Do you own this thread below - https://bitcointalk.org/index.php?topic=5396092.0;topicseenIt seems you have two accounts you posted it there first with your alt account with negative trust then posted here and what I see here is farming merit? It won't be a coincidence? And you are trying to promote a scam website according to some negative feedback you are trying to promote a recovery service which is a scam.
|
|
|
Why not post the whole kernel logs here for a little bit of insight? It might be a compatibility issue because the new fan that you replace will be forced to run around 7000rpm. If it's not compatible you smell like burn better replace them only with a compatible fan check this fan below from ZeusBTC - https://www.zeusbtc.com/UsedMinerDetails.asp?ID=46
|
|
|
Not a good idea to clean them while running why not stop mining for 10 to 20 minutes it's not a big deal cleaning the for a few minutes. And yes you can use an air compressor but be careful it can blow some components if you can control the air pressure just set it to mild airflow not too much.
|
|
|
Hi, I have a A1246 87TH and trying to use this command for the static fan setting and it just sits on the "running command" progress bar. I also tried the Aging tab and prior, the machine ran at 75TH on normal mode, and 88TH. Now it is showing 88TH in normal mode. Thoughts?
Did you include the bold tag? Remove it just like this below [{"command":"ascset","parameter":"0,fan-spd,90"}] About 88th in normal mode how did you know if it's running at normal mode? Usually, you can check it on API logs under WORKMODE if it's 0(normal) or 1(performance). And if you choose a normal mode on the pool configuration it doesn't mean it will run in normal mode it will still automatically run at performance mode if your temp is running at a cooler temp.
|
|
|
I've tried to contact him on twitter but no reply... Looks that there is no chance to recover these funds. Luckily I don't have much stuck there.
I don't think you can able to contact them they have an old issue before about security breaches that end up closing their service. About what you said above your post this one https://instawallet.org/w/some_long_codeThat is the security breach and most of the wallets are recorded on archive.org sample this one https://instawallet.org/w/h5qmpGNTseZ513uiFT9zqFuAvx277m3zg
That's an old wallet so it's impossible that you can still recover your wallet by giving this URL with your own code because anyone can have the same URL by going to archive.org and use that URL to send it to the owner of instawallet.
|
|
|
Hello,
I am planning to buy a Aisen A1 Pro. Are these reliable machines? I know some miners have trouble operating under high heat such as the avalonminer and some are better at higher heats such as whatsminer. How would you rate these Aisen miners?
Overall, would you recommend these miners?
FYI, I basically have access to almost free electricity.
Best, Obi
Not a good option if you are going to buy this unit there is no support here or support website for this unit. I suggest you better ASIC miners that have support like Antminer. If you want to look for a list of manufacturers then I suggest you read this thread - https://bitcointalk.org/index.php?topic=5045732.0
|
|
|
How about the control board do you have an extra control board? Try to replace the control board if it still keeps rebooting. If you don't have an extra control board or after restart it works then try to flash the control board through an SD card you can follow the guide from here S9 series (S9, S9i, S9j, S9 Hydro) Control Board Program RecoveryThen update here if the issue solve or not.
|
|
|
Based on your previous logs I think it's because of chip temp few of the 3rd hashboard have a chip temp near 85c and maybe there are temp spikes that cause hardware errors.
Why not check that 3rd hashboard? I don't know if you use thermal paste or pads but try to replace them and check the temps again under PVT_T0, PVT_T1 and PVT_T2. Or like I said before force your miner to run at normal mode instead of performance mode to test if it's running without hardware errors.
Also, this MH[8 10 9] HW[27] DH[2.841%] it is above the normal value and it's pointing to each hashboard.
|
|
|
There are lots of affiliate networks that offer Crypto right now why not search it for yourself using this tool below. - https://www.offervault.com/Just categorize them into Crypto and you should find all Crypto-related offers that you can promote and earn from leads or CPA. As of now based on what I searched only algo-affiliates.com has many Crypto offers if you are looking for reviews check this https://www.affpaying.com/algoaffiliates
|
|
|
It seems that they are no longer give you the recovery QR code based on what they said on their contact page REQUESTS TO BE SENT A NEW AUTHENTICATOR CODE WILL BE SUMMARILY IGNORED. DO NOT ASK. Have you tried to search on your PC and maybe you save the seed phrase in the notepad with the name Electrum or Seed try it first and maybe your seed phrase is saved somewhere on your PC. Then you can recover your 2fa through this https://trustedcoin.com/static/recover/standalone.html it will generate a new wallet file and you can import it to Electrum without 2FA.
|
|
|
Linux-type OS must be considered safe but it always depends on the people on how they protect their PC. If you open a server on Linux mint it's open port enabled so your IP can be scanned by some hackers who always scan for IPs with open ports and later on do some attacks like DDOS attacks or do a brute force until they can fully control your PC.
