thanks. Moreover i would like to make a faucet for the coin. I know you already have it but i want to make my own can you help me that too.
You can use our Faucet. It's all Open source code: https://github.com/qwertycoin-org/qwertycoin-faucet in our Github Repository. Just fork it and adapt it by your Settings.
|
|
|
What is the maximum amount of QWC that is possible to send with one transaction from GUI wallet? I sent 25k then tried to send 25k again but got "Transaction amount too big" then I sent 24k and it went through.
The Transactions can be easily 1 Million per Transction. But Currently not. This is the primary Reason for our 60,000 Block Goal. The Transaction size is not limited, but limited to blocksize and today the Blocksize is a little small for a huge Transaction. After Block 60,000 was mined the Blocksize will Increase by factor 100. With smaller Blocksize the Blockchain will be faster, smaller and of course larger in less time. This gives the network Time to grow, time to create more Nodes to grow up a stable, larger, greater Network of QWC. After Block 60,000 the Network is ready for mass adoption and for every Exchange. Every User can send a tons of QWC to everyone. Our Pool pay 40k each Transaction and about 10 Transactions per minute. This Setting works pretty good. Transaction will confirmed in under one minute. Transactions in under 3 Seconds. So at first try with smaller amounts like 40k and mixint count 0 Simple wallet and linux files not working. Moreover i sent an email about 3 days ago still no reply
Write here and don't send an email when you have a problem. What is wrong with your Daemon / Simplewallet? More Informations please. https://qwertycoin.org/get/cli/latest/linuxI downloaded this from your site but non of the files in there which are executable run in linux. Does not give any error and does not give any prompt just stays there as if i has not even touched those. So simple is that the wallet and files for linux does not work. Can you guide me onto it. Simple wallet is an executable file within the said folder which i wanted to use for putting it up on my website but this does not work Dou you have set executable rights to this files? Alternative: Build / compile it by yourself: Just clone the git repository and compile it by yourself. That's it git clone https://github.com/qwertycoin-org/qwertycoin.git cd qwertycoin mkdir build && cd build cmake .. && make
|
|
|
I would like to know how to transfer the balance of the paper wallet to the wallet of the PC? I would like a translation of Wallet PC in Portuguese Brazil, Thank you ... sorry if I do not understand, I'm using google translate
Hi, Just download your Desktop Wallet here and unzip it to your favourite folder. Go to this folder start ./Qwertycoin or Qwertycoin.exe. Once you open Qwertycoin Wallet, it will automatically create your first Qwertycoin address and start synchronizing with the network. Now you can go to “File > Open Wallet” navigate to your existing Walletfolder and open your name.wallet File. That’s it. Or use this Tutorial: https://qwertycoin.org/blog/2018/02/import-paperwallet-desktop-wallet/
|
|
|
Simple wallet and linux files not working. Moreover i sent an email about 3 days ago still no reply
Write here and don't send an email when you have a problem. What is wrong with your Daemon / Simplewallet? More Informations please.
|
|
|
Hi, i can't see your Javanese Post? The topic or board you are looking for appears to be either missing or off limits to you.
And we're already have a Spanish Version: https://bitcointalk.org/index.php?topic=3060831.0Hi, i can't see your Italian Post? The topic or board you are looking for appears to be either missing or off limits to you.
|
|
|
Hello, I installed the new GuiWallet windows64, it is working but when it start I have an error:
Update can not be verified Error: Socket operation timed out
I press OK & everything seems to be fine.
Hi, this is a minor Bug in checking for Updates through SSL Connection. In Further Version we will fix this issue. But nothing to be Worry =) If a new Wallet is Released your Desktop Wallet would not inform you about that. But i think you will read some News about further Versions so no problem at the moment with this Bug. Looks very promising, hope it succeds!
