Ok something is obviously wrong with SMOS after 1098 update, my cards hangs randomly, they drop to 0MH/s and then rig restarts. This never happend to me before, Tyt can you please take a look at this issue? from what I can see I am not the only one struggling with SMOS stability issues after patch 1098. Thanks.
In my case, I have a theory ... I have 2 diferents memory values in my rig for diferent cards. What I believe is hapening, its if the system is rebooted for any cause, the gpu order is mixed, and the wrong memory clock are applied. That causes fails on different VGAs ... For final test, I get all the cards for the lower memory clock and now I'm waiting to see whats going to hapen. Any sugestion? It's working for 15hrs, I'm losing 4mhs with this configs, but at least it's running without problems. note I posted lower settings for eth above they may help stability |
|
|
|
hello i haved started to use smos sice yesterday but i have a problem: one gpu of six is not the same as you can see below
ETH: 06/15/17-14:19:48 - SHARE FOUND - (GPU 5)
ETH: Share accepted (57 ms)!
GPU0 t=39C fan=87%, GPU1 t=56C fan=87%, GPU2 t=45C fan=87%, GPU3 t=50C fan=87%, GPU4 t=50C fan=87%, GPU5 t=53C fan=87%
ETH: 06/15/17-14:20:29 - SHARE FOUND - (GPU 0)
ETH: Share accepted (55 ms)!
GPU0 t=39C fan=87%, GPU1 t=57C fan=87%, GPU2 t=52C fan=87%, GPU3 t=55C fan=87%, GPU4 t=57C fan=87%, GPU5 t=60C fan=87%
ETH: 06/15/17-14:20:46 - SHARE FOUND - (GPU 3)
ETH: Share accepted (55 ms)!
ETH: 06/15/17-14:20:47 - New job from ubq.pool.sexy:9009
ETH - Total Speed: 121.811 Mh/s, Total Shares: 35, Rejected: 0, Time: 00:13
ETH: GPU0 15.120 Mh/s, GPU1 21.349 Mh/s, GPU2 21.346 Mh/s, GPU3 21.322 Mh/s, GPU4 21.328 Mh/s, GPU5 21.346 Mh/s
ETH: 06/15/17-14:20:49 - SHARE FOUND - (GPU 3)
ETH: Share accepted (54 ms)!
GPU0 t=39C fan=87%, GPU1 t=56C fan=87%, GPU2 t=51C fan=87%, GPU3 t=54C fan=87%, GPU4 t=58C fan=87%, GPU5 t=59C fan=87%
ETH: 06/15/17-14:21:20 - SHARE FOUND - (GPU 3)
ETH: Share accepted (53 ms)!
GPU0 t=40C fan=87%, GPU1 t=56C fan=87%, GPU2 t=51C fan=87%, GPU3 t=56C fan=87%, GPU4 t=57C fan=87%, GPU5 t=60C fan=87%
ETH: 06/15/17-14:21:55 - New job from ubq.pool.sexy:9009
ETH - Total Speed: 41.333 Mh/s, Total Shares: 37, Rejected: 0, Time: 00:14
ETH: GPU0 3.851 Mh/s, GPU1 21.354 Mh/s, GPU2 4.049 Mh/s, GPU3 4.017 Mh/s, GPU4 4.049 Mh/s, GPU5 4.014 Mh/s
ETH: 06/15/17-14:21:58 - SHARE FOUND - (GPU 4)
ETH: Share accepted (97 ms)!
ETH: 06/15/17-14:22:07 - SHARE FOUND - (GPU 0)
ETH: Share accepted (71 ms)!
ETH: 06/15/17-14:22:16 - SHARE FOUND - (GPU 1)
ETH: Share accepted (56 ms)!
GPU0 t=40C fan=87%, GPU1 t=56C fan=87%, GPU2 t=51C fan=87%, GPU3 t=55C fan=87%, GPU4 t=57C fan=87%, GPU5 t=59C fan=87%
ETH: 06/15/17-14:22:20 - New job from ubq.pool.sexy:9009
ETH - Total Speed: 121.829 Mh/s, Total Shares: 40, Rejected: 0, Time: 00:14
ETH: GPU0 15.117 Mh/s, GPU1 21.338 Mh/s, GPU2 21.348 Mh/s, GPU3 21.335 Mh/s, GPU4 21.349 Mh/s, GPU5 21.342 Mh/s
why this?
and why i have 6 temperatura but only 5 freq in the main list?