So there is no best OS or safer it depends on you how you protect your wallet. If you want a safer wallet then go to hardware wallets use any OS of your choice just make sure that you know how to protect your PC like on Windows you need to protect your PC from any virus and malware attacks by installing Antivirus or Linux mint or any Linux type always disable open ports and you don't have much knowledge about Linux I suggest switch back to Windows because without knowledge how can you protect your wallet from any attacks online?
|
|
|
Be careful there is 3 javascript from the website I'm trying to understand the script but it seems it's also collecting data be careful to those who are using home internet IP. And one of the scripts was made by one of the well-known developers on Github "Feross Aboukhadijeh".
The copy button might also have a hidden trick to copy all of our clipboard history so better if you are going to access the website for testing always use a dummy PC.
The owner of this website doesn't seem to know how to be listed on search engines or SERP or does not have knowledge about SEO.
What I see for most of the newbies nowadays is trying to promote unknown websites here on the forum to collect data.
|
|
|
This unit doesn't have a website or support if you have contact where you buy this unit maybe he can able to help you try to ask the seller if he has a firmware of this unit.
But I think your issue is related to PSU, not the firmware but it's worth trying before you decided to go into a hardware issue. If flashing didn't work try to disassemble the unit and remove all dust and clean them with compressed air(Not too much air pressure just make sure it's enough to remove dust). Then check the terminal for rust and corrosion then clean them with lacquer flo thinner or any cleaner that can remove rust. Then test it again.
|
|
|
Based on what I searched you can able to import BRD seed backup to Electrum with a different derivation path and you must enable BIP39 when importing BRD seed into Electrum. The derivation path must be m/0′But if your BRD wallet is segwit you can follow this guide below. The link is already posted above. - https://bitcointalk.org/index.php?topic=5204223.0
|
|
|
Trading is not the same as selling products that can make you profit easily without knowledge you will end up losing your money. You should learn and experience how exactly trading works and it's up to you how you can make a profit by trading. If you want to make a profit in trading you must study and learn some techniques and learn how to read charts. You don't need to risk money as a beginner you can trade with trading simulators that don't need to deposit. I suggest you read the two techniques that will help you to make a profit under this link below. - https://github.com/SpiralDevelopment/Awesome-Crypto-TradingScroll down and look for fundamental and technical analysis. And the link above has lots of free tools including a trading simulator and aggregators. Use the skill that you learn from TA and FA with the trading simulator to avoid losing money. Then apply the effective strategy to real exchange.
|
|
|
Im a bit concerned and was thinking about finding another repair center maybe in Europe but I don't know if it exists. If you have any clues do not hesitate. Cheers Mate!
Why not try to contact zeusbtc and maybe they can be able to help you or check this link below and look for a repair center near you. - https://www.zeusbtc.com/ASIC-Miner-Repair/Scroll down to the bottom to find the list of the repair center.
|
|
|
I think the default key pool size for HD wallet is increased to 1000 which is the default unless if your wallet was generated from an old wallet(Bitcoin QT) by default it's a 100 key pool size. You can change the key pool size anytime if you want to generate more than 1000 you can add this in your Bitcoin.conf file 10k is just an example you can change it if you want lesser than 1k or more than that.
|
|
|
Can you try to change your Daemon URL into localhost instead and edit the services replace them with the configuration below? DB_DIRECTORY = <path>/electrumx/db DAEMON_URL = rpcusername:rpcpassword@localhost SERVICES = tcp://0.0.0.0:50001 COIN = Bitcoin PEER_DISCOVERY = off Source: https://www.youtube.com/watch?v=QiX0rR_o_fIAlso, try to change Peer_discovery on or off and check if your server will show up automatically in "electrumx_rpc peers". Check this Reddit post below to get some idea about configuration. - https://www.reddit.com/r/Electrum/comments/ggmduo/electrumx_over_tor_configuration_help/I search more and it seems it's not easy to set up ElectrumX through TOR I have never seen someone succeed or share a guide on how they succeed in configuring their ElectrumX with TOR.
|
|
|
The image shows that it has lots of dust and since humidity makes dust adhere to one another it could lead to a short circuit. You should have monthly maintenance for these units and I think filtering your air intake will help reduce dust and humidity. And MP3426 is replaceable you can buy this chip on ZeusBTC from here https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1182
|
|
|
If it is still showing a problem on the middle hashboard it's a hardware issue under your control board because you already swap the cables and hashboard it means that the middle hashboard is working since you said before that you buy a replacement control board and maybe you receive a defective one. If you don't have technical knowledge if I were you I better hire a technician that knows about ASICs repair. Try to ask ZeusBTC from this link below and also try to check the list of repair centers under that link maybe there is some repair center near your area. - https://www.zeusbtc.com/ASIC-Miner-Repair/
|
|
|
|