Hi and thanks! We hope too and working hard on this Project.
|
|
|
We fixed the Issue with Windows 32-Bit Version! You can download this Version on our Download page here is a directlink: https://qwertycoin.org/get/gui/latest/windows32It is build with 32 Bit Settings but currently not tested on a Win 32-Bit Productive Environment. So if anyone can test this Version would be fantastic.
|
|
|
Sir, it did not solve the problem. Here is the log file:
2018-Mar-04 17:49:28.145900 INFO [Blockchain] Loading blockchain... 2018-Mar-04 17:49:28.148940 WARNING [Blockchain] No actual blockchain cache found, rebuilding internal structures... 2018-Mar-04 17:49:28.149953 INFO [Blockchain] Height 0 of 21400 2018-Mar-04 17:49:28.312592 INFO [Blockchain] Height 1000 of 21400 [..] 2018-Mar-04 17:50:03.494581 INFO [Blockchain] Rebuilding blockchain indices took: 15.9999 2018-Mar-04 17:50:03.495088 INFO [Blockchain] Blockchain initialized. last block: 21399, d4.h17.m43.s18 time ago, current difficulty: 109141029 2018-Mar-04 17:50:03.565007 INFO [node_server] Generated new peer ID: 800518071840663127 2018-Mar-04 17:50:03.565514 INFO [node_server] Network: 6681dec9-04b5-5f03-b88f-973b1a70b2af 2018-Mar-04 17:50:03.566020 INFO [node_server] Binding on 0.0.0.0:8196 2018-Mar-04 17:50:03.566528 INFO [node_server] Net service binded on 0.0.0.0:8196 2018-Mar-04 17:50:03.567035 INFO [node_server] Attempting to add IGD port mapping. 2018-Mar-04 17:50:04.640164 INFO [node_server] Added IGD port mapping. 2018-Mar-04 17:50:04.641178 INFO [node_server] Starting node_server
Your Wallet is not synchronized. Hi,
I can not send you a message can you please let me know how can I reach you for some discussion in private
Hi, you can send us a email here: https://qwertycoin.org/contacts/ or use Discord and/or Telegram
|
|
|
Version 1.3.0 on Windows 10. It worked one time and after I did someting with the node it never worked again. I've deleted the .cfg file but that dit not work.
When I start the program I just see the black introscreen and bottom left "loading blockchain" but after approximately 5 seconds it crashes.
Than you had crash the Walletconfig by yourself. Delete all Files except qwertycoinwallet.wallet and download a new Version of Destop Wallet Client. After this you can download a copy of Blockchain to sync faster: https://blockchain.qwertycoin.org/
|
|
|
That did not help unfortunately.
We can't help you, when you dont give us any further Informations about your Error1) Which Version do you use? 2) Which Operation System do you use 3) What have you done? 4) Have it works in the past?
|
|
|
My wallet crashes within a few seconds after startup. I've tried modifying the .cfg file but I can't get it to run.
Any sugestions?
Make a paper wallet at https://paperwallet.qwertycoin.org/ Yes, but I would like to run the GUI wallet. All my other wallets function well except QWERTY GUI wallet. Delete the .cfg File in your ~/qwertycoin/ Folder
|
|
|
Hi, I've got a stange issue with OSX desktop wallet.
I'm not able to run it. I have MacBook Pro Hight Sierra 10.13.3.
[..]
Hi, your Computer is missing the QT libs Library not loaded: /usr/local/opt/qt/lib/QtPrintSupport.framework/Versions/5/QtPrintSupport You can install it on yourself after this the Desktop Wallet should working fine.
|
|
|
´ Thank you, you were paid Hi, I've got a stange issue with OSX desktop wallet. I'm not able to run it. I have MacBook Pro Hight Sierra 10.13.3. http://nsa39.casimages.com/img/2018/03/04/180304013750807818.pngIs someone has the same issue? And how to solve it? Thank you for your help NB : I have no pbm with others crypto desktop wallet. check with a developer that Qwertycoin is working with this version of macOS. You may need to reinstall the application. Make sure to install all available updates for the application and mac OS. Click on Report to get more details and send a report to Apple more détail : [...] Hi and thanks we will take a look and send you an reply if we have a Update, Fix or a Workaround. Translations175,000 QWC for a fully Translation of Initial Posting (Post #1) of our ANN: https://bitcointalk.org/index.php?topic=2881418.msg29612199#msg29612199You can use this formatted https://qwertycoin.org/files/btt_thread-source.txt Version of our Post. This save a lot of time during formatting Text Needed Translations:- Hindi
- Arabic
- Bengali
- Japanese
- Punjabi / Lahnda
- Javanese
- Telugu
- Marathi
- Tamil
- Vietnamese
- Urdu
- Italian
- Polish
Reserverd Postings Also: Add a Link to official ANN likeOfficial Discussion: https://bitcointalk.org/index.php?topic=2881418.0Pick your language, write here your Reserve start Translatiing and after this post the Link and give us your QWC Address
|
|
|
Hi, can you translate this Error to english please? So we can help you faster with ways to solve this Problem with you. Thank you
|
|
|
Dev, you need donation BTC, ETH,XMR?
