Workername_diff0.128 or somewhere on site in account settings you can set diff for each worker.

Well, hashrate on site can take up to 15 mins to show. With payout address, I've used cryptopia/polo/bitrex generated wallets and all was good.
Did You enter your pin?

The Block Factory.
On of the best, but set manual diff (it's somewhere on site or You can add _diffXXX after Your workername) because otherwise You'll have around 5-10% rejected hashrate.
Just make sure to check on vardiff which diff suits You best!

https://github.com/alexis78/ccminer
For complied version I personally use one that is attached to Sniffdog miner (https://github.com/nemosminer/ccminer-Alexis78/releases/download/ccminer-alexis78/ccminer-alexis78-ms2013-cuda7.5.7z)
for setup - this works for me

http://imgur.com/a/aW1X5

Well Your OC setting is pretty bad. with 75% TDP, +120cc, -502mc 1080ti doing 960mh easily taking 210W MAX (Not counting Zotac Amp Extreme - these takes 230 for full 1GH).

Lol are you mining with nicehash? Even with profit switching software I'm getting like 4$per card profit.
Moreover, those cards will still worth sth' in next 2 years at least.

Can android wallet stake?
It looks exactly like desktop wallet
Can I share same wallet across few devices?
XLR looks great for me

Diff is in crazy state right now because of zpool switchers on low (150-200) and pumping it with hashes to 700-1k.
But still good, taking in account it's stakable

You can use antistatic brush to clean Your parts first, then Use compressed air or compressor to get rid of the rest.
I'm cleaning my rig once a month, because it's in the basement

I'm mining XLR now, kind good, but it really need other exchange than cryptopia, same as BitCore.

Depending where are You from for EU and which PSU's you have - I'll buy some
Did someone mine DNR on 1080ti?
Saw some hashes on Zpool/yiimp - isn't 1080ti overkill for DNR or just DNR is not so profitable?

Whoa that 0.25Eur made my day xD Where do You live?
I've 0.10$ per kWh at home, and 0.13$ at my office. Been using office lately to get some costs going into my company
My whole bill for mining is around 100-120$ per month.

Well imo it'll be LTC - it's hovering between 42-47$, when BTC spikes hard. If You'll look at chart, it's going slowly up all time. Also there wasn't any hard dumps/pumps recently on LTC.

That's what I think but somehow it don't
So to stop offtopic I'll share some of my mining strategies with 1080ti:
1. Straight Coin mining:
1080ti is a beast in certain algos and petty player in others (Ethash)
Best bets so far with 1080ti based on overall performance are (in my subjective order): Skein, Blake2s, Lyra2v2, Skunk, Nist5, Tribus, Bitcore, Equihash.
You choose one coin from the algorithm and mine it. Pretty simple, You can also use profitswitch miners to mine Your coin on yiimp pools.
Then You are selling aroung 80% of your coins at 1-5 days interval based on market (It's important to choose coin that You believe in so You won't panic at dumps).
The coins I'd recommend are : DGB, Verge, Bitcore, Solaris, Zen/Hush (It's my personal list so don't take it as best option).
That way (by mining straight DGB on blockfactory) I managed to get 13% of my overall investment in month.
20% of coins mined builds pretty solid base for future price rise.
This method flaw is that sometimes (on dumps) You can't cashout immediately.
2. Profit-Switching Mining with to-BTC conversion:
Taking list of algos from previous method We can set up profit switching software to mine "most profitable" (based on network diff/pool hashrate) option and convert any coin mined straight into BTC.
That works on pools like Zpool and Hashrefinery (You can also use it with right conf file to mine on official Yiimp pool but without conversion).
This method let You cashout in fact less often than method 1 (especially if You are mining on Zpool), because Your coins need to be traded to BTC on exchange so process can take up to 24h untill Your earnings are credited.
It could fluctuate a lot depending on current market situation and You dont have any control over coins You mined.
BUT it is almost set and forget build so for someone it could make a job.
Depending on number of Your 1080ti's You could see payments from 4h to once a week ^^
3. How can You squeeze more:
Personally I'd recommend some POS coins to run (but need of remote control over rig implicates some vulnerability for running wallet at same machine), like 808, Bitbean, Orbit, Solaris(yea).
Next if You have free disk space (more than 10 gb) set it for Storj share, it'll bring you few bucks a month, but will add up. For larger disk space (like 1TB+) set some of it for Storj and rest for Burst mining. When Your Storj get full lower Burst file and so on.

