Latest posts of: sp

Smart miners mine with the sp-mod and support my further development.

Here is skunk at yiimp:

More than 50% of the skunk hash is sp-modded...

I am working on Skunk #6. Look's like 35MHASH is possible. ccminer 2.1 does 35MHASH on the gtx 1080ti, so my code will turn your cheap 1070 card into a 1080ti.

With proper settings your gtx 1070 should be able to do this with the released bins (sp-mod 5):

Since my work has been stolen and spread, I will include a 2% fee in build #6

I don't buy 1080 or 1080ti cards. The 1060 3gb and the 1070 cards are best for mining.

Count the pins on the satacable. If your cable has a 6pin connector to the psu and 4 connectors, they only deliver 75watt / 4 each. (18.75Watt). I normally don't use more than 2 risers on each of the cables from the psu.

Quote from: D8V1D on July 29, 2017, 01:08:28 AM

7 x 1080 TI FE

0.12 KWh
BTC 2775

DNR 0.000150
100% - 819 MH/s 87.6 DNR = $36.46 - 6.03 (2093 watts) = $30.43 per day
70% - 748 MH/s 80.0 DNR = $33.30 - 4.00 (1390 watts) = $29.30 per day

96% of the profit come from the first 70% TDP.
People running at 100% are basically wasting 703 watts of electricity.
Not including the extra cooling cost to run at 100%.

SIGT 0.000012
70% - 336 MH/s 1220 SIGT = $40.63 - 3.92 (1360 watts) = $36.71 per day

*DNR calculation are ruff estimates based on the earnings from the past 5 hours of mining.
Watts are measured from the wall.

You got 117MHASH per card with the tribus sp-mod #1 with 100% tdp on the shitty 1080ti FE cards

What are you getting with sp-mod #2?

The price of Denarius has gone up 47% to 0.000221 BTC.

The 4 pin power connector only supply 150W of power. At 110% tdp your card might draw 200Watt. Then your motherboard must supply 5*50watt of power. This is only possible with powered risers. If you use risers with sata plugs, these are not able to deliver 50Watt. The limit is 45 watt..

Make sure the PSU and risers can handle the extra load and heat. If not reduce the tdp.

-500 on the memory to save power. With lower intensity (-i) you can clock higher.

ccminer 2.1 does 45MHASH. same clocks, launch config and tdp. so it's +10MHASH

Quote from: Amph on August 06, 2017, 06:51:16 PM

btw is the spreadminer 13 giving more hashrate or just fixes?

#12 was abit slower than 11 but in 13 the speed is back up again. 12-13 also have a fix for multicard rigs so you will find more blocks.

Quote from: strannik951159 on August 06, 2017, 06:05:11 PM

Quote from: sp_ on August 06, 2017, 05:42:31 PM

The nist5 algo is used in other coins as well.. Zpool.ca is currently paying 0.01602 a ghash of NIST5 with 6 coins in the pool. (19 GHASH net hashrate)

current profit for the gtx 1070 with the unreleased sp-mod #1 is (53MHASH)

0.01602 * 0.053 * 3269 = $2,77557714 per day

but if you mine the coins yourself and exchange them you don't loose 30%. (zpool's hidden fee)

And where can I get it or download it?

It's not done yet. I think I will take the usual 0.05btc + 2% fee. I am hitting 55MHASH now..

Quote from: pokeytex on August 06, 2017, 05:44:50 PM

@Sp - I am getting a lot of virus flags on the last skunk-5 and spreadcoin-13. What has changed that they would flag so much? Your previous versions never set off my Avast. Please advise.

Just checked in virus total. If you do a reanalyse of the old exe files, they get more hits as well. Spreadminer 12 had 3 hits on release and now 10 hits.

Usually generic bitcoin miner warnings. My bins are safe.

Quote from: Amph on August 06, 2017, 05:03:19 PM

net is too high, emission too low, not worth it like with signatum, waste of time

Quote from: ajeef1234 on August 06, 2017, 03:32:31 PM

Quote from: sp_ on August 06, 2017, 03:29:48 PM

Quote from: ajeef1234 on August 06, 2017, 02:51:04 PM

can you do a miner for 382.53?

I will make a cuda 8.0 build and send out soon.

thanks

I have sendt out the cuda 8.0 build of tribus sp-mod #2.
I also added bugfix for the slow start of the cards when starting the miner and switching.

Did you try 100% tdp, -500 on the memclock and +200 on the core? and -i 25 in the batfile. With this setting I get 18.5-19 MHASH on the gtx 1060 3gb (sp-mod #5 fixed)

Quote from: ajeef1234 on August 06, 2017, 02:51:04 PM

can you do a miner for 382.53?

I will make a cuda 8.0 build and send out soon.

did you upgrade to the latest driver? 384.94?

Quote from: ajeef1234 on August 06, 2017, 02:14:34 PM

p106-100 384.94-385.12 can't use MSIAfterburner
384.76 can't install

Check your email. I have sendt another archieve with the missing dll. You might be able to run it on the 382.xx driver.

These are new coins here are the announcement threads. New coins are a bit risky, but with abit of luck you can make $30 per card per day.

No pools , and no gpu miner (that I know of).

virta-unique-coin:

https://bitcointalk.org/index.php?topic=1966621

coimatic-2:

https://bitcointalk.org/index.php?topic=1961830.0

Quote from: Arny11 on August 06, 2017, 01:51:13 PM

I`ve installed 384.94. Mistake with cudart32_90.dll again. Win10x64. Whats wrong???

Ok. I will send out a new build with the missing file included.