I haven't really seen many bots available that support bitmex. I have tried mixtoco.in and it seems like a new underdeveloped project that doesn't really work. Anyone have any info on bots available for bitmex? preferably ones that have proven profits before?
Thank you all.
I don't have any experience with trading bots, but are you not charged a fee for using a bot or maybe pay a once off fee? Is it then really worth it? its an app and they have a licence to use, not actually a fee A one time payment depends on the trading bots some offer a per exchange license with perpetual updates Thanks for replying.. have you used a bot before? Does it work? Not yet, I am considering one checking, which is which and also seeking same question as if it does work one thing to note, seems the bots must have a knowledgeable trader owner or operator you will be the one to seek effective pairs and strategies or indicators the bot would use
|
|
|
The bears are very much in control of bitcoin prices in this market. The price has went all the way down because of the recent decline in Bitcoin ETF and also the postponed bitcoin ETF in September. We await to hear positive news to see if prices can jack up significantly
No its not It went already down before the ETF Approval and if you would notice seems like ETF disapproval is already expected Price range still back to where it is before Aug22 some hints to consider despite of the badnews, it doesn't go low as expected are we at the bottom yet?
|
|
|
Hello,
I was using Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.9 in miningpoolhub But claymore have a bug and not work in the lastest windows 10 version [Versión 1803 (April 2018 Update)]. There are a lot of people with this problem and not update to the lastest version.
Claymore's not fix this fail.
I wil chekc it several times in severals ring and all works fine in 1709 in not in 1803.
Now I have update all my ring from 1709 to 1803 and claymore not wok.
I recommend all people change the miner program.
Thanks
Roll back to 1709 and you'll be fine. thanks, i tried it and worked fine several months ago. I am working fine since april. I have been waiting 4 months waiting a solution, i think that 4 months is a enough time for fix this bug. I want change my program to mining, i think that claymore isn´t a serious program if have this bug for a long time. Its not a miners bug I can call it a requirement you already tried the solution and worked, so whats the prob? you are free to switch to any miner you like
|
|
|
I have been trading for a while now and wanted to know which one you prefer from the two?
it should be both actually prefer if needed multiple patterns should be considered as well, Triangles,Rising wedge, Falling wedges, Ichimoku, and so on.. patterns are not limited into two only and you must also learn others with its Indicators
|
|
|
are you serious dude ? I haven't done cleaning for over 6 months
https://bitcointalk.org/index.php?topic=4686241.msg42284358#msg42284358All of a sudden mining stopped. Not sure whether the MB or CPU died. When I opened the rig I did see lot of dust. I plan to clean it this week and try running them again. Have any of you tried to call warranty on either the MB or CPU ? Funny, this guy has same username like you That's me only dude. It happened to me with one rig. I did not think that I need to clean GPUs. you need to imagine a GPU heatsink and fans full of dust, it can't cool your GPU's properly feels like a baby suffocated, it may cause overheating if it reach your temp threshold mining and system will stop
|
|
|
What do you think which is the best altcoin for Short term trading? I like to get little profit. That means, suppose I bought a altcoin at 500 satoshi, after 1/2 days I will sell 520/550 satoshi. That's small profit. which coin is better? I also thinking about DCT. What do u think? Share please
I'm afraid no one could ever tell a coin that in half days you could get a profit in todays market condition where blood is flowing you might even risk your money Some people tend to learn TA's to spot some bullish coin, a slight pump, or by short margin tradings for them to make returns on this bear market
|
|
|
Thanks bud waiting for the clocks settings or mod settings done And of course the pictures I believe those numbers. I'm running a little throttled at the moment do to high ambient temps but my MSI 8G 580's are happy at 30mh at 80-85W. It's a two mobo, 9 gpu ''garden'' pulling 1150 at the wall.
if you could also post some pictures and clocks settings might be really much appreciated bro sure thing power saving is one of the most important goals on todays market
|
|
|
Colleagues, tell me what bot to choose? Requirements: 1) Inexpensive or free 2) Manual setting of moving take profit and stop loss 3) Exchange Binance 4) the Security
Numbers 2, 3, 4 would be a default to a decent trading bots however if you choose number 1, it compromised either one or all of those remaining numbers Support is one of the considerations you should undertake and look for positive feedbacks
|
|
|
Holding cryptocurrency is no good because it means you don’t have a knowledge about trading,
Telling everybody that dont do trading a no good is also a no good Looks like, you just entered lately in a crypto world bud if you HODL a 10$ eth Jan 2017, say this again.. for me, you can do scalping trading and increase your holding by it and gain profit.
easy to say huh.. forgetting something, that you could also lose your money and couldn't gain any for trading than HODL Well you didn't get my point. You can do more in scalping, you can increase your holdings and secure the profits. Remember back on 2017 there is no such thing as HODL so I am referring to the current situations now. Do you know the basic trading fundamentals? If yes then I believed that you can increase more rather than keeping your token and waiting when it will go up. Keep in mind what basic trading fundamentals and learn it so that you'll get my point. Well I do get your point don't get only on one side bud basic fundamentals trading is not a guaranteed profit even an experienced traders also got rekt so telling people to not HODL and just trade is a lame
|
|
|
My rigs have only XFX cards, had bought from others vendors, but sold all others cards after few days.
