|
How about neoscrypt for the algo? thx
|
|
|
|
The best block explorer there is....good job. And not just for DIME coin.
|
|
|
|
These are the best nodes. Good job.
|
|
|
|
Hello, Ive been trying to mine with the following commandline: setx GPU_MAX_ALLOC_PERCENT 100 ethminer -U -F http://eth-mine.suprnova.cc:3000/USMiningRentals.gtx1/50I've also tried with the -G instead of -U Im running 6x 750ti. I can mine for days and see 'mining on powhash' and even hashrate, but the pool always shows 0 speed and winnings. Thanks, 750ti cards won't mine this anymore. Also look at my post # 501. But did you try --farm-recheck 300 |
|
|
|
Sp-mod decred private 1 is doing 600mhash @1405 core. (750ti)1.7.4 opensource is doing 550 on the same card and clock. Both compiled with cuda 7.5.
Only 0.1 btc guys
Sp what do you get at 1345 oc ? I may contribute to your release. |
|
|
|
Sp-mod decred private 1 is doing 600mhash @1405 core. 1.7.4 opensource is doing 550 on the same card and clock. Both compiled with cuda 7.5.
Only 0.1 btc guys
I get 1405 Mh/s per 970 and 495 Mh/s per 750 Ti with 1.7.4 with OC. I have no idea how others get 550. If I was mining Decred I might buy it but I'm not. Eth is much more profitable and uses about 15-20% less electricity. bathrobehero Try 64x not 86x you should get 512 mh/s. Thanks, tried that and I figured it out that I can get close to 500 Mh/s (still not over, with OC) if I only run 1 card. With more cards I assume I run into some kind of CPU bottleneck with a dualcore pentium even though it's only at about 27%. Funny because I get ~ 515 per card oc to 1345 and have the same type of cpu...running a 6 750ti rig. I forgot.... add this --cpu-priority 3 if I go to --cpu-priority 5 I can't connect to my rig. I'm getting 3,100 mh/s total. |
|
|
|
how to mine with two card on ethereum? -d 0 1 not working, -t not working either
ethminer.exe --farm-recheck 300 -U -F http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --cuda-devices 0 1 Wait for the dag file to be created. So it's --cuda-devices 0 1 Isn't that farm-recheck value a bit too high? 3 seconds is quite a lot when average block time is 16-17 secs. I have no idea antantti  What should it be? thx I think it defaults to 500 if you don't specify value at all. Pools quite often recommend 100-200 values for their mining proxies. Thx I changed it to --farm-recheck 300 works better. |
|
|
|
Sp-mod decred private 1 is doing 600mhash @1405 core. 1.7.4 opensource is doing 550 on the same card and clock. Both compiled with cuda 7.5.
Only 0.1 btc guys
I get 1405 Mh/s per 970 and 495 Mh/s per 750 Ti with 1.7.4 with OC. I have no idea how others get 550. If I was mining Decred I might buy it but I'm not. Eth is much more profitable and uses about 15-20% less electricity. bathrobehero Try 64x not 86x you should get 512 mh/s. |
|
|
|
how to mine with two card on ethereum? -d 0 1 not working, -t not working either
ethminer.exe --farm-recheck 300 -U -F http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --cuda-devices 0 1 Wait for the dag file to be created. So it's --cuda-devices 0 1 Isn't that farm-recheck value a bit too high? 3 seconds is quite a lot when average block time is 16-17 secs. I have no idea antantti What should it be? thx EDIT: change it to 300. |
|
|
|
i have two 970 now, all good, planning to buy another one and then dunno waiting for roi first before adding others, not much money lol
pascal is coming i know but i can always resell easily those 970, gamers love them, and they are all g1 gaming best brand
this means that i only need to roi on the difference between the original price and the resell price, easy profit lol
Exactly Vaccomondus....  Do you know when pascal will be released ? |
|
|
|
Exclude the 750ti cards. only compute 5.2 cards will work.
Yes I just noticed that  It should be --cuda-devices 0 2 not --cuda-devices 0 1 for device 2 is my 2nd 980ti. Thx sp EDIT: Working good...... |
|
|
|
it work good, tnx
Mine crashed after 2 minutes... opening again  |
|
|
|
how to mine with two card on ethereum? -d 0 1 not working, -t not working either
ethminer.exe --farm-recheck 3000 -U -F http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --cuda-devices 0 1 Wait for the dag file to be created. So it's --cuda-devices 0 1 |
|
|
|
how to mine with two card on ethereum? -d 0 1 not working, -t not working either
--cuda-devices 0 1 or --cuda-device 0 1 I don't remember the exact syntax. Yes......... thank you sp A working bat file for windows 8.1 with 2 cards. ethminer.exe --farm-recheck 3000 -U -F http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --cuda-devices 0 1 |
|
|
|
Giving it a try thank you sp EDIT: doesn't work opens then closes instantly. This works for one card....... but adding --opencl-device 1 to that won't work either. ethminer.exe --farm-recheck 3000 -U -F http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --opencl-device 0 |
|
|
|
A working bat file for windows 8.1 with 2 cards. ethminer.exe --farm-recheck 300 -U -F http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --cuda-devices 0 1 Or in my case --cuda-devices 0 2 because device 1 is a 750ti not a 980ti. And 750ti won't mine this anymore. |
|
|
|
|
Thank you
That didn't work either.
Could someone please show me their bat file for 2 cards on one rig with windows 8.1 please.
Thx
|
|
|
|
How do I get ethereum miner to recognize 2 cards on the same computer ?... it only mines one of 2 cards .nvidia 980ti at 22 mh/s. It should have -d 0,1 but doesn't work..like cuda should. Thx EDIT: This my bat file that doesn't work ethminer.exe --farm-recheck 3000 -o http://eth-us.suprnova.cc:3001/razorsedge.eth1/22On the donation bat file I get 1 card 980ti that gives 22 mh/s...but this bat file above doesn't work. Please help. thx EDIT: I have ethminer.exe --farm-recheck 3000 -U -F http://eth-us.suprnova.cc:3001/razorsedge.eth1/22 --opencl-platform 1 Working with one card. I have 2 750ti too on the rig. Still won't mine with the other 980ti card...... you need to remove the "," to make this work, apparently it was removed in the last version? Do you mean -d 0,1 is wrong? ...... so should be -d 0 -d 1 ? This doesn't work either --opencl-device 0 --opencl-device 1 doesn't work either. Could you please show me you bat file for 2 cards on one rig with windows 8.1 please. |
|
|
|
|
Show Posts
