@MinerEU I think you are a good company and have been very satisfied with service to date, but have been waiting over 2 weeks for refund for Zeus preorder and am very frustrated. I want a refund immediately for the cancelled pre-order of ZeusMiner ZIII ASIC chip. I have sent several mails and have still not even been given an exact date.
If Zeus is at fault, then they need to payup now! Here are my details
Order id# MinerEU-1062
Request 2305
I don' t know if MinerEu are good company. This is my first time with MinerEu and dont look so good at this point. I hope you are right. Over 2 weeks are too long time to wait refund. If Zeus will not payup, MinerEu have to refund anyway. Maybe all of us need to take contact Zeus also. That will be the next step, very annoyed with Zeus as their cloud hashing service is much less profitable than the gen III blades would have been if we actually received them. MinerEU have not dissappointed me up to now so I would appreciate if they pay attention to this thread and sort this out, that will determine if they are a good company or not! I have an answer from Zeus, because in the same case, and they tell me that they send refun to minereu, so it's time to minereu to refund us!!!! MinerEu where is our refund? |
|
|
|
@MinerEU I think you are a good company and have been very satisfied with service to date, but have been waiting over 2 weeks for refund for Zeus preorder and am very frustrated. I want a refund immediately for the cancelled pre-order of ZeusMiner ZIII ASIC chip. I have sent several mails and have still not even been given an exact date.
If Zeus is at fault, then they need to payup now! Here are my details
Order id# MinerEU-1062
Request 2305
I don' t know if MinerEu are good company. This is my first time with MinerEu and dont look so good at this point. I hope you are right. Over 2 weeks are too long time to wait refund. If Zeus will not payup, MinerEu have to refund anyway. Maybe all of us need to take contact Zeus also. That will be the next step, very annoyed with Zeus as their cloud hashing service is much less profitable than the gen III blades would have been if we actually received them. MinerEU have not dissappointed me up to now so I would appreciate if they pay attention to this thread and sort this out, that will determine if they are a good company or not! agree " so I would appreciate if they pay attention to this thread and sort this out, that will determine if they are a good company or not" |
|
|
|
@MinerEU I think you are a good company and have been very satisfied with service to date, but have been waiting over 2 weeks for refund for Zeus preorder and am very frustrated. I want a refund immediately for the cancelled pre-order of ZeusMiner ZIII ASIC chip. I have sent several mails and have still not even been given an exact date.
If Zeus is at fault, then they need to payup now! Here are my details
Order id# MinerEU-1062
Request 2305
Idont know if MinerEu are good company. This is my first time with MinerEu and dont look so good at this point. I hope you are right. Over 2 weeks are too long time to wait refund. If Zeus will not payup, MinerEu have to refund anyway. Maybe all of us need to take contact Zeus also. |
|
|
|
I send a message to zeusminer, and they answer to me that they refund minereu today.
Anyone getting refund? I just think they are playing with us. I just hope Iam wrong. |
|
|
|
Are you the scam company?
I ordered Zeus miner and still waiting my refund.
Are you broken?
Where the hell is my money?
Valpe
Hi, Our company is the official distributor of Zeus miner. Zeus will send the refund to us today. please provide your order id, We will give priority to process your refund. Thanks Thanks for you reply. Just give us our money back, its enough. Sorry my tone of voice. I will happily correct my words after refund and some more. Valpe |
|
|
|
|
Are you the scam company?
I ordered Zeus miner and still waiting my refund.
Are you broken?
Where the hell is my money?
Valpe
|
|
|
|
Hum,
They said to me, that's they need to be refund by zeus before refund us
Maybe then we need to ask from zeus when they are going to refund MinerEu. Lots of noise to all Zeus forum. |
|
|
|
Still no refund from MinerEU. They originally said "by next week" so I emailed to ask if it would be by midnight Sunday but now they say it will be "asap this week"  I asked again when they are going to refund? They said 11.11.2014 "2-3 working days" |
|
|
|
Can u tell me please with what coin do u make 0.002 btc per 750 Ti?
I want in on that too!^^ he would be stupid to tell  (either utc or yac...) UTC,,,New miners are welcome |
|
|
|
I got an email from MinerEU where I made my preorder and had a look at what ZeusHash cloud mining they were offering and the maintenance fees are such a ripoff. To the credit of MinerEU though, they seem quite happy to refund me the full amount instead.