Rig01 ON(48) 70.95 MH/s 0 H/s 38 56 45 54 56 54 ℃
87 87 87 87 87 87 % 1284 588 1284 588 1284 (4)
1750 1750 1750 1750 1750
i have msi z270-a pro
and rx570 4g pulse sapphire
tyvm!
it is f'd up give me a minute I will post some info go to overclock and load settings below  |
|
|
|
Need sone help getting my rig up and running, issues with internet really. I had Windows Server 2012 R2 on an ssd for a htpc build and it worked fine, so I literally just plugged it i to my new mining rig and hardlined the ethernet, nothing detected. Went to the Asus driver on another pc, thumb drived them over, wouldnt install said no intel adapter detected.. Going to just reinstall windows at rhis point.. cant find my windows 7 disc atm.. so here are my options Windows Embedded 8.1 Industry Pro with Update https://imagine.microsoft.com/en-us/Catalog/Product/82or Windows Server 2016 https://imagine.microsoft.com/en-us/Catalog/Product/524I am running the following ASUS z270 AR i3 6100 (2) ASUS 1080ti FE Only other thing I can think of is sucking it up and buying a Win 10 key.. but I think I will find my win 7 when I can clean out the pod in my front yard in 2 weeks. Any help is appreciated Pm a mailing address if in the USA I can mail a win 7 disc. Buy a key from ebay |
|
|
|
Happy to report the gigabyte 1070 itx build ran stable overnight. the bat is here: -epool stratum+tcp://us1.ethpool.org:3333 -ewal 0x3ef297e47404a771139472b93621f82c8a832857.Simple2 -epsw x -mport -3333 -esm 0 -allpools 1 -dbg -1 -wd 1 -r 1 -ethi 7 I set power in the core to 95 and watts for a 2 card rig are about 230 giving me 50.3 mh  |
|
|
|
Hi, I'm having a free electricity + laptop which can be replaced if it get's burned for free. My question is is it still profitable to mine with it using given above circumstances ? IT's Intel i5 laptop , without gpu, so only cpu mining is relevant. On my home pc I'm getting ~200 H/s with i7 CPU On laptop it gets to ~50 H/s with i5 CPU (Tried FCN and XMR mining). Let me know in comments below if mining in this scenario still unprofitable.  so with xmr it gives you around 10 pennies a day? so will you mine and hold? |
|
|
|
dang i didnt get that email for the 10% or i would take up on that purchase, my 2 @ 8% were cancelled the other day, because i ordered some on ebay and on newegg.com and because they were coming from the same company they cancelled my order on ebay out.. which kinda sucked..
nice price but btc is dropping a lot Do you think the bubble finally popped? No as I think BTC should be 1900-2300 not 2700-3000. I did pick up .33 btc yesterday via purchase. |
|
|
|
Phil / others
Thoughts on the gigabyte mini you ran/run?
I have a few of the GTX 1070 gigabyte "ITX" cards - work reliably, don't clock as high as full-sized cards, but very helpful on heat management in 3-card non-riser rigs, and have had ZERO issues with them on a reliability basis. 2x blower style rigs with 1x gigabyte itx or msi aero itx are great. trouble free 650+650+400 = 1700sols at 550-575 watts I am running them here https://www.nicehash.com/index.jsp?p=miners&addr=1JdC6Xg3ajT3rge3FgPNSYYFpmf53VbtjeHaving trouble finding mini's at a decent price anymore . . wish I bought the zotac 1070 when they were on sale for $350 a week or 2 ago T_T Also total side note, does my trust show up as 1 , 2, or 0 and how exactly does trust work because it seems most ratings don't go into the category that actually counts for your profile . . . You are new and the deals done by you are good so far. I have a good well really good record. So if I put you on my trust list you would get good numbers . On my end I can't give trust out easy multiple deals knowing where the person lives is something I try to do before I place a trust listing . Which is the higher rating. Rather then a trust for a deal. And I still need to review listings since they are very long in my case. |
|
|
|
|
so I will run 2 gigabyte 1070 itx cards on eth
hoping to get more support in a few days
ewbf_ 3.4
would be nice
better clocks
would be nice
I can only do 2 cards on a mobo that did 4 amd cards
so being able to do 4 cards would be nice.
|
|
|
|
Phil / others
Thoughts on the gigabyte mini you ran/run?
