Miners update
- lolminer-v1.52a (Fixed bug that can sometimes cause the pool hash-rate to half after multiple reconnect attempts in a row. Adjusted behavior of LHR unlock function so solve issues with some configurations occurred in 1.52)
- nanominer-v3.6.7 (Fixed bug: nanominer does not require libcuda.so on AMD rigs anymore)
- wildrig-multi-v0.31.5-beta (Implemented curvehash (NVIDIA and AMD. Not supported old drivers for AMD Navi gpu's). Fixed gfx1034 support(Radeon 6500XT). Slight speedup of curvehash for Polaris/Vega gpu's)

Miners update
- nanominer-v3.6.6 (Fixed 90% LHR unlock for Nvidia 3080 12 Gb. Fixed high CPU usage with disabled hardware-accelerated GPU scheduling for ProgPow algorithms family (KawPow, FiroPow) on Nvidia GPUs. Hashrate is now displayed once per 30 seconds for all algorithms)
- teamblackminer-v1.65 (Added option to locate verthashdata file --verthash-data (-7). Improved the speed (default xintensity) for AMD in Verthash. Fixed the API hashrate for verthash)

Miners update
- lolminer-v1.52 (New memory management for Ergo on Nvidia GPUs. Fixes the miner not working on current epoch on latest release and fixes the requirement to restart the miner on Ergo epoch change. Added 2 more epochs on Ergo for 3G AMD GPUs. Slight changes to LHR unlocker to improve the unlocker stability. Removed: 2G zombie modes for Ergo on AMD. Removed: Support for mining Ton in single and dual mining modes.  ote that existing dual mining configurations will automatically launch Eth / Etc / Ubiq only mode, so existing configurations will not be broken. Fixed multiple issues that caused the miner not to properly reconnect when it took too many attempts. Added an internal stratum watchdog, that will restart the entire stratum stack internally, when not connected for a longer while.Fixed a potential segmentation fault at startup. Fixed a segmentation fault when Alephium dual mining is requested, but the dual worker did not get authorized)
- teamblackminer-v1.64 (Added support for Vertcoin mining (Verthash algo) on AMD and NVIDIA GPUs. Fix issues in Zil mining)
- teamredminer-v0.10.2 (Tweaked Polaris ethash tuning to work better with the new smooth-power setup. Fix for Autolykos crashing on Polaris and 4GB GPUs. Fix for Eth+Ton dual mining crashes with new smooth-power setup)
- xmrig-v6.18.0 (Removed deprecated AstroBWTv1 and v2. Monero v15 network upgrade support. Fixed ZMQ debug log. Improved daemon ZMQ mining stability. Removed old AstroBWT algorithm)

Miners update
- gminer-v3.01 (Fixed RavenCoin mining errors. Fixed displaying of pool hashrate for RavenCoin)

Miners update
- nanominer-v3.6.5 (90% LHR unlock for Nvidia RTX 3050 & 3080-12gb. Recommended drivers: 510.x and required Admin/root privileges enabled. 90% LHR unlock does not work 515.x at this moment)
- srbminer-multi-v0.9.7 (Performance increase and lower power consumption on 'kaspa' and 'heavyhash' algorithm for RDNA2 GPU's. Added limited support for some algorithm's on Vega's (gfx900) for drivers newer than 20.40. OpenCL variables will be now set automatically from miner)
- teamredminer-v0.10.1 (Reworked smooth power for improved stability, primarily on Polaris and Vega gpus. Added --eth_smooth_power to control the smooth power scheduling feature. Fixed bug causing Autolykos hashrate drop on VIIs)

Miners update
- bzminer-v9.2.1 (Optimized dual mining for eth/etc + kaspa and eth/etc + alph (Nvidia only, experimental). Fixed LHR issue when mining non-LHR algos (kaspa/alph). Added oc_reset_all command line argument. Added reboot_after_watchdog_restarts option
  advanced_config is now enabled by default. Can mine Zil with any algo. Zil dag creation only happens once. Always mine the Zil windows when alternate/split mining. Ixi looks at total memory instead of available memory when determining intensity. Fixed throttle notification power limit always yellow. Fixed autofan parsing as 0 for intenger only values. Fixed Alephium issue when multiple solutions are found at once. Added extra_dev_fee to command line)

Miners update
- nanominer-v3.6.4 (Improved LHR unlock stability on old drivers. Recommended drivers are still 510.x and Admin/root privileges are required to unlock. 100% LHR unlock does not work on newer drivers than 510.x at this moment)

---

Miners update
- miniz-v1.8z3 (Added support for AMD GPUs 6600/6800/6900 (XT). Added support for AMD 590. Reduced stale shares on Aion. Improved stability. Minor bug fixes)

Miners update
- srbminer-multi-v0.9.6 (Added algorithm 'kaspa' (KAS - Kaspa coin), fee 1.00%. Small performance increase on 'heavyhash' algorithm for RDNA2 GPU's. Lower power consumption on 'heavyhash' algorithm for RDNA2 GPU's. Minor bug fixes)