Do you have your refund from minereu or not yet? (i'm in the same case) I am in the same case also. MinerEU says "next week". So we see then. |
|
|
|
750TI hashrate ?
With CudaMiner, around 3-3.3 khash on NF14 Scrypt-Jane, with the right settings (Lookup Gap 4 + autotune). Without lookup gap you'll probably see something around 2.7-2.8 at stock clocks. ah k, I thought your newly compiled cudaminer would give maxwell chips a boost but not for the 750ti it seems. (only 970/980) (old miner gave me 3.3khash as well) It's good to hear that it helped with the 970. I'll probably attempt a compute52 compile for 970/980 cards against cuda 6.5 to check for any more gains there. You lose compute10 going to 6.5, but anymore that's not really much of a loss. I don't think that the kernels have been really optimized for Maxwell, but there might be some improvement. Whenever I use auto, cudaminer crashes after some time, I don't know how to make it work. Do I have to set scrypt-jane:14 or leave it? I tried to use your settings with debug switch but it crushed :/ I have one 750ti from Gigabyte. Thanks for calling that out. "-a scrypt-jane:14" needs to be in there too. Best settings for single 750 ti , cudaminer.exe --algo=scrypt-jane:UTC -H 2 -i 0 -m 1 -l t5x24 -L 4 -b 16384 -o stratum.....etc..etc Consistent 3.3 - 3.5 khs My 6x750ti is working better without -b .. . and two of 750ti working better with -l t60x2. So right setup values depend your computer and gpu's. I have all 750ti same model and brand. |
|
|
|
750TI hashrate ?
With CudaMiner, around 3-3.3 khash on NF14 Scrypt-Jane, with the right settings (Lookup Gap 4 + autotune). Without lookup gap you'll probably see something around 2.7-2.8 at stock clocks. ah k, I thought your newly compiled cudaminer would give maxwell chips a boost but not for the 750ti it seems. (only 970/980) (old miner gave me 3.3khash as well) It's good to hear that it helped with the 970. I'll probably attempt a compute52 compile for 970/980 cards against cuda 6.5 to check for any more gains there. You lose compute10 going to 6.5, but anymore that's not really much of a loss. I don't think that the kernels have been really optimized for Maxwell, but there might be some improvement. Whenever I use auto, cudaminer crashes after some time, I don't know how to make it work. Do I have to set scrypt-jane:14 or leave it? I tried to use your settings with debug switch but it crushed :/ I have one 750ti from Gigabyte. I have same problem. |
|
|
|
I see only 7 miners in multi X11. Is this all what UTC community can do? When we dont have multi.. everybody is whining we need multi... and when we have one only 7 is mining there. I think multi x11 is only waisting Krackos time. I challange UTC community Lets use multi ... everybody 1 rig to multi.. for 3 days. Ihave about 70 Mh there. Can we do.. yes we can!!!  Valpe Thanx Uggle  , been waiting for this simple setup with a working batfile! Made me point 2 of my rigs to the multipool! All working well so far, let's see some payouts in UTC soon Cheers! Ok ppl! We need more miners to come to the multipool http://multi.tumblingblock.com/ ! I have now set-up my rigs for the x11 algo and heres the steps needed. I guess like a lot of other users here I have only been mining UTC directly and have not updated myself in the ways of mining x11 algo. Note: For ATI cards. Step 1) go here and download the newest SGminer: https://www.nicehash.com/software/sgminer-5.0-badman74-mod-win32.zipStep 2) Make sure you have a new version of catalyst drivers. I heard that the verision 14.7 is the best which is also the one I am using. step 3) Configure your .bat file. This is my settings: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe --algorithm darkcoin-mod -o stratum+tcp://multi2.tumblingblock.com:5000 -u <your wallet address> -p x -w 128 -g 2 -I 17 Open the file: It gives me 4.11 Mhash/s per r9 280x card, I heard some get more around 4.2Mhash to 4.4Mhash. Useful links for help: http://wiki.darkcoin.eu/wiki/Mining_Darkcoin <-------------------Darkcoin mining wiki https://bitcointalk.org/index.php?topic=632503.2040 <------------ SGminer official thread. Come and join the fun in the multipool !  This is great everyone! We went from 20 Mhash to 100+ Mhash in just half a day! Prepare to go moontime if more ppl decide to join.  |
