hours after you asked me for a coupon. I simply want people to know what you did. As there has been more then 1 coupon scammer floating around. To Join a forum not post and beg me for a coupon is not trustworthy. If you had simply had a few posts and waited a day or two to ask you most likely would have received a few from me.
|
|
|
ok...my bad.....good to know...but yeah...what I was shooting for...all and all ....oranges to oranges between models and companies
" a little better then the S-9"
that clears up how this all shook out
thanks
brad
Note I say this because I was looking to support ck.'s pool and don't mind mining with his pool first and slush second. If you really want pool choice the T1 is limited . My partner buysolar should be landing in China in 2 hours time to meet up with Avalon/Canaan We will be using some of their gear very soon. The Avalon 841 could prove to be a little better then any of the three in question. Moderator's note: This post was edited by frodocooper to remove nested quotes.
|
|
|
Ah, but Phil...did they not 'get you' on electricity with the DragonMint units? or is Innsilicon units less of a risk of not meeting spec?
(just saying...not a slam...from what I've seen on this thread)
brad
Please don't count me with other buyers. I have yet to be billed. I have 5x T1's and 1x B52 I have stated on the forum I have yet to be billed. So I can't say I hate anyone. From their company. I have stated early buyers got hurt. I also told everyone don't buy until I get get and give results. Results are showing it is most likely a little better then the s-9. Moderator's note: This post was edited by frodocooper to remove nested quotes.
|
|
|
Yes it's under 1400W, and a lot quieter too. It will depend on where the most efficient hash/power curve ends up on the device but on the hardware I've tested it on so far it usually ends up around 1300W. So if some are higher power, they should be offset by lower power ones too. I'm talking about power at the wall this time.
good this will allow 4 units on a 30 amp pdu. please post link for firmware when you can. I just drove over to the solar array and did firmware update #1 firmware update #2 should be great looking forward to it.
|
|
|
bump second price drop
now $1875 for pair free shipping to USA
|
|
|
..... ..... Here's a performance tab teaser they said they're working on: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FLiV4T3k.jpg&t=663&c=fB4H3r9bKdQ88g) this firmware would make the gear pretty good for me this would be 4 speed choices 1 Off the miner will work with the factory default values2 Efficiency the miner will use less power but the hash rate will be lower3 Balanced default value to achieve balanced hash rate and power consumption4 Performance high hash rate and high power consumptionif Efficiency does 14th at 1375 watts this is a good miner for my purposes. 4 x 1375 = 5500 watts and that means 4 units per pdu Since I have 5 circuits of 30 amps I can do 20 units. the gear now pulls 1640 watts which is 3 x 1640 = 4920 4 x 1640 = 6560 this means 3 units per pdu and say an L3+ I hope this gets done soon. And I hope the 2. Efficiency is in the 1400 watt range.
|
|
|
Hi, Does the dragonmint T1 new firmware offer any improvements in hashing speed, or was it to update a different issue? Thanks! It gives better graphics maybe a little better power draw. maybe a little better hash. say 1650 watts at k-watt meter say 15540 gh vs 1679 watts 15300 gh this particular unit is the one I tested on old firmware with 3 psu's I need to check power again i am now at 1640 watts 15540 hash 0.1055 watts a gh
|
|
|
So, the crypto market has seen a nice spike upward over the past 24-36 hours that includes most of the coins that I own/mine. Notably absent from that group was RVN. Its value has remained flat. Do you any of you veterans have any speculation on why this is? Is it just the relative obscurity of this coin?
It is soooo very new think months not days. I mined 11000 of them. I sold 6000 and will do a long hold on 5000 of them The 5000 are in a core wallet. I will revisit them on June 1 ,2018 if they went from 0.00000555 to 0.00001111 I will sell 1000 of them I will then revisit them Aug 1 ,2018 if I did the early sale at 0.00001111 and they are now 0.00002222 I will sell 1000 of them. I would with luck and over time make sales of 1000 coins at 0.00001111 0.00002222 0.00004444 0.00008888 I would hold the last 1000 for a longer time till it reached. 0.00022222 then sell 500 and hold the last 500 even longer. Since I sold 6000 at about 0.00000580 = 0.0348 btc which is held as btc and now worth 280 usd I paid about 100 in power So I am up 180 usd and holding the 5000 coins in a wallet. I can think longer term.
|
|
|
Hey all, I've googled this and found a few responses, but not one that has a solid answer on this question, so here is my scenario and question.
