I currently have 10 of the original R-Boxes running on cgminer. I'm adding 2 of the new 110 GH+ r boxes as well. Is there a way to set a frequency for the original R boxes and a different one for the new ones?
Thanks.
The easiest thing to do is run the new R-box ver2 on a second instance of cgminer, they will run side by side without any problems and if you need to make changes to the new ones like usual with new equipment, then you won't have to shutdown everything to do it. There won't be a problem each of them trying to detect and run them all? |
|
|
|
I have 10 of the original r-boxes and 2 of the new ones. Is there a way to get BFGMiner to run them all together, but set one frequency for the original ones and another for the new ones?
Thanks.
The --set parameter can be used to target specific devices by path or serial number: --set rkm@/some/path:clock=XYZ
--set rkm@serial123:clock=ABC If I understand correctly, the R-boxes generally have the same serial number, so this line would only have to be used signally? --set rkm@serial123:clock=ABC Hopefully the new R-boxes will have a different serial. Sorry, kind of new at digging this deep into them. If the devices have the same serial number (IOW manufacturer did not set proper information), you would either need to use the device path instead or use a tool to program a serial number on the device(s). For CP210x-based devices the following tool is relatively painless: http://cp210x-program.sourceforge.netCould I leave my current setup for the frequency on the older r-boxes and then use the serial frequency command on just the 2 new r-boxes? |
|
|
|
I have 10 of the original r-boxes and 2 of the new ones. Is there a way to get BFGMiner to run them all together, but set one frequency for the original ones and another for the new ones?
Thanks.
The --set parameter can be used to target specific devices by path or serial number: --set rkm@/some/path:clock=XYZ
--set rkm@serial123:clock=ABC If I understand correctly, the R-boxes renerally have the same serial number, so this line would only have to be used signally? --set rkm@serial123:clock=ABC Hopefully the new R-boxes will have a different serial. Sorry, kind of new at digging this deep into them. |
|
|
|
|
I currently have 10 of the original R-Boxes running on cgminer. I'm adding 2 of the new 110 GH+ r boxes as well. Is there a way to set a frequency for the original R boxes and a different one for the new ones?
Thanks.
|
|
|
|
|
I have 10 of the original r-boxes and 2 of the new ones. Is there a way to get BFGMiner to run them all together, but set one frequency for the original ones and another for the new ones?
Thanks.
|
|
|
|
|
It's a longshot, but post the BTC address. Might be able to trace the transfers in and out and match to an address someone else is using or has used.
|
|
|
|
to Ntrain2k
Unfortunately when i unplug it pc gives me unrecognised hardware error and bfgminer declares dead. thanks anyway
Have you tried swapping cables and/or power source? Does it work ok with older versions? |
|
|
|
Hi, all
i have problem with my zeus hurricane X3 which worked for a while without a hitch but now i get a problem as below.
[2014-09-22 14:34:38] Started bfgminer 4.8.0
[2014-09-22 14:34:38] Found ZUS 0aa at \\.\COM3
[2014-09-22 14:34:38] Probing for an alive pool
[2014-09-22 14:34:38] Testing pool stratum+tcp://us-east.multipool.us:3355
[2014-09-22 14:34:38] HTTP request failed: Protocol stratum+tcp not supported or disabled in libcurl
[2014-09-22 14:34:39] Stratum authorisation success for pool 0
[2014-09-22 14:34:39] Pool 0 stratum+tcp://us-east.multipool.us:3355 alive
[2014-09-22 14:34:39] Pool 0 is hiding block contents from us
[2014-09-22 14:34:39] Network difficulty changed to 69 (498.2Mh)
[2014-09-22 14:34:39] New block: ...bd9baea5 #229261 diff 69 (498.2Mh)
[2014-09-22 14:34:39] Stratum from pool 0 detected new block
[2014-09-22 14:34:39] ZUS 0: Opened \\.\COM3
[2014-09-22 14:34:44] ZUS 0aa: Comms error (werr=1)
[2014-09-22 14:34:44] ZUS 0aa: Failed to reopen on \\.\COM3
[2014-09-22 14:34:44] ZUS 0aa failure, attempting to reinitialize
[2014-09-22 14:34:44] ZUS 0aa: Failed to reopen on \\.\COM3
[2014-09-22 14:34:44] ZUS 0aa failure, disabling!
