Okay so how do I get two 821s.
Can’t figure out how to be listed.
So tired of the difficulty in buying asic 256 gear.
5pm MST on 12 January on their website. They will also be providing a private link on this thread at some point for 10 821s reserved for forum members. I get tired of that treatment. I can order 2 every month even when they are stuck and cant sell them. I was buying when no one would buy them. I order 20 to 30 units a year mostly s-9 not because I like s-9 but they were easier to order. My problem is I like to do endless small orders and at the end of the year it comes to a lot of gear. Unfortunately even though I purchased 100's of units from bitmain and canaan they dont care since I order 2 units at a time. Although I did 2 group buys of avalon 6's with more then 50 purchased. I guess I will check the website like the rest of us. Or better yet just buy more gpu's |
|
|
|
philipma1957, thanks for doing that. I didn't know how to properly embed a photo.
I fixed your image below
your image was far too big to imbed. |
|
|
|
Talk to me then. Send them back for those?
That's your decision to make, not anyone else's. Why did you buy them for $500 a piece in the first place? If you just thought they're cool and you'll make tons of money with them and didn't do any real research before placing the order then yeah, it's better to return them I suppose. Then do some reading. Then order something that is actually worth $500. In general you're supposed to do things in this order: first you do your research, then you order equipment. Looks like you did the opposite.  Ahh..no. Thats the going rate for them. I mean, if you could find them for $300, please point me in the right direction. The problem is, I don't know what they are "normally", except what i've seen posted. They are a fucking ripoff send them back |
|
|
|
Antminer rejects every attempt at cleaning up kernel with updates no matter WHAT I try it with, including the "clean up the mess that happened when you tried to update and it wouldn't" version they have on their site.
The miner just will. Not. Accept. Any. Fixes.
how can I check what the config bin file is or where?
And again, how do I do an SD card reflash? It violently rejects any attempts at reflashing the firmware via the "you have been hacked and this is the web interface you get now, sucker" interface.
i have a few miners with two boards. I also have a few spare controllers. Where do you live? USA New Jersey Is my location close to you. |
|
|
|
So what’s everyone mining? You using these as lottery or are you mining something for a HODL? Anyone hit a lottery?
lottery at this site Doge and/or LTC and yet to hit either one  |
|
|
|
Guys and gals.. seriously, buy yourself an airline ticket and come to my house in Brookfield, Wisconsin USA if you want to see this thing in person. Otherwise, this is all I'm authorized to display online at the moment:  Ya, ya... go ahead and laugh or scoff. I am not laughing at the photos of a power meter I fixed your image below  But I have to say quite a campaign and when they are ready for someone to demo it drop me a pm. page 26 for the thread. BTW I know how to demo it in such a way that no one need see any design just good clean info like this you could do this and it would not show the gear but enough info that it could show the hash rate.  |
|
|
|
|
Okay so how do I get two 821s.
Can’t figure out how to be listed.
So tired of the difficulty in buying asic 256 gear.
|
|
|
|
My pm box is still waiting for an offer to demo this item. I will accept it test demo show many videos and either buy it or ship it where ever they want it shipped. https://bitcointalk.org/index.php?topic=2458213.msg26540419#msg26540419going to be doing it here with this gpu miner. I will get thousands of views on it. So the the builders of this shoot me that pm. To all others if they shoot me a pm and offer that demo I will let you all know. To anyone looking to buy this it is your money. |
|
|
|
Hi. I am tired now, tried fixing my transaction today, but i feel incompetent.
I sent BTC from Bitcoin Core wallet to Coinbase, its been pending for 3 weeks. Trx id says 10 days and zero confirmations. But it has been pending since the 12th of december
If anyone can push it through it would be nice. I've tried the accelerators, but they are allways busy. I would be a very happy man if someone could help me out. Sorry for being a pleb..
TX ID:
8cf13c3a51c9ae898b0950bab9e077891b59840831d13a2e411d8ed0e44918a6
16ec484870fdc320e49b56035e1a625f447c4490606e3a7749ba3919744dff9c
I am on a shitty iPad can’t look at it till I can get to a pc. |
|
|
|
Actually you posted that yt video solution in response to my dead fan in the Moonlander 2 Support thread, philipma1957  I'm going to do what you did, so I'll be keeping this one and hopefully acquiring more soon. Yeah to me I had the stud hubs laying around. I have sooooo many fans laying around using my fans and not using the little ones is good. I posted a wanted ad in marketplace. https://bitcointalk.org/index.php?topic=2692164.0 |
|
|
|
I have 2 moonlander 2 sticks one fan died I did this fix and I now want your moonlander 2 sticks if you fan sucks and vibrates I am usa based. I will pay with paypal since I want working sticks with dead fans. Not dead sticks. https://www.youtube.com/watch?v=H-4QqZKMKWAthey run 65 plus shipping from asicpuppy I will pay 65 and you handle shipping. they fit in a flat rate priority usps box. so I will pay a little less since you are looking to dump them. If you want btc or another coin you will have to send the stick up front.I need 4 to 6 of them I have 2 on order from asic puppy my setup will do 8 sticks easy I own 2 of them so if your fan died I will take them and run them with my setup. |
|
|
|
I am just curious and would like to try out a few things just for the fun of it.
I was in your position a few weeks ago, crypto-words - I got a Moonlander 2 and it's great if you, like me, want to dip a toe in the contemporary world of ASIC litecoin/altcoin mining. Unfortunately the fan died on mine and I'm still deciding on whether to replace said fan or get a couple more Moonlanders, remove all the USB fans, and cool them externally. There is no USB miner that meets your conditions.
