USB miners updated to 0.249btc/unit and 34,99€/unit in ebay. Links in OP.
Cheers!
Already bought 9 @ Bitmit site. I only hope to get some USB Gizmos with the new colors, like Blue, strange Red, Gold and Silver, also the ones with the effects in the heatsink... Thanks for the price drop, BitAddict. I only have blue (the normal one) and black. Blue please... I'm full of Gizmos in black (and old red) color. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffbcdn-sphotos-c-a.akamaihd.net%2Fhphotos-ak-ash3%2F1277922_10202057542147267_783216185_o.jpg&t=663&c=eJlJEXA-dj7iyQ)
|
|
|
USB miners updated to 0.249btc/unit and 34,99€/unit in ebay. Links in OP.
Cheers!
Already bought 9 @ Bitmit site. I only hope to get some USB Gizmos with the new colors, like Blue, strange Red, Gold and Silver, also the ones with the effects in the heatsink... Thanks for the price drop, BitAddict.
|
|
|
Oh no! Not again! cgminer: LATEST-IS-3.4.2
|
|
|
As I could read through the thread, if I just replace the 12 MHz crystal and no other component, I am limited to 13 MHz am I wrong?
Does anyone have a photo of a USB Block Erupter without the 12 MHz crystal soldered on it to see if I can do the work with only a soldering iron and a desoldering pump?
here in my tread you can see (bad) photos of my complete desoldered usb erupters. https://bitcointalk.org/index.php?topic=270367.0btw. fuses are set... i cant read firmware dump from attiny. (but maybe there are some sticks with open fuses?) Thanks for the link, ooxtcoo.
|
|
|
As I could read through the thread, if I just replace the 12 MHz crystal and no other component, I am limited to 13 MHz am I wrong?
Does anyone have a photo of a USB Block Erupter without the 12 MHz crystal soldered on it to see if I can do the work with only a soldering iron and a desoldering pump?
|
|
|
Oh no! Not again! cgminer: LATEST-IS-3.4.1
Thanks for the new cgminer @ GitHub. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Already using it @ my RPI's.
|
|
|
Oh no! Not again! cgminer: LATEST-IS-3.4.1
|
|
|
I must insist with the send e-mail alerts option. I (and all Gmail users) need SMTP authentication to use MinePeon to send mails via gmail. Outgoing Mail (SMTP) Server - Requires TLS smtp.gmail.com Port: 465 or 587 Requires SSL: Yes Requires authentication: Yes Use same settings as incoming mail server Full Name or Display Name: [your name] Account Name or User Name: your full Gmail address ( username@gmail.com). Google Apps users, please enter username@your_domain.comEmail address: your full Gmail address ( username@gmail.com) Google Apps users, please enter username@your_domain.comPassword: your Gmail password If your client does not support SMTP authentication, you won't be able to send mail through your client using your Gmail address. Also, if you're having trouble sending mail but you've confirmed that encryption is active for SMTP in your mail client, try to configure your SMTP server on a different port: 465 or 587.
|
|
|
Hi nekonos.
I sent you a PM Today at 09:28:57.
Best regards.
|
|
|
One more interesting thing... I'm using my TZ: Europe/Lisbon [WEST +01:00]. The time displayed by cgminer and all devices @ main page is correct, but the time that the live graphics displays is shifted by -1 hour. Also, when I try static charts and then I select 'update', I always get same error: Graph error: opening '/opt/minepeon/http/rrd/hashrate.rrd': No such file or directory Graph error: opening '/opt/minepeon/http/rrd/hashrate.rrd': No such file or directory Graph error: opening '/opt/minepeon/http/rrd/hashrate.rrd': No such file or directory Graph error: opening '/opt/minepeon/http/rrd/hashrate.rrd': No such file or directory Graph error: opening '/opt/minepeon/http/rrd/hashrate.rrd': No such file or directory
MinePeon Status Pools Settings Advanced About Contact License
Status
and the graphics not updated.
|
|
|
Already voted. Good luck.
|
|
|
Great! But let's put one more line in the page... ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fct1aic.dyndns.info%2FTriplemining_20130829.png&t=663&c=KMIKCc2Si77slg) Oh... it's me! in 10 th position.
|
|
|
1. B ... full refund 2. C ... upgrade to next gen 3. D ... legal actions!
I think this is the way to go ... at least for me ...
In respect for nekonos and bizwoo, I will keep my 2 orders and I will order/pay nekonos for 2 Klondike16 (1 from each GB) upon reception of the 32 chips by bizwoo.
|
|
|
Already registred @ MinePeon forum. Thanks, Neil. With last git pull (and earlier...) Miner 11h 30m 3s - Pi 0d 58h 56m 20s - Temp 34.166 °C I like the 0 days and 58 hours... Perhaps a Mercury day... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Mercury Named after: Mercury, the fast-footed Roman messenger of the gods. Mean Distance from the Sun: 57,909,175 km (35,983,093.1 miles) or 0.387 astronomical units Diameter: 4,879.4 km (3,031.92 miles) Revolution period: 0.24 Earth Years (87.97 Earth Days) Rotation period: 58.65 Earth Days Moons: None Atmosphere: Mercury has very little atmosphere. Mercury's thin atmosphere consists of atoms blasted off its surface by the solar wind, a constant stream of particles coming from the outer layer of the Sun. Temperature: Mercury's surface temperatures range from 467 degrees Celsius (872 degrees Fahrenheit) to -183 degrees Celsius (-300 degrees Fahrenheit). The average surface temperature on Mercury is 166.86 C (332.33° F). Composition: Rocky planet with many craters. My weight on Mercury: 31.374 pounds Interesting Facts: Scientists have found water ice inside deep craters at the north and south poles.
