So happy I logged on yesterday.  10 hours notbad.jpg Definitely cool, I was glad to get on the list before they were all gone! I will have a few individuals for sale as well once they arrive.  |
|
|
|
Are the 16 extra coins that are not being distributed with the rolls all gray label?
No - thanks for asking that question. 12 gray label and one of each color. This will put the orange more in-line with the Node Bronze breakdown on a percentage basis, although still not quite as rare. I'm not doing anything special with the 16 extra coins other than possibly having them graded. Thanks for the clarification. |
|
|
|
|
Are the 16 extra coins that are not being distributed with the rolls all gray label?
|
|
|
|
|
Is it magnetic (can you stick a magnet to the paperweight) and if it's created from steel, is it made of stainless steel?
|
|
|
|
Any Balisongs? (Butterfly Knife)
I do not have any knives for sale in that style, they are cool though. |
|
|
|
It's both, will be an actual line and can also be a service for those who are interested.
I will try to keep you updated.
I feel that this thread is misleading as you don't have anything for sale yet. The [WTS] label is usually reserved for "Goods", either physical or digital that you have in your possession and "Want to Sell". Instead of posting again I'm sure most would appreciate if you just go ahead and print one of your 3D cubes to show that you can complete the process. From my point of view, it sounds like you are discussing a service and not really selling a product/good yet. This thread may be better off in " Services" (Bitcoin Forum > Economy > Marketplace > Services) or " Service Discussion" (Bitcoin Forum > Economy > Marketplace > Service Discussion) until one is produced and then you can start a new thread with real items for sale. |
|
|
|
BTCump, all items are still available. I'm open to trades for physical crypto goods as well. If you reply on this thread and I PM you, I'd appreciate a reply back otherwise I will assume you are padding your signature campaign.  would you do the Ill Gear Titanium Ti-Virus Punisher Skull Glass Breaker Survival Tool, NIB & the Stilleto for 0.2 Btcs??
what would be the cheapest shipping to UK?
For interested parties, the quote for shipping the above user received was 0.05 BTC (~11 USD) internationally shipped with tracking to the UK.
|
|
|
|
I would expect it to be at least 0.5oz silver if you are going to sell it for 0.25BTC.
I agree, 0.25 BTC isn't cheap. If this item is to be called a "Silver Cube Wallet", I think we will need more information on how the "Wallet" portion is achieved. |
|
|
|
-The amount on the coin is 10,000 bits not 10 bits. If this was only 10 bits, the DIY version and Normal versions would cost the same. (10 bits is 1/5 of 1 cent) Nope! You are wrong! It's only 10.000 (not 10,000) bits engraved. Please read the OP again! And BTW, it doesn't matter much because they are both DIYs, so they are unfunded. I'm positive that you should read this page ( https://en.wikipedia.org/wiki/Decimal_mark) as it will explain that some countries use a period instead of a comma when delimiting. It is 10,000 bits (English delimiter) or 10.000 bits (European delimiter) which are both the same value (0.01 BTC). Typically, English-speaking countries employ commas as the delimiter—10,000—and other European countries employ periods or spaces: 10.000 or 10 000. But I don't know whether they will rust if I use it with my bare hands (for normal usage I, generally won't like to wear cotton gloves everytime I tend to reveal it's private key for spending  ) I need OP's view regarding this. Since these coins are DIY, I would just keep a paper wallet separate from the assembled coin if you want to redeem the funds at any time as you won't have to peel the hologram. You won't even have to touch the coin. |
|
|
|
Only 17 hours left... 1 x Antique Copper and 1 x Antique BronzeThere is only 25 coins of each that has been made. Those are really rare. You can bid on them here: http://www.ebay.com/itm/-/252103633208?Good luck ! Looking forward to the #20 Antique set. |
|
|
|
|
Definitely looking forward to these notes!
|
|
|
|
These little leather style cases work quite well I've found - www.ebay.com/itm/121764923898. Although they are not air-tight, luckily the Kialara is. I have a couple spare cases in Red, Brown, & Black if you're interested. I have something like that for my "show" Kialara. It's not bad, but I really want something air-tight and clear. Definitely, I did see those cases when doing my research but didn't want to take the chance on the metallic bars scratching the housing of the Kialara. I was thinking about machining a circle out of the fake leather to expose the Kialara coin & numbering but I haven't attempted it yet since my idea depended on melding the faux leather and a piece of plastic protector together which would prove difficult to reproduce without more tooling. I have carried the Kialara around in the leather style case and it does a great job protecting the metal and glass and has not received one scratch. The nimbus case looks awesome but I was off-put by the price only. I am interested in the f*D bar cases as well. Has anyone thought about Laminating a Kialara? That is pretty close to what Nimbus is providing except it wouldn't have a frame. |
|
|
|
These little leather style cases work quite well I've found - www.ebay.com/itm/121764923898. Although they are not air-tight, luckily the Kialara is. I have a couple spare cases in Red, Brown, & Black if you're interested. |
|
|
|
Nice, looks pretty cool. Don't think I've ever seen Doritos bullion before.  |
|
|
|
I would like to know the pricing of the coins. |
|
|
|
I've read this book more than once and it has a great viewpoint from bigtimespaghetti on the programs he used to create his designs. If you can already do CAD/Graphics work yourself, you will be glad there is a breakdown of a couple design applications which some may not be currently taking advantage of. |
|
|
|
|
Show Posts
