我已经挖到了200币了。现在送币，每个地址一个币。送币活动随时结束。
钱包不好下载啊 找qq群， |
|
|
|
钱包地址： https://github.com/tr011coin/tr011coin-WinQTtr011coin.conf文件内容： ---------------------------------- daemon=1 server=1 #gen=1 rpcuser=User rpcpassword=Pass rpcallowip=127.0.0.1 rpcallowip=192.168.*.* rpcport=9033 port=9032 --------------------------------- 目前该币已经无法solo到，只能去矿池了。大户除外。 有没有人建议一个QQ群呀。这个币是老外开发的吗？ |
|
|
|
|
UdvvVBAuvDi2eSGZhA21SH3zfQiQFvJMDe
thanks
|
|
|
|
|
FSePvt2Mh9jDRNruvpHQTGQ4ZKpX7R8DPU
thanks
|
|
|
|
|
R9 290X在鱼池里挖LTC，能跑到什么速度。能过1M吗？如何设置conf文件。
大家快来秀秀你的R9 290X的速度吧。
想买个来玩玩。
|
|
|
|
|
94myepWqiUPpeMVxcgtaHFKcccFsYb7TmT
thanks.
|
|
|
|
Pool has been down for 2 minutes as I had to optimise it for PoW/PoS, sorry for the short downtime. Now Back up and we're getting blocks!  pool down? I can not see my hashrate and pool status. What is your username? the pool is unstable. When I start cgminer, my hashrate is high, but it will drop and there is no accept. It is so strange! I have to restart cgminer again and again. I had the same problem getting setup. You may have to restart your computer to clear all the memory and then it may stabilize on the higher rate. Worked for me with cgminer. I think there may be a memory leak in the code that causes that to happen. Thanks for your advice. I restart my pc and close other programmes, just cgminer. |
|
|
|
|
pool's AUTOMATIC PAYOUT THRESHOLD1-1000 GRA. Set to '0' for no auto payout
payout threshold should be 10000 GRA.
|
|
|
|
Pool has been down for 2 minutes as I had to optimise it for PoW/PoS, sorry for the short downtime. Now Back up and we're getting blocks! pool down? I can not see my hashrate and pool status. What is your username? the pool is unstable. When I start cgminer, my hashrate is high, but it will drop and there is no accept. It is so strange! I have to restart cgminer again and again. |
|
|
|
Pool has been down for 2 minutes as I had to optimise it for PoW/PoS, sorry for the short downtime. Now Back up and we're getting blocks! pool down? I can not see my hashrate and pool status. |
|
|
|
我也发个贴，
出2T矿机，只要0.1B，发如下地址：18888888ypYtWjMTpM7yWy8WkuSipk8eat
等我心情好就发货！
哈哈哈，已打款 哈哈，已发货 已收货，就是挖矿速度太慢，一天不到2个币。 |
|
|
|
|
mcxfee is down to 0.05 BTC.
|
|
|
|
国内有人陆续收到了蝴蝶机，有人在QQ问怎么挖，这里把自己的使用方法简单说一下，希望能帮到一些人。 驱动下载网址（按照操作系统选择对应的版本）： http://www.ftdichip.com/Drivers/VCP.htm软件下载网址（选择BFGminer (currently the most advanced)）： http://www.butterflylabs.com/driversBFGminer软件中有个example.conf文件，简单修改一下矿池信息即可（将自己的矿池账号信息替代原来的），其他可保持不便，然后将文件名修改成bfgminer.conf。 或者直接新建一个文本文件，输入下面的内容，保存成bfgminer.conf。其他参数慢慢研究后再往上加。 { "pools" : [ { "url" : " http://stratum.f2pool.com:3333", "user" : "dukong.0", "pass" : "1" } ], "scan-serial" : [ "/dev/ttyUSB0", "/dev/ttyUSB1", "/dev/ttyUSB2", "/dev/ttyUSB3" ] } 然后双击运行bfgminer.exe即可开始挖矿。 谢谢分享。 |
|
|
|
|
XPM交流群，群号255519396
原来的群已经达到了1000人的上限，但发现还是有好多网友加群。
无法，只要用另外的一个群了。群号255519396。
xpm的价格已经过了20了，年前能过50吗？ 值得期待。
|
|
|
|
|
Show Posts