My rigs: XFX RX 580 8GB Samsung = 31 mh/s 95W XFX RX 580 4GB Hynix = 30 mh/s 90W XFX RX 570 4GB Elpida = 30 mh/s 95W XFX RX 470 4GB Hynix = 30 mh/s 95W
Saphire it's good too, so go with XFX or Saphire.
I think you really need a power meter not just reading GPUz data This is from the wall, not GPU-Z. Care to share your clock settings or mods done? or some actual pictures taken from the powerwatt wall Im just amazed on achieving those power figures for such hashrates at least if its really possible then there is somethin that I could look up to achieve
|
|
|
Holding cryptocurrency is no good because it means you don’t have a knowledge about trading,
Telling everybody that dont do trading a no good is also a no good Looks like, you just entered lately in a crypto world bud if you HODL a 10$ eth Jan 2017, say this again.. for me, you can do scalping trading and increase your holding by it and gain profit.
easy to say huh.. forgetting something, that you could also lose your money and couldn't gain any for trading than HODL
|
|
|
Yeah, a nice move from manipulators they've done it while Bitmex is in maintenance mode no chance for shorters to close their positions result, a yummy REKT Clap, Clap Next time, we now know any consequences on this type of movements
|
|
|
Its not as easy as you think The high volatility may REKt you Learn, study and master some indicators start with minimal amount and build confidence some folks spent amount of time to fully understand how this crypto world moves Some were left, and others stay and burn some coins and continue learning
|
|
|
Whatever you do keep it rational... no more than 2-10X.
Or set your risk management, as Always its a way more safer and adds confidence set your stop limits Sure thing this ETF news will give a D*mn something
|
|
|
I am not a professional miner, I just want to learn how to do it, to mine bitcoin. I was wondering when it was best to buy mining equipment. Perhaps now the bottom of bitcoin and the best time to buy equipment, is it?
yep you bet, this is one of the best time to buy a rig its logical that price would be at its lowest in bear market as its also low on demands due to mining profitability however, this threads are for GPU's Bitcoin is for ASICs
|
|
|
Because, Windows may have important security updates, which if you miss to install, may leave your system vulnerable and prone to malicious attacks.
It's been a year since I disabled the update until now it doesn't have a critical problem about it, as long as the Rig is only installed, what is needed for mining (claymore, GPUZ, atikmdag) is likely not to happen. but for this, I agree It's better to set them on Manual.
When you do Sh*t things other than mining, you might need an update and so is true to your AV's not against of it, however some major updates really F*cking up drivers its a main goal to keep mining without interruptions and if rigs is only dedicated to mining then no worries
|
|
|
that Zippyshare is so messy and couldn't even download or view start.bat, those ads are so freakin irritating
Apology, I don't have patience on dealing with those ads
if you could post it here then its a worthy pleasure mate
Sorry, I thought that the zippyshare is a good hosting. Here is the start.bat setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool ssl://us1.ethermine.org:5555 -ewal 0x724070f1739b0C48f8862EDC34de71bc61902e6c -epsw x -mode 1 -checkcert 0 And here is for epools.txt # WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# POOL: eth-eu.dwarfpool.com:8008, WALLET: 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorker, PSW: x, ESM: 0, ALLPOOLS: 0 # POOL: us1.ethermine.org:4444, WALLET: 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorker, PSW: x, ESM: 1, ALLPOOLS: 0 # POOL: coinotron.com:3344, WALLET: YourUserName.YourWorkerName, PSW: YourWorkerPass, WORKER: , ESM: 2, ALLPOOLS: 1, ESTALE: 1 # POOL: us-east1.ethereum.miningpoolhub.com:20535, WALLET: YourLogin.YourWorkerName, PSW: YourWorkerPass, WORKER: YourLogin.YourWorkerName, ESM: 2 Mate, your .bat is fine tested on one of my Rig https://imgur.com/LfqQez6https://imgur.com/jAIqakQtake note that I add an index -di option as my rig is mining in other pools with other gpus are you using the latest version of Claymore?
|
|
|
that Zippyshare is so messy and couldn't even download or view start.bat, those ads are so freakin irritating
Apology, I don't have patience on dealing with those ads
if you could post it here then its a worthy pleasure mate
|
|
|
Doktor83 (the dev of SRBminer) noticed (after a lot of whinging by some noobs) that by submitting stale share the reported hashrates on some yiimp-based pools actually increased noticeably so he added the feature that could be used in the command line (-sendallstales).
The -sendallstales feature looks like something good to try out and experiment with. I'd be happy to post findings here. Problem is the miner is for CryptoNight. Is there possibly an equivalent feature for this on Claymore's or other ETH miners out there? Thanks! Yes there is from the first page of Claymore Eth miner with this option "-estale send Ethereum stale shares to pool, it can increase effective hashrate a bit. Default value is "1", set "-estale 0" if you don't want to send stale shares."
|
|
|
|