[2014-09-22 14:34:44] ZUS 0aa being disabled
Anyone can kindly comment what it is as i got no clue? Thank you
NOTE: my .bat file as below
bfgminer --scrypt -o stratum+tcp://us-east.multipool.us:3355 -u x -p x --scan noauto -S zeusminer:\\.\COM3 -d zeusminer@\\.\COM3 --set zeusminer:chips=64 --set zeusminer:clock=300 --set zeusminer:ignore_golden_nonce=1
I had one Zeus/GAW miner that would lose the USB connection at random times and it would give those errors. When I unplugged the USB cable from the miner side and replugged it would take back off. |
|
|
|
|
eBay is your friend.
I've bought blades recently for less than what you are asking.
|
|
|
|
You can get 10 Gridseeds with PSU and cables on E-Bay right now for about $110. Gridseeds are barely cost effective to ship at this point.  Exactly. I gave him an offer that would have covered shipping plus extra. His reply was LOL. Told him if he wants anything close to what he's asking he is better off to go to eBay with it because no one here is going to buy for his price. |
|
|
|
I'll buy if you can match 9mm-btc's price from last week.
I am not sure what you are talking about. He was selling them for $50 each. |
|
|
|
Luke, i recently tried upgrading from 4.2 to 4.8. I have been using 4.2 fine with CGWatcher, but when i go to use 4.8 with CGWatcher, it closes in scrypt mode. running the command without CGWatcher works fine. what command can i run to create a log file to see why it closes?
im not sure exactly what is causing the program to close itself, because i have 4.8 running in sha256 mode fine, and the same command in 4.2 works for my scrypt miners
thanks!
I had this problem with 4.3 and up a while back. Give this a shot: https://bitcointalk.org/index.php?topic=185553.msg7607210#msg7607210 |
|
|
|
Bump
I have them for sale. $62.50 including priority USPS domestic shipping. You pay any escrow fees. USB cable and barrel connector are included. Power brick can be added for $10 each. I use coinbase.com for USD to BTC conversion. Alternatively you can purchase from my eBay store. I have 99.7% positive feedback. Over 400. http://m.ebay.com/seller?itemId=261595341849&sid=joshua8gEdit for auto correct on spelling. Yea, sorry, not paying EBay prices for them.  |
|
|
|
Guessing this is vapour?
750 Ghs at only 70 watts?!
Lol
Not mine, but I read it to be more along the lines of 525 watts. .70 Watt per GH |
|
|
|
|
Anyone else have any?
Thanks
|
|
|
|
Is there a way to get BFGminer to not recognize or try to use my video card while mining?
Thanks.
add this to the command used to launch bfgminer
-S noauto
Tried both of those and BFG just opens and closes immediately. Here is my current bat: C:\Users\Main\Desktop\bfgminer-4.7.0\bfgminer.exe --scrypt -S gridseed:all --set-device gridseed:clock=830 -o stratum+tcp://us-east.multipool.us:7777 -u X -p x --no-submit-stale paste this into notepad. Save as.. mine.bat this will run bfgminer with the flags we mentioned and then pause for keyboard input, letting you see why it doesn't start up (like it should) C:\Users\Main\Desktop\bfgminer-4.7.0\bfgminer.exe --scrypt -S noauto -S gridseed:all --set-device gridseed:clock=830 -o stratum+tcp://us-east.multipool.us:7777 -u X -p x --no-submit-stale pauseYou are the man! I wasn't putting the -S in front of gridseed also, so it was -S noauto gridseed:all |
|
|
|
Is there a way to get BFGminer to not recognize or try to use my video card while mining?
Thanks.
add this to the command used to launch bfgminer
-S noauto
Tried both of those and BFG just opens and closes immediately. Here is my current bat: C:\Users\Main\Desktop\bfgminer-4.7.0\bfgminer.exe --scrypt -S gridseed:all --set-device gridseed:clock=830 -o stratum+tcp://us-east.multipool.us:7777 -u X -p x --no-submit-stale |
|
|
|
|
Is there a way to get BFGminer to not recognize or try to use my video card while mining?
Thanks.
|
|
|
|
|
Show Posts