|
|
|
+1 GPU mining is coming to end. No profit to me...long time. The Multipool is very good choice. Valpe [/quote] This is just the conclusion that I came to the other day when I decided to start mining at the multipool. Honestly right now I am not making any money mining UTC directly (very little atleast), so what can we do about it? I still want to support UTC, since I have been a long time believer! Well... the only good thing I could come up with is trying to raise the value of the coins I already have, and the most reasonable way of doing this is by putting my rigs on the multipool (since I do not have fiat or BTC to spend). I think many should consider the same thing, and that's why I am promoting it in the little ways that I can. Edit: There is another side to it as well, investors want to invest in a coin with a strong community, having a multipool with good hash shows dedication from us. [/quote] |
|
|
|
Maybe you are too hasty now. Those workers have mining just several hours not a day. Look back again after 1 or 2 days. Still if we all point at least one rig or couple gpu to multi... it will make difference. Happy mining Valpe Uggle - while I admire your enthusiasm - these are the facts from the tumblingblock multipool There are only 8 workers at present http://multi.tumblingblock.com/minerspayouts in UTC over the last 24 hrs were 207.927281 UTC This was worth 0.016634182 BTC that was worth USD 6.320989342 ($6.32) I doubt this is paying for power and hosting - let alone making any difference to UTC price Unless this increases 100 fold - it will not make any difference at all - a LOT more miners required before moontime. Serious question - is anyone making ANY money from mining? Thanx Uggle , been waiting for this simple setup with a working batfile! Made me point 2 of my rigs to the multipool! All working well so far, let's see some payouts in UTC soon Cheers! Ok ppl! We need more miners to come to the multipool http://multi.tumblingblock.com/ ! I have now set-up my rigs for the x11 algo and heres the steps needed. I guess like a lot of other users here I have only been mining UTC directly and have not updated myself in the ways of mining x11 algo. Note: For ATI cards. Step 1) go here and download the newest SGminer: https://www.nicehash.com/software/sgminer-5.0-badman74-mod-win32.zipStep 2) Make sure you have a new version of catalyst drivers. I heard that the verision 14.7 is the best which is also the one I am using. step 3) Configure your .bat file. This is my settings: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe --algorithm darkcoin-mod -o stratum+tcp://multi2.tumblingblock.com:5000 -u <your wallet address> -p x -w 128 -g 2 -I 17 Open the file: It gives me 4.11 Mhash/s per r9 280x card, I heard some get more around 4.2Mhash to 4.4Mhash. Useful links for help: http://wiki.darkcoin.eu/wiki/Mining_Darkcoin <-------------------Darkcoin mining wiki https://bitcointalk.org/index.php?topic=632503.2040 <------------ SGminer official thread. Come and join the fun in the multipool ! This is great everyone! We went from 20 Mhash to 100+ Mhash in just half a day! Prepare to go moontime if more ppl decide to join. |
|
|
|
Joining the fun with 2 rigs. Valpe Ok ppl! We need more miners to come to the multipool http://multi.tumblingblock.com/ ! I have now set-up my rigs for the x11 algo and heres the steps needed. I guess like a lot of other users here I have only been mining UTC directly and have not updated myself in the ways of mining x11 algo. Note: For ATI cards. Step 1) go here and download the newest SGminer: https://www.nicehash.com/software/sgminer-5.0-badman74-mod-win32.zipStep 2) Make sure you have a new version of catalyst drivers. I heard that the verision 14.7 is the best which is also the one I am using. step 3) Configure your .bat file. This is my settings: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe --algorithm darkcoin-mod -o stratum+tcp://multi2.tumblingblock.com:5000 -u <your wallet address> -p x -w 128 -g 2 -I 17 Open the file: It gives me 4.11 Mhash/s per r9 280x card, I heard some get more around 4.2Mhash to 4.4Mhash. Useful links for help: http://wiki.darkcoin.eu/wiki/Mining_Darkcoin <-------------------Darkcoin mining wiki https://bitcointalk.org/index.php?topic=632503.2040 <------------ SGminer official thread. Come and join the fun in the multipool ! |