Hardware:
MSI Z270A-Pro
4 GB Ram
2TB HDD
G4400 CPU
1x 750W B+ PSU
1x 850 W B+ EVGA PSU
3x MSI  Gaming X
1x Zotac Amp Extreme Core
1x Asus ROG Strix
5x Powered Risers
Software:
-Clean, activated Win10
-All updates from Win update
-Latest drivers form MSI website (chipset)
-Latest Nvidia drivers
-Latest ccminer from Tpruvot
- MSI Afterburner (to limit cards powerdraw)
The algo I was trying was bitcore and skein. I've limited TDP to 75% in MA, so I've assumed that it'll have enough power.
Do someone have Zotac and can share how much these beast draw at 75% tdp?
My config for psu's.
Weaker PSU got two cards (MSI), their risers, mobo, cpu and hdd. It's working fine (that config was working before).
Now I want another psu (850W) to power 3 cards and their risers.
And it's kind working. But not for mining

Well I didn't enabled anything in bios before windows setup but I've made bootable usb with Rufus, GPT partitioning for UEFI systems, so I assumed that it'll for sure be UEFI.
Only thing I've changed in bios was 4g Enable, because it was disabled by default, and 3 of my cards was with yellow triangle in device manager, switching 4G solved it, but during some boots not all cards are again found by OS, and they appear as Unknown VGA Device on Unknown Device's list.
Really don't know what I've messed up. Maybe PSU draw offset is too low? It's 1600W, even when counting efficiency on 100% load it should be minimum 1350W (85%).  Dont know how much Zotac and Asus draws at 75% tdp but MSI was ~210w on skein/ea so I've just distributed them 2 on one psu with mobo and cpu, and 3 on other alone.

Someone got 5+gpu rig running on MSI Z270A-PRO ?
I've got problem today, after adding 3 more cards to rig (from 2 to 5).
Everything seems ok, mobo see all cards with 4G enabled, but...
When I start ccminer, everything is good until miner thread are enabled.
Then after few sec one RANDOM card (of three connected to PSU just for cards), goes WOOF! (100% fan) and BSOD TDR Error happens.
I've checked every connection, checked cards, risers, psu's.
Everything is working great when there are only 2 cards connected... I'm running cards with 75% tdp to keep them and psu's cool...
On one PSU (750w b+) i've got 2x MSI Gaming X (working good) on another (850w b+) I've got 1xMSI Gaming X, 1xZotac Amp! Extreme Core and 1x Asus ROG Strix Gaming.
Mining with any configuration with 2 cards works. Sometimes Zotac wont start at boot (like driver problems it's red led, then after booting into Windows it starts flashing blue). I've recent Nvidia drivers installed, clean windows 10 UEFI installation.
Any advices what went wrong?

I hope this would help You You WILL get paid, on LAST payout today.

If you can aim at 700-850w psu in good price. It let you expand to 3 cards (if 850, when down on tdp), take modular one! Those extra 15-30$ really worth mess-less build. From my personal experience EVGA is one of the best. Also buy gold and higher for mining. As You'll be using power 24/day those few percent efficiency will really add up.

It's depending on psu. On evga 850w gold I'm using 800w from it. But my XFX TF 750w start aircraft engine when it's load goes up 600w.
It's psu thing, with modern platinum rated psu you could use nearly 100% of it.