No Zels....I am VERY appreciative of all the help I've been given. Ya don't need to be rude and no, I'm certainly not lazy! While I was working on trying to get MinerControl working, I was also trying to work on my S3+. I tanked that, and am now trying to recover. I think I might have bricked it. Money down the drain for a small-time miner hobbyist. Sorry I didn't get back sooner. Needed a break to dry my eyes.


edit; aww, dang...that link did me no good. Takes me to a version I've never seen. Sure Zels...send me a sample.conf that I can just customize to fit. That would be great as I am going to be very busy getting a antMiner back up before my wife cuts off my sac. Gotta order a break-out board now. Thanks, in advance,  for the .conf file. You may have saved my life.

edit 2!; my fingers are too fast (wish my brain was)....maybe I need a new hobby!!

Whew...what just happened? Can't pull up site.

edit; did we just hit?

Hi,

Ok..I've been trying to set this up for 2 days now & still can't get it. I have a GTX750Ti 2GB running ccminer (spMOD latest). I want to mine just quark and convert to a couple of different coin (not BTC). Can't seem to come up with a .conf that will let me do this. Frustrated!! and ready to just .cmd line the miner and not use this program at all. Can anyone send me a .conf sample for just quark mining?

Thanks for listening!

edit; there's no readme I can go to for an example. Reading this thread just got me more confused. Please help. I wanna use yaamp with nice/westhash as fail-over.

How's that workin' out for ya?

@ DougB62...I'm still waiting for the fail to see if your file works. I may not be so smart...just an ass. My fingers were too quick to restart my miner. I do know tho that with your file I had to put my primary pool as the second in the command line. I'm gonna delete my comment below until I know if the kudos need to be applied.

Back in a few!

edit; tbear is right...dang it. I was really hoping dougb62 was correct. Thanks for the try; appreciate it!

I believe that would be a YES. Different setting for different cards. Could be wrong, but it's what I would do. Oh wait, sorry, I know that you can run one instance of your miner, by using the command switches (-d). Look at your readme file. It's in there. Personally, I would run different instances of the miner tho, so if one card craps out, you can close the miner to fix that card while the rest keep going. Otherwise you shut them all down to work on just one. It's all a preference thing. Hope that helps. Done.

Yes,,,yes,,,yes! THIS is what I've been trying to get an answer to for these last several days. How do I get a workaround for this? More to the point...I need an example of the .bat file to set it up.

Thank you

edit; if ya go back about 9 post pages, I asked about this. I guess because I haven't gotten very involved, until lately, nobody thought to look at my posting much. I can't write code but I do know when something ain't right. Question...just what does the workio thread do? Is it software (code) related, hardware (vid card), or internet speed (not sure of tech term) related? If I knew what that did, I could experiment. Don't remember who, but somebody posted a example of the .bat loop file but I could not get it to work. Just running a simple one now but playing with the switches. My current file (I change and fiddle with it tho);

ccminer -a quark -o stratum+tcp://yaamp.com:4033 -u LV4oV0xyLWu6pntuq97L0PheeavJsALJYo -p mHung   -i 20.1 -r -R=3 --cpu-priority 3  

It's actually not running too bad. Still get the random workio thread disconnect tho. Sooo...how do I force a restart of ccminer. The vid card & driver doesn't seem to crash but things slow down, then...crap, nothing, workio disconnect. If I'm sitting here (which is a lot of the time) I just close and restart ccminer. I'd really like a set it, forget it, have a nice day kinda thing tho. I could make a beer run and it would still be mining or go to the beach (which is where I'm headed in a bit). Ya know. OK...done editing!  Well almost...I really would like a solution. I've forgotten more than I remember, so I leave things up to the ppl in the know...you guys. You're a great group, mostly, and I know eventually the info comes out.  Thank You very much for any replies. Bye, for a few hours...heading out for some fun in the sun.