|
|
|
Use with this Ati beta 14.6.. This version gives me extra juice. https://github.com/badman74/Binaries/archive/V5_0_mod.zip Asus 280x undervolted gives 4.3 Gigabyte 280x undervolted gives 4.1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe --algorithm darkcoin-mod -o stratum+tcp://multi2.tumblingblock.com:5000 -u <your wallet address> -p x -w 64 --thread-concurrency 8192 --xintensity 64 --hamsi-expand-big 7 --hamsi-short --blake-compact --keccak-unroll 8 --luffa-parallel --gpu-threads 2 --lookup-gap 2 --gpu-engine 900 --gpu-memclock 1350 --gpu-powertune -20 Happy mining Valpe Ok ppl! We need more miners to come to the multipool http://multi.tumblingblock.com/ ! I have now set-up my rigs for the x11 algo and heres the steps needed. I guess like a lot of other users here I have only been mining UTC directly and have not updated myself in the ways of mining x11 algo. Note: For ATI cards. Step 1) go here and download the newest SGminer: https://www.nicehash.com/software/sgminer-5.0-badman74-mod-win32.zipStep 2) Make sure you have a new version of catalyst drivers. I heard that the verision 14.7 is the best which is also the one I am using. step 3) Configure your .bat file. This is my settings: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe --algorithm darkcoin-mod -o stratum+tcp://multi2.tumblingblock.com:5000 -u <your wallet address> -p x -w 128 -g 2 -I 17 Open the file: It gives me 4.11 Mhash/s per r9 280x card, I heard some get more around 4.2Mhash to 4.4Mhash. Useful links for help: http://wiki.darkcoin.eu/wiki/Mining_Darkcoin <-------------------Darkcoin mining wiki https://bitcointalk.org/index.php?topic=632503.2040 <------------ SGminer official thread. Come and join the fun in the multipool ! |
|
|
|
This version gives me extra juice. https://github.com/badman74/Binaries/archive/V5_0_mod.zip Asus 280x undervolted gives 4.3 Gigabyte 280x undervolted gives 4.1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe --algorithm darkcoin-mod -o stratum+tcp://multi2.tumblingblock.com:5000 -u <your wallet address> -p x -w 64 --thread-concurrency 8192 --xintensity 64 --hamsi-expand-big 7 --hamsi-short --blake-compact --keccak-unroll 8 --luffa-parallel --gpu-threads 2 --lookup-gap 2 --gpu-engine 900 --gpu-memclock 1350 --gpu-powertune -20 Happy mining Valpe Ok ppl! We need more miners to come to the multipool http://multi.tumblingblock.com/ ! I have now set-up my rigs for the x11 algo and heres the steps needed. I guess like a lot of other users here I have only been mining UTC directly and have not updated myself in the ways of mining x11 algo. Note: For ATI cards. Step 1) go here and download the newest SGminer: https://www.nicehash.com/software/sgminer-5.0-badman74-mod-win32.zipStep 2) Make sure you have a new version of catalyst drivers. I heard that the verision 14.7 is the best which is also the one I am using. step 3) Configure your .bat file. This is my settings: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe --algorithm darkcoin-mod -o stratum+tcp://multi2.tumblingblock.com:5000 -u <your wallet address> -p x -w 128 -g 2 -I 17 Open the file: It gives me 4.11 Mhash/s per r9 280x card, I heard some get more around 4.2Mhash to 4.4Mhash. Useful links for help: http://wiki.darkcoin.eu/wiki/Mining_Darkcoin <-------------------Darkcoin mining wiki https://bitcointalk.org/index.php?topic=632503.2040 <------------ SGminer official thread. Come and join the fun in the multipool ! |
|
|
|
UTC hey Kracko is doing great job for UTC. Atleast we could give Kracko our support. Kracko's pools need miners. To support utc.tumblingblock.com (fee 0% for now) or multi.tumblingblock Valpe I brought a block explorer up as ultrachai.in is has been down. It will be fully synchronized with the blockchain in about 3-4 hours. http://ultrabex.tumblingblock.com |
|
|
|
UTC multipool is working and finding blocks. We could give UTC more support. Hey everybody one rig or gpu or MORE and we get strong support to UTC value. Valpe |
|
|
|
|
Show Posts
