Latest posts of: sp

Quote from: Amph on July 19, 2017, 07:34:21 PM

so no skunk hash miner sp? i think epsylon is mining it privately or testing if it work...

Not done yet.

Ready to donate 0.05btc?

Quote from: du44 on July 19, 2017, 08:12:26 PM

Tested. If trust to "grey" summary speed is 34mh - thats 5% faster, very well

try to increase the intensity to 23 or more.
-i 23 --gputhreads 4 or more until it crashes. Bether?
You could also try -i 21 -gputhreads 8

Quote from: du44 on July 19, 2017, 07:37:42 PM

Quote from: sp_ on July 19, 2017, 07:25:07 PM

No. The algos are different. Skein can do more than 600MHASH with a proper implementation.
Did you try to run 2 instances of the miner? Does it improve the total hashrate?

Yes i did. I looked for grey printable speed at one second, 17.2 + 17.4 = 34.6 , tested 2 times.. +6% with two threads

I have added a parameter --gputhreads. The code is not done yet (validation errors), but you can test it to see what to expect in release #3

try -i 22 --gputhreads 4

No. The algos are different. Skein can do more than 600MHASH with a proper implementation.

Did you try to run 2 instances of the miner? Does it improve the total hashrate?

Did you try -i 24.1, -i 24.2 ...
I got a user that reported 34Mhash with #2 on the 1080ti.

Quote from: du44 on July 19, 2017, 05:52:42 PM

Tested bitcore with 1070 and 1080ti.
1070 does 20.8 mh, but ti show only 31 mh with good OC. I think ti must show 34-35mh and it can be optimized

What's the highest intensity you can use without a crash on the 1080ti? My build is 32 bit, I should build another 64-bit.

Quote from: pallas on July 19, 2017, 11:59:38 AM

Quote from: sp_ on July 19, 2017, 11:55:33 AM

I can make a miner for this. Anyone willing to give me some btc for the job? I think I will do it tonight.
-Based on the ccminer codebase.
-Faster than the opencl miner
What do you think?

Quite a gamble as tpruvot is probably releasing his ccminer code in hours (he released an sgminer 3 hours ago, and there are ccminers working on his pool).

I already made a miner, but it crashed my pc. Will take a look tomorrow.

Quote from: karname on July 19, 2017, 04:20:12 PM

I checked it with mem 0 or +500, but nothing changed! which number do you prefer?
Also I checked my driver version : 382:33

Did you add 16 gig or more virtual memory? Run without oc first, then increase the clock slowly.

Quote from: karname on July 19, 2017, 03:58:07 PM

I use private spreadcoin miner for 1080 and 1080ti with -x 28
after some minutes miner got problem.

I lowered clock and increased power limit but nothing changed and after some minutes I got problem
My parameters for cards are :
Zotak 1080 amp extreme
Power limit : 90
core : +85
Mem : -500
----
MSI 1080TI gaming x
Power limit : 90
core : +130
Mem : -500

Also I think my hashrate is lower than you said (when miner work normally at first):
1080TI : 15.3 Mhash/s
1080 : 10.1 Mhash/s
Also after some hours my balance in wallet is 0.00 SPR
How can I fix it?

I will fix exit up on crash in the next release.

Some cards doesn't like the mem -500.

Also make sure you have the 382.xx driver installed and not the 384.xx.

The coin was launched yesterday. The early miners get alot of coins. You mine and hold. Might be worth something in the future. Alot ofncoins started out like this. If you f.ex mined Dash the day after launch and kept your coins until today you would have been rich.

Any progress on this?

I can make a miner for this. Anyone willing to give me some btc for the job? I think I will do it tonight.

-Based on the ccminer codebase.
-Faster than the opencl miner

What do you think?

Code:

int64_t nSubsidy = 1 * COIN;

    if(pindexBest->nHeight <= 30000) {
        nSubsidy = 2500 * COIN;
    } else if(pindexBest->nHeight <= 60000) {
        nSubsidy = 1250 * COIN;
    } else if(pindexBest->nHeight <= 100000) {
        nSubsidy = 625 * COIN;
    } else {
        nSubsidy = 1 * COIN;
    }

Agressive reward on the first 100 000 blocks. Grin

"New Skunkhash Raptor Algo"

Nice name

Verge. (Blake2s) take a look at zpool.ca for more coins

Blake2s sp-mod #1 beta

28-29MHASH (6xgtx 1070)
1070 80% tdp. -500 mem, +150 core. 6x gigabyte g1 gaming
4700 MHASH per card

What do you get with the alexis miner?

I have made a speedup in the profitable bake2s algo. Around +15% faster than alexis 1.0 (gtx 1070)

I was thinking 0.05 btc for the subscription.

Quote from: bitinpy on July 18, 2017, 03:21:01 PM

Which intensivity better for 1080ti, 30 or 75 no different in Mh/s

try 60. And use 100% tdp.

Quote from: pallas on July 18, 2017, 02:26:48 PM

how does the intensity works?
usually it's (2^intensity) threads, which of course can't be, because with 62 you have 4294967296 giga threads, they just don't fit into any gpu ram, now nor in the future at least till the end of humanity :-D

It's -X intenstity where the throughput is a mulitplication (number) * X