ccminer-x64 -a bitcore (version 2.0++) works perfectly for me.
There is no such thing as 2.0+++, what is the version ccminer --version What pool? Suprnova.cc says to download sgminer, there are only two active pools, but the other only pays out weekly, and does mention ccminer, but the port is 1111, I think your full of shit, u keep posting the same thing, ccminer -a bitcore, there is more to the cmd-line than that I have tested the software on 4 different systems and the results are the same U don't mention, r u running on solo card, cpu, or rig? I'm going to assume your running on CPU mode, cuz that works, but I think your full of shit, and haven't ran anything, your just posting what you saw on internet The thing is NOT a single person here on this forum is ACTUALLY mining BTX, |
|
|
|
Some people tend to ride in Mining boat even has limited or specifically no knowledge about basic PC troubleshooting/technical aspects.
What they could possibly do is to hire or seek help from friends or relatives to do the dirty job.
Are there any people here succeed on this setup? There might be some newbies who plan to join the tide, and this might be a good reference if they could at least know the success rate on mining for them.
Have U tried dentistry or surgery?? I highly suggest you let friends have you operate on them or do a root-canal on them,and then if the patient didn't die,you will know your ready for this hobby. U can't do shit on ONE CPU or GPU, minimal is a RIG, minimal cost for a rig is $1500 USD ( figure 6 gtx1060-6 ), then consider spending $100/month for power, then consider making $10/day less $3 for power, This is a hobby that pays $7/day, is this really what you want out of life? Again, do some abortions on 14 year girls, and save your money, and then buy an entire warehouse of gpus. *** MINING investment $1500, net $7, or $210 month payback is 7 months, then your rolling in $200/month, in a third world country like africa/india, u will be doing good, in USA, that will not even get u laid on one night date. If U want to mine, first go live in 3rd world country where ppl earn $3/day, then U will be RICH. |
|
|
|
|
I always wonder like right now for a 6-1060-6 rig NICEhash-equi say's $13/day,
Now I have tried both on zen.suprnova.cc right now if I mine, I get $12, just like they say ( actually I'm getting $18/day today )
But on Nicehash, I get about 0.0001 BTC ( account gimmick per day ), the payout everyday at 5pm, but my 0.001, is never over the 0.0015 they require, so my earnings for that day dissapear, after 'x' days I quit no payout,
They say you can provide your own BTC-ADDRESS where you have the priv-key, but I never see that ( I have spent much time search for this magic choice ), their BTC address they give you when you create an account IS NOT A REAL BTC address its a FAUX accounting key they use,
They also tell U that any money not paid out is flushed to them every 30 days, but I have never managed to get a payout ever, When I google "payouts" everyone say's how great, how they get payous in PAYPAL, and how they can pay their electricity or go the company store at NICEHASH and buy more HW.
NICE HASH IS A FUCKING SCAM
Do they own whattomine.com?
I think so, cuz I know the fees at nicehash at 50% so when whattomine.com shows how much U get paid, that's before fees
WhattoMine.com is feeding bullshit to its users, the NICEHASH is PAID ADVERTISING
|
|
|
|
Good stuff in this thread, I needed the laugh. I thought you were going to be rude for just the start of the post, but no, had to make sure that point was made.  New guy - *I'm new, let me come to this forum and ask the community for free advice on how to make money.* Experienced member - "I think what you are doing is a bad idea, you should probably reconsider your plan." New guy - "Shut up, I know what I'm doing. Now help me." Please new guy, be like me. Chill out, read a whole bunch and then read some more. Take your time, don't waste your money out of ignorance. too funny noob-zero, flaming a noob-one this is rich, me thinks, both u bots work for the same shiil company, probably nicehash if I had to ask, the first rhetorical answer here, is "If your even contemplating nicehash, your a fucking idiot". "HOw much hash does my 1060-3 get", well that depend on the ALGO, pray tell ""what is an algo", this is where it gets rich, Our noon-1, didn't mention the nicehash-algo, funny like it mattered, he tells us he ran his system at 93C to earn 0.000000001 BTC on nicehash, again so fucking rich, to be paid out in 10,000 light years. Too fucking funny are these nicehash bots trying to ripoff idiots trying to get rich 'mining' |
|
|
|
.00015202 BTC per day nice hash That means if you leave your shit running after 100 days you will qualify for a 0.01 payout, where you will be told that you must have to wait until 0.015 for a payout, then after another 50 days they will tell you that you can cash out your BTC to paypal, but they get a 50% fee. FUCK NICEhash laptop is for testing Your 1060-3 should get your 280 sols/sec ( equihash ) Maybe 10MH/S ( ethash ) if your lucky Right now equihash is best, so U mine hush, you will get about $2 day, but paid out daily on hush.suprnova.cc NICEHASH doesn't pay out bitcoin, they use BTC as an accounting number, when you finally force them to payout they give you choice, shopping at their store, or cash at paypal The ppl who really get fucked by nicehash are the people paying REAL BITCOIN for losing money on mining. Lastly, I might add that yes your 1060-3 can make $2/day but it will burn that in electricity cost, so you net ZERO Mining doesn't pay unless u have a rig of 6-1060-3, but NOW your talking a $1400 USD investment, to make $5/day  |
|
|
|
ccminer.exe -a bitcore
http://ck.kolivas.org/apps/cgminer/btx.suprnova.cc is telling u to download cgminer ( precompiled ) from this site but this is a nortorious site for viruses I already new & old ccminer and it doesn't work -a timetravel or -a bitcore, I also have my own cgminer, but these are 2+ years old so they will not support current gpus to top performance, Sound likes the 'timetravel' machine takes you back to 2011 software, what good does that do now? This is all a joke RIGHT?? I just a MLM/ICO coin that can't be mined. PROBABLY an be CPU mined cuz its mostly old skook algo's like blake that are actually used. |
|
|
|
The link is down. I think BTG is a scam. Believe no one.
