How much days left to end mining?
about 10 days if i'm not mistaken What do you think after the POW phase , what will happen with the price? hard to say, we are leading to 30+, but honestly i don't think it will rise to 100k+
|
|
|
Just purchased an Asus GeForce 750ti as a test mule and to wet my feet with Nvidia. There's not as much info for setup with these cards as much as the amd cards. Can someone point me in the direction for setting up these cards with the newest ccminer? Thanks for the help guys, looking forward to tinkering with these bad boys
great site with all the infos you need http://cudamining.cc/url/releases
|
|
|
How much days left to end mining?
about 10 days if i'm not mistaken
|
|
|
Guys, the power supply to cards is not the limiting factor of their performance in almost all cases with the 750s. You will run in to stability issues first, judging by most peoples' experience. You would also have to mod the BIOS to raise TDP. Remember that for a lot of people the cost of power will end up offsetting any tiny gain you get. Look at cryptomining blog and elsewhere, they have tested this. You are better off getting something like a palit dual x which doesn't have the 6pin and performs better clock wise than almost any other card, even at stock.
you can't rise the power limit with msi?
|
|
|
i have 5m commcoins, and i am still waiting it pumps
same 5M waiting without whales that throw plenty of btc, you can't rise the price ever they are the resaon for doge, aurora, blackcoin, darkcoin, and the recent dark clone pump
|
|
|
Many has reported getting 2.5 MH/s from R9 280X, but I'll get only half of that. And g2 i 18 should be everything it requires. Boohoo, what's wrong?
kernel x13mod right? I tried that too, but it gives 100% reject rate. "Share above target". it should work only with that kernel, you have the last version? I certainly thought so, but I'm not so sure anymore. There's no "x13mod" at kernel directory. https://bitcointalk.org/index.php?topic=475795.0I downloaded upmost there. you should DL this, that was the old version not optimized https://bitcointalk.org/index.php?topic=623409.0
|
|
|
24k on Poloniex
so i was right after all my quote Bost is a cheap buy now.. Soon 20k+ 30k+...
+1.. hoping for 100k + this would be a marketcap after pow about 12.580.000 Dollar. This will never happen, because there a no new features only X13 imo the pirce will drop soon under 5000 satoshi price will go to 24k, i predicted it your argument is invalid Many has reported getting 2.5 MH/s from R9 280X, but I'll get only half of that. And g2 i 18 should be everything it requires. Boohoo, what's wrong?
kernel x13mod right? I tried that too, but it gives 100% reject rate. "Share above target". it should work only with that kernel, you have the last version?
|
|
|
Many has reported getting 2.5 MH/s from R9 280X, but I'll get only half of that. And g2 i 18 should be everything it requires. Boohoo, what's wrong?
kernel x13mod right?
|
|
|
bittrex stil at 18k, wtf
you should buy some votes to reach mintpal now while is hot
use the premine
|
|
|
buy a 6 x 750ti rig , instamine the shit out of the crap out there and point it at jackpotcoin, which give you 0.02 a day or other coin that give you 0.015, there something between x11 clone
|
|
|
I'm looking at picking up a few 750ti's. Any recommendat ion on the brand? There's about a $30aud difference between them. Any hash rate increase over one or the other?
gigabyte 2 gb version non oc are ok, imho oc is overprice, you can oc your cards for free no need to waste money on this
|
|
|
I am getting Failed to init GPU thread 0. I have an Nvidia 780Ti in my top slot and I have a Radeon 5850 in the bottom one. I am trying to run this on the 5850. I have ran X11 no problem on it but this doesn't work.
Thanks, Griff
this is what I am getting [14:20:59] Kernel marucoin is experimental. [14:20:59] Unable to open marucoin.cl or ./kernel/marucoin.cl for reading [14:20:59] Failed to init GPU thread 0, disabling device 0 [14:20:59] Restarting the GPU from the menu will not fix this. [14:20:59] Try restarting sgminer. Press enter to continue: it seems that the kernel marucoin, isn't present in the kernel folder
|
|
|
What is your conf for r9 290 Tri-x for x13 ? I achieve only 2,5Mh/s . Thank you .
try -g 1 -I 20, nothing else, 290 should work at 3.1 MH/s in theory
|
|
|
the only logical explanation is that old fpga that used to mine btc, long time ago, are being re-programmed to mine x11
chinese won't come here and tell you this, they don't fucking care, therefore you can't get any proof
|
|
|
so experts why should i mine any x13 coin when it seems to be a step backwards from x11 in terms of power usage ?
from my calculations my miners use at least 20% more power on X13 vs X11 , the whole reason i moved to X11 from Nscrypt
(even through Nscrypt is more profitable in the short term) is to save power.
My compsumption is 50-70W less than X11 on 4x 280x rig e: What hashrate are you getting on r9 280x? I have 1.25 Mh/s 2.5MH/s you should dl the new miner for x13/x11
|
|
|
it's funny because they ask what this coin offers but then they mine darkcoin clone
everyone here protects his bag ,we know..., you can gtfo now
but there are things that i don't like about this coin, the 1% premine and 15 coin per block which at the end of the pow will be another "1% premine", i hope mammix2 use this to improve his coin(like adding anon) and not dumping
|
|
|
wallet is slow on closing, and there are some errors
|
|
|
not fair that this is already on exchange while there is still the second list coming
|
|
|
|