|
|
|
Aug 27 15:45:55 minepeon systemd[1]: PID file /run/httpd/httpd.pid not readable (...t. Thanks for your kind help and support, yxzq. You're welcome :-) I encountered a similar error and just confirmed that this adjustment is missing in v0.2.3 This is the solution: https://gist.github.com/thgh/6330000#start-apache-on-bootYou might have to disable/stop httpd.service first. I disabled and stopped httpd service, did the edit of the file, replaced root by http, confirmed that I did save the file opening it again, then i enabled and started the service. I had the same lack of data in the live graphics. Then I did a reboot of the RPI. After entering again @ the Main status page, I get same problem as seen in the print-screen I included this morning.
|
|
|
First of all: for those who use early builds, read this: https://gist.github.com/thgh/6364973But... to edit any pool, I have to delete it and make new pool entry... ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Is it because de Save pools button disappears? Are there any fields marked red? Sorry, I was distracted. Of course it works. As i change anything, appears a green 'Save' button and it saves the new values. Question: What is 'Enable Remote control' option for?
A new feature that we would like to build. It will upload the stats to a remote server, so you can check up on minepeon at anywhere anytime. If that works out, the settings and restart stuff might also come available. WOW! Great! Thanks. Also, on the RPI with newer Arch Linux and from time to time, the live graphics go down and stay @ 0 Hash/s for some time. Reloading doesn't fix it. The other RPI always show live graphics.
Looking at the screenshot, it seems like apache/httpd is down. When an error occurs while trying to refresh the status, the status is not updated but the title should become [OFF]. I should make this more clear in the interface. Because now it looks like everything is normal. How long does this command take and what's the output? sudo systemctl status httpd.service I could not replicate the error I was getting this morning. The command gives me: minepeon@minepeon ~ :( $ sudo systemctl status httpd.service [sudo] password for minepeon: httpd.service - Apache Web Server Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled) Active: active (running) since Tue 2013-08-27 15:46:00 BST; 22h ago Process: 174 ExecStart=/usr/bin/apachectl start (code=exited, status=0/SUCCESS) Main PID: 231 (httpd) CGroup: name=systemd:/system/httpd.service ââ 231 /usr/bin/httpd -k start ââ 233 /usr/bin/httpd -k start ââ 4056 /usr/bin/httpd -k start ââ 4677 /usr/bin/httpd -k start ââ 5960 /usr/bin/httpd -k start ââ11478 /usr/bin/httpd -k start ââ11832 /usr/bin/httpd -k start ââ11833 /usr/bin/httpd -k start ââ14190 /usr/bin/httpd -k start ââ15899 /usr/bin/httpd -k start ââ19257 /usr/bin/httpd -k start ââ20201 /usr/bin/httpd -k start
Aug 27 15:45:51 minepeon apachectl[174]: httpd: Could not reliably determine the ...me Aug 27 15:45:55 minepeon systemd[1]: PID file /run/httpd/httpd.pid not readable (...t. Aug 27 15:46:00 minepeon systemd[1]: Started Apache Web Server. minepeon@minepeon ~ $
UPDATE: I could replicate the 'problem' with a refresh of main 'status' page. But trying the same command again, it gave me the same output as the one avove, with the addiction of the following line at the end of the GGroup list: ââ20400 /usr/bin/httpd -k start Thanks for your kind help and support, yxzq. Any chance there will be coming an new version of Minepeon this upcoming week?
Probably not.
|
|
|
One more... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffbcdn-sphotos-d-a.akamaihd.net%2Fhphotos-ak-ash3%2F620427_10202043917086649_1524215602_o.jpg&t=663&c=RFhyNnwBbLkJmA)
|
|
|
I still can see my Pools @ main page, but @ Miner page, the Pool only has empty. I still can't modify my pools.
Thanks for bug testing :-) I am now making a button that fixes the problem. Should be working by tonight. With last git pull, I get now miner and RPI uptime: - Miner 13h 31m 38s - Pi 13h 31m 17s - Temp 36.856 °C
- Miner 8h 40m 16s - Pi 32h 51m 31s - Temp 36.856 °C
The Compatibility Reload button worked ok and I now can see my pools @ Miner screen. And no more warning messages when going to Main page. Many thanks, yxqz. But... to edit any pool, I have to delete it and make new pool entry... ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Temp of both RPI are exactly the same? Odd... Question: What is 'Enable Remote control' option for? Also, on the RPI with newer Arch Linux and from time to time, the live graphics go down and stay @ 0 Hash/s for some time. Reloading doesn't fix it. The other RPI always show live graphics. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fct1aic.dyndns.info%2FMinePeon_20130828_1.png&t=663&c=OA5TMXZ63w_b7Q)
|
|
|
|