Its a SCAM and anyone that say's otherwise is PART of this scam. |
|
|
|
Im mining on suprnova.cc its super fun it reminds me of the good ol days, got .25 BTG so far in around 48hours now that I pointed my AMDs at it also.
heres my startup batch file start.bat, on suprnova the syntax is wrong for the GPU_*** variables, this works perfect in the BATCH file, delete the config file first.
*********************************************************************************
Notice above, the GPU_XXXXXX commands must be preceded by setx or they are ignored!
Good luck!
Its now trading at $100 and dropping, you spent two days for $25, so your making $12/day, do you realize that all the Z-COINS have been paying $12/day for months using the same EQUIHASH algo?? Why waste your time on the BTG BITCH? *** Right now for 2 days my 1060 rigs have been doing me $18/day on zencash, 4 days ago I solo mined BTG then did suprnova, but the pings were 500ms, and the payout was less than $8/day, the difficulty now has dropped from 6M to 3M, which is why your seeing $12, but efficiency is still low cuz the pings make finding work slow. BTG is a waste of time for now, give it another week, if difficulty drops below 1M it could be profitable, price doesn't matter, eventually the WHALES will send this RICO-COIN to the moon. |
|
|
|
ccminer.exe -a bitcore
NO SHIT, that's what the above say's, But it doesn't work, what version are you running? Maybe the new ccminer that has equihash broke the blake / bircore shit??? *** I'm running the newest off of github.com/tpruvot |
|
|
|
do you plan on expanding?
Get a 220V 30 Circuit. If you are going to spend the money on electrician, you should have the ability to expand.
You want 220V because it is waaaay more efficient (lowering operating cost).
Exactly, U just tell the electrician your putting an electric clothers dryer in your bedroom and you need him to drop a new circuit down from the panel, U better hope there is a free breaker slot, or he'll charge u $2k for a new panel *** Better if you just show the SPEC's to the electrician so that he can see you need to 220v/110v ( 1500 watts ) ++ but he may not be aware your power supply has a switch 110 or 220 U want 220 volt, but your plug for dryer is not compatible, so you will need to build your own plug that goes from dryer connection to power supply Best to stay with normal plugs, that way in the future some idiots doesn't plug a hair dryer in your 220v plug, If U tell the electrician to put in a clothers-dryer plug, its better they're always 30am, most water heaters are 20 amps and that not enough current, generally water-heaters are hard-wired and don't have plugs, but 20 amp plugs do exist, but 30amp plugs are common, you can buy female & male, better to build your own power box, that means you can buy one male 30amp and then get a punch of 30am smaller plugs for your power supply, if your order from CHINA, be sure to ask for the normal 220v plug, as most of the world uses 220v Really you should be doing this stuff yourself, if you can't do basic wiring why are you doing basic electronic? *** Again, all the above stuff is common knowledge for a guy into electronics and shit, u really ought to find a friend who knows this shit, an electrician can cost a lot of money, and require a lot permits with city, and make a lot of problems, if its NOT your house, you shouldn't do anything this shit, as if you burn the house down ( highly likely ) YOU will be held liable. |
|
|
|
U should use an open air kitchen rack, found at any restaurant supply store, these home depot storage racks don't allow any vertical ventilation?? R U crazy? Should be wire rack, should have 50cm fans at the end of every rack, and small fans ( 12v 10cm ) in front of every two cards, These days you can buy chinese aluminum grade rigs that support 12 cards for $30, the restarurant racks that support 500LB are about $60, they will support 4 RIGS at 30 cm each tall, about 50 for each rack elevation, the restaurant racks allow adjustable setting every 4 cm Power rack with 220v circult, don't use 110v, all power supplys made in CHINA and come with 220v/110v switch, but the fans ( cmd fans are blowing right left to right on each level ) may be 110 wher you live, and your network switches too may be 110v, this is why its probably better u live in china, russia, or austrailia, only cave-men use 110v If your using windows your a loser, Real men use linux |
|
|
|
The scammy little coin, without real mining software What the fuck is "TimeTravel"? ICO to the Moon, Bounty for All Find 3,000 friends and become a "Life Benefactor" MLM, Scientology, Amway, ... BTX has it all *** What are friends for, if they can't be fucked by BTX? A fool and his CASH are soon separated by BTX investing. All the way to the moon, unless it falls to the ground. |
|
|
|
|
SCAM or RICO people?