We are looking at ordering just over 2000 S9s. We want to place them in mineral oil, and we want to remove the fans or at the very least have them not running. I believe the way that the firmware is setup, the unit won't run without fans. I have read that there may be a way to trick the unit into thinking its attached to a fan by rejigging one of the cables that is plugged into and powers the fans, but comments have been made highlighting that the unit will still want to draw the same amount of power, despite not powering the supposed fans.
A really creative answer was to cut the blades of the fan off, but again, still drawing power to spin the fans, so that is not optimal.
What I'm looking at is a way to either: a) run the S9 without fans and without taking that additional power that the fans draw. or b) run the S9 with the fans, but disable them so they don't take the additional power that they draw.
Is this possible and if so how?
Would much appreciate your advice and input on the matter.
The solution for you is worth money. If you are building a 2000 rig setup offer a bounty for the answer to this problem.
|
|
|
At the wall power consumption of with DragonMint 1600W PSU and dual fans 1480W @ 240V at ambient temperature 25°C. Variation of ±8% is expected.
To be fair 1480w + 8% is 1598.4w What I find a bit scary is they are selling these with 1600w power supplies and putting 100% load on them. That sounds like a real bad idea. every one of my six is at 1610 to 1679 all over +8% every miner is about 15.4 not 16.0 that is -3.75% so it is off close to 12%. frankly I can live with the 15.4t vs 16.0t but the 1610 watts to 1679 watts vs 1480 watts is an issue. all my circuits are 30 amp about 238 volts that is 7140 watts x 80% = 5712 watts 4 x 1480 = 5920 watts that is 83% close to okay . Ie it will work if it is cooler then 85f-88f 4 x 1610 = 6440 watts that is 90% not that close and I know my breakers will trip if it not 60 f or cooler. so I have to do different setups. I really wish they went with 1300 watt baseline and claimed 14.5 th if it then came in at 1450 watts and did 14 th I would be fine. Now these are first run maybe a bit of tweaking and they get better. They made a B52for SIA it does 4.15th and says 3.83th so that is better then the spec claimed.
|
|
|
but the gear does not do 16th or 1480 watts.
every one of the six I have does over 1600 watts on a myrig psu. that is an issue.
By the way, the unit says 1480W on the side of it. The myrig PSUs are rated at 92% efficiency. That would work out to 1608W at the wall. While the hash rate might be lower than advertised, isn't that close to spec on power? I'm not making excuses for them, but I'm wondering if everyone's expecting them to be 1480 draw at the wall? could be this: "DragonMint T1 Miner
The DragonMint T1 is the worlds most efficient Bitcoin miner, operating at 16TH with AsicBoost technology inside for greater power efficiency.
At the wall power consumption of with DragonMint 1600W PSU and dual fans 1480W @ 240V at ambient temperature 25°C. Variation of ±8% is expected."right from this page https://i.imgur.com/MTUg3l9.png
|
|
|
now i do have 1 question for all of u t1 buyers....y did u decide to buy these when they only work for 2 pools?? doesnt that limit your choices pool wise??
I didn't buy one of these... but wanted to chime in. The early buyers did not KNOW about the AsicBoost issue, so they bought not even knowing there would be use limitations going forward. This is true no one new about asicboost until Feb of this year. I don't have any issues mining at ck pool Slush is a meh for me. but the gear does not do 16th or 1480 watts. every one of the six I have does over 1600 watts on a myrig psu. that is an issue. not a single one of the six I have does over 15.8th long term. that is an issue. To anyone that purchased looking to solo mine BCH they would be hurt. To anyone that purchased looking to solo mine BTC they would be hurt.
|
|
|
|