1. No general addresses. All payments will go directly to shareholders from the pool. Trustees will monitor this process. I have given access to these people: auto2nr1 and RoboCoder.
2. 1800 GH/432 shares = 4,2 GH/share - without overclock and comissions (3% - pool, 2,5% - pido fee, 1,41% - electricity).

All miners on work.

Hi! Some news.
1. Mining started in the pool https://ghash.io/. Statistics you can view using the guest account and password pidoGroup:FYZ5p9iALs. At the monent total speed - 1,2 TH with 4 miners. In few hours (2-3) will be full speed with 6 miners. I will give an account with full access to a trusted person . The reserve pool is set to Eligius (16hCZ4G3twc93nMZKQQe9TXftcy1i5rvJc), because btcguild have high ping with my location. Tomorrow will be the first payment.
2. Power of one triple unit is 500 watt. Thus, we get the power consumption of 1.67 watts / gigahesh. According to the calculator https://metabank.ru/#, with 100 GH/s on the current difficult income profit of 1.86 BTC in 7 days. In this case, total power consumption in 7 days will be - 0.167 kwatt/h * 24 h * 7 d = 28,056 kwatt. The cost of electricity is 0.11 cents / kw. At week - 28,056 kwatt * 0.11 cents / kw = $3.1. As a percentage of the amount profit at the exchange rate of  MetaBank (118 $/BTC) we have: 3.1 / (1.86 * 118) * 100% = 1.41%. This percentage of the amount profit in BTC will be applicable as electricity fee. This percentage will vary each recalculation of diffulty, or whenever a major change of rate Bitcoins.
3. In the next two days may momentarily reduce speed. We need to update the firmware on the all devices, replace a one failed power supply and one RasPi and make voltmod test on the one device. Also, tomorrow I'll try to post photos.
Thx.

Hi!
Mining will start in about 18-20 hours on ghash.io (btcguild - reserve pool). This is a private pool, and statistics on individual users is not available.
When begin mining I will give to trusted shareholders  account access. In the theme will be posted screenshots. Payments will be on Saturday.
I suggest to choose Tobi and Danielle, auto2nr1, Nuddi, RoboCoder as trusted people.
I'm also willing to listen to your suggestions for the optimal organization of the work process.
Thx!

For starters i will do voltmod on 15 PCB and I will test it a few hours. If there are no problems, the voltmod will continue.
According to the russian consumers, voltmod strongly increases power consumption of devices. We have a triple device and there will be a few in the same room. Therefore, the temperature can limit the overclocking. But the effort is worthwhile.

Same news.
1. Reduction hashrate of devices on 20% and late shipment (MetaBank sent our devices last of all) will be compensated by metabank. Most likely it will be shares on the stock exchange cex.io. More information will come later.
2. With your consent, I can do voltmod with devices to get a 15-20% hashrate increase. In the case of overclock we will lose the 1 year warranty. If you agree, then I can start doing voltmod on Saturday or Sunday. If you agree with voltmod, write "agree" in the comments to your nickname in column A https://docs.google.com/spreadsheet/ccc?key=0AkwpY6JRicSddG96ZW9sbzhoMFoyT0xLWFVjOFR5LWc&usp=drive_web#gid=2
3. Those shareholder who have 72 shares (1 full devices - 300 GH/s without overclock) receives an individual account at the pool with full access. At the moment is 1 shareholder. But you can team up with someone and having your own personal account with full access. The other sgareholders will be work at the general account. We also need a trusted shareholder, which will have full access to the general account. Access to the account, and other information I give on Friday or Saturday. The first payments will be on a Saturday or Sunday.
4. My fee for 3 months is 2.5%. On Friday I will spend energy metering devices. The approximate power consumption - 1.5 watts per gigahesh without overclock. With 0,11$ - cost for energy we will have near 1-1,5% fee for power. More accurate calculations I will do on Saturday.
Thx.

Were you satisfied with my commission reduction to 2.5% for 3 months?
This, of course, does not compensate for all losses, but still.

This holds true. But this will only be a punishment to me. Shareholders do not feel the benefit, I think.

A few updates.
1. About delivery. The issue of compensation delivery was settled with all customers on an individual basis.
2. About hosting. There are no any ways for a quick start hosting and compensation to shareholders (you can offer their own versions in PM and we make a solution). I do not have a people who would want to take the asics to the hosting in my town. On the forum, nobody has offered me a place quickly hosting at home. Besides, I do not see how a new owner of hosting can start hosting for all the devices before a week. Thus, hosting service will likely work 11 October. Who still does not have its own address for payments, please write them in a personal message https://docs.google.com/spreadsheet/ccc?key=0AkwpY6JRicSddG96ZW9sbzhoMFoyT0xLWFVjOFR5LWc#gid=2.
thx.

1. Devices were not packed in any box. They were wrapped in plastic sheeting. To send the device to customers, it was necessary to remove plastic sheeting and sort device. At this point revealed that there were only 9, and this tripple devices.
2. My friend not able to host.
I understand that you're frustrated and extremely angry. But I will not run away from our conversation. Come in any time in my city and take away your PCB.
This is extremely inconvenient and unsafe to send the device across Russia. And time. Delivery from me to St.Petersburg may take 3-10 working days. Imagine that. I'm sending you a device that you later detained at the border and you have a document that I have used your device for illegal exports. In the end - I partner smuggling. I do not need these problems.
But for you I'll make an exception. Come to any city and I will send you your card to any hotel fastest courier. Next transporting smuggling across the border. Pay delivery by curier and my commission on general terms. I do not mind.