Baby 'moron' Scammer's or HUGE ASIC-MINER CHINA/RUSSIAN Mobsters trying to take over BITCOIN??
|
|
|
|
|
if Its UR house, drop a 30AMP 220v line into your computer room, build your own outlet box don't buy one.
Plug your power-supplys in to the box, like I said 30amp at 220v means you can run 8 - 750W power supplys
ALL POWER supplys have a 220v switch, all are made in CHINA, where its 220v
30AM @ 220v = 6,600 Watts plenty of POWER for 8 CM750M power supplys to teach drive 4 1070 class cards, that means 32 GPUS driven off one 30amp line at 220v, with no problems
NEVER pull more than 1500 watts ( 15 amps ) in a single room, your asking for a fire, a lot of places use aluminum wire and you will burn your house down, make sure your 220v @30amp feed is copper, 10Gauge 2+ground is pretty cheap shit, just buy the stuff for electric dryers at home-depot.
|
|
|
|
I have a dedicated 20A circuit that I right now plug a 750W PSU into each outlet. So pretty meager pull. However, I'm going to be adding 4 VEGAs into the mix and so got a 20A PDU strip ( https://www.amazon.com/gp/product/B00077IS32/ref=oh_aui_detailpage_o04_s04?ie=UTF8&psc=1). So I'd like to plug what will now be four 750W PSUs (two diff rigs) into it (I'll be sure to keep it at 16A total either way) and then the PDU into the single outlet. This may be a really obvious question - but ... that's okay right? It felt much better sharing the PSU's between two outlets, but that's probably me just being way over precautious. I'm going to check the internal wiring to make sure it's 12gauge too. *** NO, go to the DRYER CIRCUIT and RUN 220V with the two wires, and wire a bus to all power supplys on the bus, all power supply have a switch for 220 or 110 Running on 220v means 1/2 the current carrying capacity, It's never a good idea to run more than a total of 1500 watts on a household circult and frequently the plates can have neutral & hot swapped, so if you plug into multiple outlets and swap hot&neutral so they short you will have a fire if lucky, and but certainly blow your main panel. Just run a long 220V wire from your dryer to your rig room and run off 220v for all your rig power supplys and run them at 220v 12g is 20am, 10g 30amp, 14 gauge 15 amp, think the normal wire in outlets its 14 gauge 15amp, that be 1500 watts, just one miner, but if you run say 220v on a 10g wire, you can run 30amp, and get 6,000 Watts, maybe 8 rigs each running at 750watts off of one feed, the 220v is normal to be at 30amp, just like a lot of water-heaters *** Sure individual power supplys you can plug into all the outlets, but bare in mind usually in one room its just its all the same circuit, all the same 14gauge wire going back to the 15amp breaker on the 110v line, that means 1500 watts make per room, but a lot of places maybe all the bedrooms are on one breaker, you need to get a signal detector and write the breaker-number for every outlet in the house on the plate, so you know if you have too much load on one breaker Another fuck is often electricians put lights on the same circuit is outlets, then when you turn on/off lights it causes a spike in the power supply resulting in a reboot if you don't have batter back-up isolation. *** FYI In my house I have all the plates for my computers on separate circuit breakers at 220v, in my computer room, I have only 30amp plugs at 220v, same in the kitchen so I can run industrial mixers and convection ovens. |
|
|
|
|
I have seen the continual PUMP of BTX for days here on the 'talk' thread, but this is MINING specific
All paths to BTX 'bitcore' or whatever U want to call it all point to 'ccminer' and say to use --algo timetravel
But in general that doesn't work, then on other mining sites than btx.suprnova.cc, they say to use --algo bitcore, which works sometimes on solo cards but crashes on working rigs
When it is working on solo cards it jumps every few minutes from blake , ...groetzel, to sha, to lbry, to bumfuk, this or that,
There is NO documentation for the also 'timetravel'
There is NO documentation for the BTX brother 'machinecoin' which seems to be the same thing?