The FutureBit Moonlander 2 is the closest, but the profit isn't "high" in nominal terms. However, it is high in that it not zero like every other USB miner.
wavelengthsf is right, from the research I've done and from reading this forum the Moonlander 2 is the best for your buck; however I learned pretty quickly that unless you have a very specific goal or coin in mind you're not really going to make any notable profit. There are bigger, better rigs to mine with, both ASIC and GPU, and you can find plenty on those here as well. I will buy the moonlander 2 from you my fan died and I did this https://www.youtube.com/watch?v=H-4QqZKMKWAso I want to get a total of 6 more sticks . |
|
|
|
Oh right, my rig is gonna be 8 AMD cards, and 4 NVIDIA cards!  Will that be a massive problem? How do I manage my devices? Can't I do it all on one monitor and use dummy plugs whilst managing the overclocking? which is why 12 card rigs can be stupid there are a few ways to do it if you want to mine on nicehash you can run multiple instances and setup the nvidia to one coin and the amd to another coin but in the end both coins will be auto converted to btc. I run a cpu and an amd on nicehash doing cryptonight I then run a second instance for the 2 nvidia cards for zec on one I check the cpu and the amd on the other check the nvidia but in the end they all become btc |
|
|
|
The really ODD part is that it's NVIDIA cards that are in really short supply now, AMD cards have had the pricing jump the last week but they're still AVAILABLE, Nvidia cards 1070 and up are not only price rise some but availability VERY short.
It's not just Newegg - EVGA themselves had very few "available" cards in the 1070 and up range when I checked this afternoon, NONE of the 1070 ti models except the Hybrid, 2 or 3 each on the 1070 1080 and 1080 ti.
Evga should be on track today the 4th as they are supposed to start shipping again. 2 1070 0 1070 ti 0 1080 1 and perhaps 2 1080 ti models in stock (can't tell for sure on the "members exclusive one". That's ALL that EVGA had in stock on their web page just now. 3 or 4 models TOTAL across all 4 types of GPU out of 49 models they have in that range. Worse they have yet to ship my gear ordered on the 26th of dec 9 day delay = unacceptable |
|
|
|
Ok, so I’m pretty good with Linux development programming so I wouldn’t think this would throw me for a loop. I unboxed the motherboard and was pleasantly surprised that is had a upgrade. An onboard vga slot that the seller said it had not. Ok, I went ahead and inserted the appropriate Ddr3l ram and connected the 24 pin and four pin cpu connectors from the EVGA psu. I plugged my monitor into the vga and then turned the PSU on. The cpu I could hear powering up. But nothing is being displayed on the scree? Ism’t The BIOS preloaded? I tried to insert a graphi card after powering down and using the hdmi output to see if I could get videos. Power up, the GPU fans spins but still no graphicss to mod the BIOS. Is there something wrong with the board, or just me  . I tried all sorts of configurations going as far Ass creating a boot drive for win 10. How can I tell if the BIOS is intact, and if. Or how do I flash the bios on this model did you plug power into the sata and molex slots? they need power |
|
|
|
Anyone here using nicehash wallet to coinbase wallet??
Would like to know how it’s going
Works fine for me. If I keep hearing this I might switch back Working fine for me as well. I did have that delay this morning for the first time, but it resolved itself within a few hours. When it paid out what was in your wallet? |
|
|
|
I'm trying to setup the usb key ith latest macos ; i followed all the instructions , i can see the device in /dev/ , it flashes when i start bfgminer ( both yellow and red leds , i had to start with administrative rights ), but then i get the following message : NO DEVICES FOUND: Press 'M' and '+' to add and no way to add device(s) cfr: https://www.dropbox.com/s/ny17lbdjx1l3vuv/Screenshot%202018-01-04%2018.47.05.png?dl=0any hint ? no support in bfgminer did you download jestanop's drivers? I am pretty sure they need to be his drivers and not bfgminer's |
|
|
|
Yes the stock heatsink is not designed for fanless operation. Even at base frequency and lowest voltage you risk overheating with no airflow. Running 10 ML2 on Sipolar A400. Had an Arctic USB Fan blowing on them on the side. Ran into random ASIC stop hashing (likely due to overheating). Your driver update brought them back to life, but would die again shortly. Anyway, bought a bigger $4 USB fan from Daiso. That actually moves more air and keeps the "stopped hashing" error message away. So, I believe it was a heat issue. Daiso Fan here: https://i.imgur.com/GsVRLs1.jpgYeah my conclusion is remove stock fan and use a good fan. my sticks are on 756 freq and do 5mh they are not hot. eventually I will run eight with the scythe fans. |
|
|
|
Based on the issues with the first few S9 batches, and the existence of the T9, the primary issue they seem to be having is "chip to chip variation" is VERY WIDE on 14/16nm node processes when one is trying to push the chip as hard as Bitmain is doing.
Based on the issues they had with the S7, they may also be trying to push the thermal density more than they should be.
So in your opinion is this a QC issue or a development issue with the chip just can’t handle the load? many believe that due to size of chip 14/16nm and high power sent to it that it can not help but have power leakages. there are 189 chips doing 13.5 th there are 189 chips doing 1400 watts Intel has the i7 6700k and it had a higher fail rate then previous that was their first 14nm chip and it did have a higher failure rate then previous cpu's it was the first intel cpu I ever fried out of 300 or more used in builds. I would love the next design to use less power and less chips and run cooler. |
|
|
|
|
Show Posts