Hi! I have for you expected and unexpected news.
1. My trustee man went to some transport companies and tried to send the devices to customers. In the companies he have requested documents on the devices in the form of a license FSB (KGB) Russia (similar to the FBI in the U.S.) on the export of cryptographic (sha-256 devices). You can find regulations about licensing Russia devices sha-256 by clicking here http://clsz.fsb.ru/docs/gov/notif.htm.  The base of sha-256 devices which have a license of FSB  is here http://clsz.fsb.ru/docs/gov/notif.htm.  There are only some FPGA devices and no one ASIC devices.  MetaBank and I have no license of FSB for the devices and I cannot send it to you without breaking the law. A person who transports these devices across the border without a license may have problems with the law in Russia. In this regard, we will be doing in refund in MetaBank. Today I could not get through to MetaBank. I wrote him by e-mail, and tomorrow morning I will call again and again. Who ordered the delivery PM me BTC address for return shipping cost and my fees. This is the expected news.

2. Today I found second, unexpected news. We were received only nine triple devices. I do not know how it happened. Maybe there was confusion at the assembly our order, but I have repeatedly reminded to metabank about the right amount of devices: 5 - triple, 3 - double, 6 - single. But for some reason sent nine triple devices. In this regard, if you want to pick their own devices, I will give you only a board without case,  raspi, the power supply and motherboard (it can be done fairly quickly in any electrical shop).

3. About hosting. My friend in St. Petersburg dont want to mess with this "headache." There are people who write to me in personal messages about the readiness to take part or all of the devices for hosting. I'm willing to give them the devices. But only if they are ready for local pick up in  Barnaul with the presentation of the identify documents and a receipt, which will remove from me the responsibility for this "heavy burden." Just as improper device I will not send anyone. Russia - this is not Europe. Here, a "lot of that is lost to nowhere". I'm not ready to take on this responsibility. As for me. I can just skip the last day of training camp - Friday October 11, when the debriefing of training camp. Even if I fly on a plane home, the device can only run on Friday evening October 11. Previously, does not work.

Hi! I live in Barnaul. Altai region.
Of course, you can come and pick up your devices in my town.
Tomorrow will be an attempt to send the unit. If it is fail, I will request refunds.
About hosting. Perhaps the device will be transferred to another person from St. Petersburg. Tomorrow, he call me, perhaps, on Tuesday he will take all devices. I will write more in detail about it tomorrow after our conversation. I understand your concern and frustration. Of course, we are missing a good time to make a profit, but other than we have so many people who are also suffering losses at the present time, for example it's customers at KnC. It is little consolation, but still.

Hi! The devices received yesterday. My trusted person - a person who took the device for me, only. He does not have access to my home and can not include all asic in his apartment. According to reports of people who received the devices, even one asic can not be held in the living room because of its noise. Therefore it is necessary to look for another way for hosting. The best option for me and for you is hosting by another person. I can transfer devices to any person who opens the hosting for you before October 14. Where to find this person? If he would come to my town, show to my trusted person a document proving his identity and take the device itself, I will be only too pleased. In my town there is a man who ordered for hosting some devices - he is fsb4000. The best option - is to give devices to him. I wrote him a message, waiting for his reply on the forum. You can also come to my town and pick them up in person and try to move across the border, if you bought a complete unit. I understand your concern. The rapid growth of difficulty no hope for the return of price for devices in bitcoins. But if the growth in exchange rates will be, even with a late start of hosting devices must pay off and generate income. I believe in it.
About shipping. On Monday, my trusted person will try to send the device through another shipping company. If legitimate ways of sending device is not, then I'll do a request for refunds.
If you want to talk to me on the phone and know the Russian language, I can give my phone number. Write a personal message.

Hi! Important update.
1. Parcel from MetaBank will come to my town at the end of this week (Friday or Saturday). This is good news. Then there would be bad news.
2. Since September, I'm on a business trip outside the city and I will have to stay there until October 14. Thus, self-pick it up I cannot. Perhaps the trustee man will collect the parcel. If he will be given parcel, then on Monday (September 30) he will send the devices to customers who paid for shipping. The devices that were bought for my hosting, will be launched after my arriving home.
3. I know the situation that has arisen with BitCentre. After receiving devices, trustee man consults in the transport company (not DHL) about the possibility of sending this technology abroad. If he cannot find legitimate ways to send devices, the refund will be made or whether the devices will be used for my hosting. On this issue, I will write in more detail on Monday, if trustee man will be given a parcel.
Sorry for this double fail! For faster response to your questions better write them via email or Skype.

Hello! I confirm that nemercry have 8 shares (40 GH/s nominal, but in real 32 GH/s) in group buy!
Thx!

Yes
100-110 Gh/s

Our order will be sent next week. The devices will be supplied without a power supply, because they do not fit the American and European standards. I have all the addresses for delivery.

I do not know why MetaBank does not comply with the order of issuing units. Fly to Moscow and get the device personally I can not afford since I am on a business trip. In any case, I do not think that my trip to Moscow would speed up the process of delivery. I'm not surprised that BitCentury was able to get all of the devices now. He's been doing this professionally. I do not have that opportunity.Yes, we will have less profit than other metabanks investors. But that is no reason for concern. Please be patient.
We could choose when ordering Pickup too. But I do not think it will be much faster.
The exact date of shipment of devices is unknown. I called MetaBank 3 weeks ago and I was informed that our order will be shipped in the first week of September. Shipments in the first week of September was not. I called MetaBank week ago. I was told that before September 20, they shipped everything, but at the moment I do not have shipped.

Because the ROI < 1 in BTC