start after 30 minutes. Where is wallet? I dont fogget it(
1 hour 24 minutes 1hr 18 min Hi Shadow_Runner ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Can someone please post a NIST-5 miner, I have read that there is a Killer Miner too that increases hashrates for any algorithm that uses Groestl in it.
Not much left for rent! https://www.miningrigrentals.com/rigs/nist5Better use your own if you have some. My rig is there 60mh/s for 55mh/s price. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
Ok....must be having a brain fart today. Setting up a .bat file for running nicehash. Solo mining runs fine for x11, but I'm having trouble with quark. Comes up telling me workio thread terminating. Would somebody else that mines on nicehash mind showing me a sample of a Windows .bat.
Thank You
edit; Hmmm....I can't try GPU mining with a 750Ti 2G? Really...what am I doing wrong today? Today is almost over and I want a do-over! OHH...duh! ccminer doesn't do scrypt. sheesh....I think I need some beers!!
edit; Anybody ever get a stable OC for the 750Ti above 1400Mhz? If so, clue me in. Best I have is 1400MHz GPU /w 5300 MHz Mem.
The 750ti oc sweet spot on gpu 1350 mem about + 80 for ccminer.
|
|
|
nead help, wallet don't sync pleas help me ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Did you put the nodes in your conf file. If so then read on the thread for newest nodes and maybe try version 8.3.14
|
|
|
@sp On release 49 before your lastest changes I'm getting about 1 mh/s more on my 750ti rig about 6.2mh/s per card oc. I need a windows compiled r49 7z zip file with your last minute fixes and hashrates please. Thx Here are a some beers. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) .05 BTC TrxID: 8c80858b6e9fe953cfa6fc68eaeaa8574bb5253805291be39cf100370a40d68c
|
|
|
New world record for quark on the 750ti ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) yaamp.com:4033 quark block 1621936 GPU #1: GeForce GTX 750 Ti, 6992 GPU #0: GeForce GTX 750 Ti, 9895 GPU #0: GeForce GTX 750 Ti, 8825 GPU #1: GeForce GTX 750 Ti, 6487 -g 5 -i 22 standard clocks. @ sp Do you have that compiled for windows 8.1 And if I don't use the -g -i ect and just oc will I get about the same results ? Thx ps It's time to donate again. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Yes. I need some more beers:) Works in solomining. Low rates on the multipools because of a stratum/nounce bug Do you have that compiled for windows 8.1? I mean the r49 with those updates.
|
|
|
New world record for quark on the 750ti ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) yaamp.com:4033 quark block 1621936 GPU #1: GeForce GTX 750 Ti, 6992 GPU #0: GeForce GTX 750 Ti, 9895 GPU #0: GeForce GTX 750 Ti, 8825 GPU #1: GeForce GTX 750 Ti, 6487 -g 5 -i 22 standard clocks. @ sp Do you have that compiled for windows 8.1 And if I don't use the -g -i ect and just oc will I get about the same results ? Thx ps It's time to donate again. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Rig is setup to go. Good luck. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Coins stuck inside old wallet. Any idea how to swap to wallet version 2 or version 3 ??
i think your a bit late, if you didnt participate in the swap, then youve lost ur coins unfortunately. If they're stuck and if you cant do anything about it..don't throw them away. There maybe something new coming up. But try to get them to new XDE by all means.
|
|
|
My PNY 750 ti quit today. Computer won't boot unless I remove GPU. Anyone else have this problem or know what may have failed, and/or is it fixable? Thanks for suggestions.
Yes that happened to me...card failed. And I consider it dead.
|
|
|
yes Coin will relaunch tomorrow?
Please put up a countdown timer. Thx
|
|
|
It would be much appreciated if someone can confirm as to which algorithms/miners are supported by my Compute Capability 1.1 GPUs such as 9800GTX+/GTS250. I've tried mining x11 w/ Cudaminer& ccminer on 340.52, the latest driver w/ support for my GPUs but unfortunately, GPU utilization is ~ 1%, making Scrypt my only viable yet unprofitable option.
Thanks to anyone in advance for offering their help!
Goto OP and download cudaminer-2014-02-18.zip [32+64bit version] (7.1 MB) also runs on Maxwell And read the readme file it will show some coins that are mineable. And goto this thread for ccminer https://bitcointalk.org/index.php?topic=826901.0But I don't think ccminer will work on Compute 1.1 not sure .. ask there.
|
|
|
Yes it's in the same folder and I'll try to understand what you just posted and give it a try. thank you myagui Ps What do you use?