Hey all,

Thanks for the input for my .bat. I had already done everything mentioned so I have no flippin idea. Something is kicking me in nice/west. Works fine in yaamp. I'll work on it.

Thank you

Didn't know that computers, code, etc, had a 'country'. Isn't this forum supposed to be about sharing/gaining knowledge & incite? Helping those who understand less. It's done for the common good. The love of a hobby, for some. Maybe this forum is here because we have fun. None of that says 'I'm from whatever country'. And it certainly doesn't scream that so 'n so is smarter than the other. We ALL have something to contribute. So, be humble. Be inquisitive. Be grateful. Can't we all just get along?

That being said...still need help with a .bat for nicehash/westhash. I don't get what I'm doing wrong. Can't be that dang hard but getting workio thread terminating error. Sample plz.

Thank You

Ok....must be having a brain fart today. Setting up a .bat file for running nicehash. Solo mining runs fine for x11, but I'm having trouble with quark. Comes up telling me workio thread terminating. Would somebody else that mines on nicehash mind showing me a sample of a Windows .bat.

Thank You


edit; Hmmm....I can't try GPU mining with a 750Ti 2G? Really...what am I doing wrong today? Today is almost over and I want a do-over!
   OHH...duh! ccminer doesn't do scrypt. sheesh....I think I need some beers!!

edit; Anybody ever get a stable OC for the 750Ti above 1400Mhz? If so, clue me in. Best I have is 1400MHz GPU /w 5300 MHz Mem.

And now getting a 502 bad gateway error...can't even get in....wtf! Think I'm going back to supranova. Bye bye yaamp

Nooo! Tried that.

@sp-

Aww Man....I don't do code...compile...etc. But I can run the dog-snot outa a Win .exe.

edit; Ohh..... I've got some x11 shares comin your way. That is your .bat isn't it?
                  (hmmm...I'm impressed. Consistent 33s kh)
edit2; Aww...hell...sorry sp, meant to send those shares to you. Thought it was your x11.bat. Somebody got some shares!!!

Also ...is it uploaded to git?

What does -e do and if I'm using -g I don't need it or what?

I'm seeing the same. I've got a couple of hours to play, so I'll try some different switches and see if it gets better.

edit; did you see my post below? Kidda gets me when it runs for so long, /w no determined timing, and pulls the fault. Never had that happen before. I did add some things to the network, but it should handle it. Just strange!!

Ahhh ha! Got it to do this again. I've been getting disconnected from the pool and would like to know if there is a problem or a workaround to it. I have a single 750Ti card running a basic .bat file. Just the pool with the algo & " -g 2 --cpu-priority 3" switches. I 'sometimes' get this error;

Stratum connection failed: Failed to connect to poolX.com port XXXX: Connection refused
...terminating workio thread


of course the Xs are not really there...but ya get the meaning.
Is this a problem on my end, pool side or a coding issue? This has never been an issue, in the past. Very much appreciated!

Thank You for all the hard work!

Happy mining!!

edit: Oh crap.....running the early D/L of release49, CUDA6.5, Win8.1...sorry, shoulda told ya that up top!

Ok folks....just a quick question...when will the finished product be ready for D/L?

Thank You for all the hard work you guys are doing.

Happy Mining!!

Not only gota buncha rejects....it sees my coin as the wrong one!! What the heck is a ISLAcoin?? WORTHLESS. Supposed to be CANN! It's a x11. I'm going back to supranova if they don't fix this!!!

Thank you.

scryptr,

Not sure what context that 'concurrent' falls into but... So, to mine just x11 coins, then, I take it that the sp (latest, of course) will give me the better hashrate? Will it mine LTC? Also, would you mind giving me a correct .bat file for the best hash /w my 750Ti?    Thank you very much for the help!

Edit: did a reread & believe I understand the concurrent remark. Sorry. Not sure if it (sp) will mine just any scrypt tho. I've always thought it was for x11 only. I STILL don't know the correct syntax for my .bat tho. Ive got it OCed already. Help?

Thanks!