i think this founder and developers it very poor i believe, this shit coin doesnt grow up for begin in exchange this shit coin, 0.0000001 SATHOSI because, we know they developer and founders its very POOR 0.0000001 SATHOSI in 2018 year and dev, need DONATION ETH, BTC, XMR Read ANN carefully. donations is for bring Qwerty to Exchanges before Block 60,000. If you do not like this project, it's just your opinion that I understand and no one says you must use QWC, mine QWC, contribute with QWC or donate some other Coins to QWC.
|
|
|
Update:Thanks for the first 42.3 ETN to our Donating Address =)
Hey Guys, our Telegram Community came to the idea to start an Crowdfunding / Crowdmining for bring Qwertycoin to the Exchanges faster. The most Exchanges have a high Fee for Listing any Coins there: Cryptopia: 12.8 BTC* Yobit: Minimum 0.1 BTC (Max 0.5 BTC) Cryptohub: Minimum of 0.0402 BTC* And many others with similar fees Note: All these Fees a calculated on current Marketprices* Our Plan is to bring QWC to the Markets after Block Height 60,000. Many QWC Owners (Specially in Telegram Channel) want Exchanges much sooner, so we maybe need this Crowdfunding or Crowdmining to pay this Exchanges Fees to bring QWC to the markets. What can you do now?- You can donate BTC, XMR, ETN or anything else to our Funding Wallets
- You have a GPU Rig? Or some CPU Cores available? And wanna spend some Hashingpower to mine some of these Coins?
Than you can start your Miner and earn some of these Coins with our Publicaddress.
All of these Earnings (except Bitcoin) will be exchanged to Bitcoin. With this BTC we can pay the Fees for Exchanges like: Yobit, Cryptohub, Cryptopia or any other Exchange Platform. This is not a ICO or somethin else! If you have some Hashingpower available, or some Coins you wanna donate, than feel free to support Qwertycoins Mission and help us and our Community to grow up faster and faster. Qwertycoin is made from Cryptofans for, and with Cryptofans. We stay in close contact to our Community here on BTT, as on any other Social Media (especially on Telegram) All Transactions will be posted here in Bitcointalk Thread so everyone can check all Transactions and current Wallet Balances. Donate Addresses:BTC: 1DkocMNiqFkbjhCmG4sg9zYQbi4YuguFWw ETH: 0xA660Fb28C06542258bd740973c17F2632dff2517 BCH (Bitcoin Cash) qz975ndvcechzywtz59xpkt2hhdzkzt3vvt8762yk9 XMR: 47gmN4GMQ17Veur5YEpru7eCQc5A65DaWUThZa9z9bP6jNMYXPKAyjDcAW4RzNYbRChEwnKu1H3qt9FPW9CnpwZgNscKawX ETN: etnkJXJFqiH9FCt6Gq2HWHPeY92YFsmvKX7qaysvnV11M796Xmovo2nSu6EUCMnniqRqAhKX9AQp31GbG3M2DiVM3qRDSQ5Vwq In addition:If you know any other exchanges on which you would like to trade QWC, let us know. Please leave a comment with the name of the Exchange. Ideally, you give us the link how to enter a coin there. It would be nice if you could also specify how high the listing fee is there. Join our Telegram Channel to get the closest Contact: https://t.me/qwertycoin
|
|
|
Which is the monthly reward for masternode?
Nothing, it depends on your Activity. You earn the fees from Users which use your "Masternode" as their Remote Daemon to use the Desktop Wallet as a Lightwallet. You earn 0.25% of every Transaction Users send or receive through your Wallet. My wallet crashes within a few seconds after startup. I've tried modifying the .cfg file but I can't get it to run.
Any sugestions?
Which Version, which OS do you use? We can't help you when you dont give any further Informations. Delete the .cfg and start new
|
|
|
|