I have a few of the GTX 1070 gigabyte "ITX" cards - work reliably, don't clock as high as full-sized cards, but very helpful on heat management in 3-card non-riser rigs, and have had ZERO issues with them on a reliability basis. 2x blower style rigs with 1x gigabyte itx or msi aero itx are great. trouble free 650+650+400 = 1700sols at 550-575 watts I am running them here https://www.nicehash.com/index.jsp?p=miners&addr=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje |
|
|
|
|
okay lots of testing of beta nvidia build.
I can get 95 watts on gigabyte 1070 itx cards
pretty good compared to 150 stock.
the clocking does not work for my msi 1070 itx cards
|
|
|
|
Pretty sad that no answers on the issue with cards dropping to 0 mh/s from Tytanick.
okay show a screen shot of your rigs with your clocks |
|
|
|
How would I be able to do this with one program running.
you can not do it. you need to run 2 instances of the same program or just make 2 start files one named for yourself one named your for brother and switch one day all you one day all him |
|
|
|
hi, does gtx 1070 gaming need modification on bios for mining please?
no most of us set msi afterburner 4.3 for the clocks it is a free download and easy to do |
|
|
|
dang i didnt get that email for the 10% or i would take up on that purchase, my 2 @ 8% were cancelled the other day, because i ordered some on ebay and on newegg.com and because they were coming from the same company they cancelled my order on ebay out.. which kinda sucked..
nice price but btc is dropping a lot |
|
|
|
Phil , could you sum up about prices :
what are the best prices you ever paid for new 1070 , 1080 and 1080TI ?
Thanks a lot
The best I've found... 1070 - $319 1080 - $419 1080ti - $639 Depending on where you live you'll have sales tax on those as well. Due to demand it's pretty much impossible to hit those prices right now though  I purchased a 1080ti today for 570 new with full warranty. all time best price ever  I will show how.. I am just about capped on my account I am at 470 bucks earned for this cycle max is 30. but if you don't have a lot of ebucks for the cycle you will get 70 off this card   |
|
|
|
smOS is changing some of my card's core clock speeds without any input. The snapshot below is a of a rig running 7 RX 570s, all with stock bios, and no OC settings applied (ever) via the Dashboard.  As you can see, two of them have switched from the default 1128 to 1191. This seemingly happens at random to different GPUs across all of my rigs. The change to 1191 is not random, however. A couple of my rigs currently have some GPUs with a custom bios which has a default core clock of 1191. The rig in the photo has not ever had anything but cards with the stock bios connected. I have also manually input 1191 as the core clock on other rigs of mine, but I have never applied an OC to the rig in the picture. Changing the core clock settings in smOS does not seem to have any effect. It will change the clock upon startup, but it may change again before mining even starts, without any notice in the terminal. edit: 1128 is not even the stock clock according to MSI spec sheet, it is actually 1268. So why is smOS automatically downclocking my cards??? it is using linux drivers not windows which may vary a bit |
|
|
|
I will try this tonight, had to get nvidia cards while I wait on my AMD order, windows has not been very stable for mining. Does it support mixing amd and nvidia cards because that is my eventual goal.
I have a amd 290 I will put in on and find out does not work with a 1070 and a r 290 on the same mobo |
|
|
|
I will try this tonight, had to get nvidia cards while I wait on my AMD order, windows has not been very stable for mining. Does it support mixing amd and nvidia cards because that is my eventual goal.
I have a amd 290 I will put in on and find out |
|
|
|
|
Show Posts