***
The websites for BTX is some kind of ICO generator, is MINIING even real? or did they just create the faux notion of minability to make this ICO legitimate?
I asked yesterday about mining BTX and got zero answer, thought I would again today
WhatToMine.com is Reporting $25/day for mining at 200MH/S, not shabby if true, but unusable
It appears the ccminer is the only code that supports this un-documented algo,
I mean come on, no white papers? I thought that was a required check-list for shit-coins?
BTX is trading at $25 and it up 50% from a few days ago, so the coin is being 'whaled' no doubt, very interesting coin, but can it actually be mined?
|
|
|
|
|
Sure U all got your air-drop, those that had the BTC at the time, and took it out of Cold-Storage,
We know that BTG was a scam, it was reported here in August 2017, and on Reddit that the entire team were professional Scammers,
But what started off was just another Chinese ICO to fuck the Chinese people, but then the CHINA GOV banned shity-Alt-ICO's
So Jack Liao shipped BTG off to rich were they had YOBIT.NET sell futures and then the guys in Russia decided to have the BULGARIANS makes a 'fork' of BITCOIN, rather than a pure ICO.
So now we have cross border INTL Mafia running BITCOIN-COIN forks, this would be considered a RICO operation in the normal world.
Anybody call INTERPOL? Ask them why they're sitting on their hands??
The shills are now says that BTG wasn't a "SCAM", that wasn't even in debate a month ago everybody concurred "SCAM"
But now that's real, and its trading, the shills are saying its not a a scam, in spite of 1,000's of people getting ripped;
I know nobdoy in the crypto world cares, but this is an INTERNATIONAL CRIMINAL Organization making BItcoin Forks
Maybe when enough people are hurt the UN will look into these World-SCAM's that are taking place now.
Scam's without Borders, Scams without any responsibility
Scammy websites, theft of BITCOIN's, nobody cares
***
But somebody cares the People hurt from this BULLSHIT care very much, eventually they will put together a world level class action lawsuit and go after the deep-pockets, they always do, if it can be proven to be RICO, then its not hard to broaden the scope of DEEP POCKET's
Make a BILLIONAIRE think twice before he 'forks' another RICO-COIN.
|
|
|
|
To jack liao / Jihan Wu, and Jack Ma I quote Sun Tzu "Know yourself, and know your enemy" The weakness of the chinese billionaires is that they think the BITCOIN community is a bunch of idiots, they may be right, however I hope their wrong.
Why Jack Ma is there?, Well not everyone is idiot lol, I think the mistake of these Greedy Chinese Businessmen is they didn't even consider the other investors which mostly of them are not tech savvy , They just pumped BCH and expecting that they will attract investors from BCH which happened yet not enough to make BCH superior than BTC in terms of price. Some of the investors see Bitcoin as an Investment without even checking the technology behind it. Another Mistake of them is they didn't even build a strong community and didn't created enough Buzz on Mainstream media to backed that BCH Pumping, well, Try harder Greedy Chinese Businessmen. ahh because BITMAIN is behind the KLUSTERFUCK ( aka BCH-BTG ), and ALIBABA ( runs all the BITMAIN c front ends ) Just like this site all RAN by AMAZON, Nothing see, move along, JACK MA is the "Amazon" of CHINA, if its sold, if it has a website or a webstore, Jack Ma's hand is on it, JACK MA knows that ALIBABA will be accepting BITCOIN int the future, so why not control it now? |
|
|
|
|
Remember PPL don't care about PPL here its all a scam the entire ALT UNIVERSE of CRYPTO is a scam, and nobody will care or admit reality until it all vanishes.
But in the meantime ride the wave, enjoy the show.
BIG-BROTHER is slow, they telegraph their moves, if you start to see storys about BTG in the MSM you will know its happening.
If U pay attention to recent, the PRESS has been very silent about this SCAM
They talked endlessly about the 'fork' and launch, ...
The MSM is very much a part of the BTG SCAM
Thus I think very soon, they will start SHILLING BTG as "BITCOIN GOLD"
To the Moon, ...
For instance, in despite of the enormity of this fraud not a mention of Jack Liao and his 100k BTG windfall (8,000 pre-mine blocks), OMERTA the mafia and their MSM lapdogs are silent, until told to bark.
CHINA-ASIC is Ashkenazi Xian, they are NEW WORLD ORDER.
|
|
|
|
|
Show Posts