When I'm mining straight for BTC, I just use MinerControl: http://cryptomining-blog.com/tag/miner-control/It may take a while to fully configure, but I think that it is definitely worth it, for the ease of use (basically, set and forget). MinerControl takes care of switching between what is paying the most, and also switches when a pool is dead/offline. When I'm mining a specific coin, I use a batch file with a single call to ccminer. I don't ever have a crash, so I never cared to make a looping system. This configuration does not include a backup pool though. I babysit my miner when I'm not using MinerControl. Here's what I'm running right this instant: @echo off C: cd "C:\1. Cudaminer\cudaminer-2014-02-28\x86\" C:\Windows\System32\cmd.exe /C start "CACHE GPU-0" /HIGH /AFFINITY 0x5 "C:\1. Cudaminer\cudaminer-2014-02-28\x86\cudaminer.exe" -a scrypt-jane:CACH -o stratum+tcp://cach.catcoin.cz:3333 -u <user.worker1> -p <password> -i 0 -L 8 -l t64x4 -b 4096 -m 1 -q -d 0 C:\Windows\System32\cmd.exe /C start "CACHE GPU-1" /HIGH /AFFINITY 0xA "C:\1. Cudaminer\cudaminer-2014-02-28\x86\cudaminer.exe" -a scrypt-jane:CACH -o stratum+tcp://cach.catcoin.cz:3333 -u <user.worker2> -p <password> -i 0 -L 8 -l t64x4 -b 4096 -m 1 -q -d 1This batch file runs 2 concurrent cudaminer instances - both get launched at the same time - as it is using a "start" parameter. The point of using 2 instances is to have a separate worker for each GPU, which improves the reported hashrate for this pool/algo. This launch type also let's you easily tweak priority/affinity settings, which is useful in certain instances (and specially if you are also CPU mining). IIRC, I had to set the shortcut to such batch files with the "run as administrator" option enabled, otherwise priority and/or affinity would not stick. Thank you myagui. I downloaded KBomba's miner control some time ago and didn't set it up yet. And my main concern is a backup pool right now. Looking at your info now and thx for your time helping me.
|
|
|
I'm assuming that your launch batch file is placed on the same folder as the ccminer executable. For sake of example, let's say that ccminer.exe is stored in this folder:
c:\miners\ccminer\release99\
So your batch file would be right alongside ccminer.exe (placed on the same folder), but for completeness, you would call the executable with a full path string, like so:
:loop c:\miners\ccminer\release99\ccminer.exe -r 1 -R 5 -a quark -o stratum+tcp://anypool c:\miners\ccminer\release99\ccminer.exe -r 1 -R 5 -a quark -o stratum+tcp://anypool goto loop
So now just replace c:\miners\ccminer\release99\ from this example with whatever is the actual location of your executable, and there you go. No clue this will help at all though, just a quick experiment that cannot hurt.
If you want to place the batch file in a location separate from the miner executable, you can just add a folder navigation command at the loop start, like so:
:loop cd c:\miners\ccminer\release99\ c:\miners\ccminer\release99\ccminer.exe -r 1 -R 5 -a quark -o stratum+tcp://anypool c:\miners\ccminer\release99\ccminer.exe -r 1 -R 5 -a quark -o stratum+tcp://anypool goto loop
You might need to tweak the path strings depending on how long your folder names are, or if there's any spaces on them. Adding one more example in which one folder name is using a space - note the added quote symbols (")
:loop cd "c:\miners\ccminer\latest release\" "c:\miners\ccminer\latest release\ccminer.exe" -r 1 -R 5 -a quark -o stratum+tcp://anypool "c:\miners\ccminer\latest release\ccminer.exe" -r 1 -R 5 -a quark -o stratum+tcp://anypool goto loop
Yes it's in the same folder and I'll try to understand what you just posted and give it a try. thank you myagui Ps What do you use?
|
|
|
@tbearhere:
I'm not using loops myself and I don't have any crashes, but seeing as the error message is that 'ccminer.exe is not found', have you tried adding the full path to ccminer? Could be that the crash is somehow messing up the set working directory for the batch file. If you are already using the full path at launch, then the suggestion is moot. The result would be something like:
:loop <somedrive><somefolder><somesubfolder>\ccminer.exe -r 1 -R 5 -a quark -o stratum+tcp://anypool <somedrive><somefolder><somesubfolder>\ccminer.exe -r 1 -R 5 -a quark -o stratum+tcp://anypool goto loop
Good Luck!
@myagui I'm very amateur at this. Could you explain more on <somedrive><somefolder><somesubfolder>\ please? Thx
|
|
|
Trying to figure out why ccminer doesn't crash on this computer but does on my rig when stratums go down and I have a 2nd pool backup and it crashes at the goto loop command . I just noticed that one card on this computer is the super clocked factory setting no oc needed is on the mobo and it stays at 1350 750ti sweet spot. So overclocking may be part of the problem. But it still shouldn't crash IMO.
:loop ccminer.exe -r 1 -R 5 -a quark -o stratum+tcp://anypool ccminer.exe -r 1 -R 5 -a quark -o stratum+tcp://anypool And it crashes right here at the goto loop and says ccminer.exe can't be found. So it freezes right there. goto loop
And if I click off the notification only it starts mining again without manually restarting ccminer.
|
|
|
Just replace the bios with the gforce black bios. Same cooler, same power setting, more hash
How do you do that sp? Thx Extract the bios from a gforce black. Flash it on the windforce (GV-N75TOC-2G) Thanks sp...I looked on my rig ( has 4 black editions ) and they are hashing at a higher rate then the other two GV-N75TOC-2G cards..same oc. Ps Could you please look into what is causing us not to do round robin bat files with ccminer that keeps on crashing. We need backup pools in the bat file ect. It appears to be in ccminer itself. With cudaminer we can also do this a timer but need it for pool backup. :start cudaminer.exe -l T5x24 -o stratum+tcp://nyan.mining-pool.co.uk:3336 -u me -p x -d 0,1,2,3 --time-limit 300 goto start Thx
|
|
|
|