Miners update
- gminer-v2.99 (changed display of job/share difficulty to match mining pools (specially for solo mining))

Miners update
- gminer-v2.98 (Optimized RavenCoin mining. Decreased miner size (-30 MB). Removed BeamHash algorithm)

Miners update
- nbminer-nebutech-v42.2 (Ethash Add a new option --lhr-mode to select LHR unlock mode. --lhr-mode 1 is the default mode and is the same as which in v41.5. Try to use --lhr-mode 2 if stability issue encountered in mode 1. LHR v3 GPUs can only use mode 1. Ethash extend LHR unlocker to work with old driver versions. Starting from driver  v515.x, LHR unlocker no longer works, make sure not to use these new driver versions. Ethash small hashrate improvement on Nvidia GPUs. Add GDDR6X memory temp in summary table. Add Nvidia driver versoin in summary table. Ethash add eth_submitHashrate for nicehash (EthereumStratum) protocol. If Overclock applies through nbminer, reset settings to stock when miner exit)

Miners update
- t-rex-v0.26.4 (LHR unlock of 3080 12GB and 3050 (~90%). Fixed issue with miner sometimes takes too long to shut down on multi-GPU rigs)

---

Miners update
- nbminer-nebutech-v42.0 (Ethash Extend LHR unlocker work with old driver versions. All previous drivers should work until 515.x. Ethash Improve LHR unlocker stability. Ethash small hashrate improvement on Nvidia. Add GDDR6X memory temp in summary table. Add GPU RAM type and GPU RAM vendor in log. Add Nvidia driver versoin in summary table. If Overclock applies through nbminer, reset settings to stock when miner exit. NBMiner versions older than v39.5 will run into issue when ETH reaches EPOCH 520 (Approx mid September). Please make sure to upgrade to a newer version before that if ETH is still with POW)
- srbminer-multi-v0.9.5 (Added algorithm yescryptr8, yescryptr16, yescryptr32, frkhash. Lowered devfee for autolykos2, blake3_alephium. Small performance increase on autolykos2 for RDNA2. Small performance increase on dynamo for GPU's. A little bit faster dataset creation on autolykos2 for some GPU's. A little bit lower power consumption on autolykos2 for Ellesmere GPU's. A little bit lower power consumption on ethash/etchash for RDNA2. Added parameter aliases for --algorithm, --cpu-threads, --password, --pool, --wallet ( -a, -t, -p, -o, -u ). Parameter --diff-factor now accepts values in decimal format too. Removed support for older GPU's (pitcairn, tahiti, hawaii, fiji, tonga). Minor bug fixes)

---

Miners update
- nbminer-nebutech-v42.1 (Fix ethash LHR unlocker can not unlock on certain GPUs)

Miners update
- lolminer-v1.51a (Improved / Fixed Nvidia memory management. Other improvements)
- nanominer-v3.6.3 (100% LHR unlock for Nvidia LHR v1 and LHR v2 GPUs. Recommended drivers: 510.x and Admin/root privileges are required to unlock)

Miners update
- gminer-v2.96 (LHR unlock for oldest drivers (fixed "LHR unlock failed" error on old drivers))
- teamredminer-v0.10.0 (R-mode introduced for Vegas/VIIs/Navi10/Big Navi. Smooth power transitions for ethash family algos. Added support for multiple --api_listen and --api_listen2 endpoints (up to 8 total). Added argument --gpu_sdma=on|off for special situations. For example, BC-250 needs --gpu_sdma=off)

---

Miners update
- lolminer-v1.51 (Extended working range of 100% LHR unlocker to 470 and 472 drivers. On 515.x drivers unlock currently does not work. New parameter for dualmining: --dualfactor. Fixed bug causing the Zombie mode on 5G Pascal GPUs (1060 5G, P2000) not to work. Minor LHR unlocker stability improvements)

---

Miners update
- bzminer-v9.1.4 (Fixed 100% LHR Unlock v1 not working on older drivers <511.x. Core, memory, and power limit throttle notifications. Added --cache_dag for eth + zil mining. Fixed ezil protocol. Added --update_frequency_shares x to update display only after x shares found. Fixed autofan temperature range not working correctly. Fixed Ixian not reconnecting to pool properly. Fixed timings name column not expanding properly. Added ethzil scripts)

Advanced Command update
- Reflash Command improved download speed in some cases and with second repository support
- Download and Host command improved also with faster download and second repository support

Miners update
- gminer-v2.95 (90% LHR unlock for LHRv3 GPUs (3050 and 3080 12GB). Removed Tor and Aeternity algo. Decreased miner binary size (-15-20 MB))

Miners update
- bzminer-v9.1.3 (Much more stable 100% LHR Unlock v1! (supported on drivers 465-511). LHR Unlock stability adjuster --lhr_stability. Lower value is more stable. Added Auto fan control --oc_fan_speed. New rejected shares watchdog. Added command line option --hide_disabled_devices)
- gminer-v2.94 (fixed performance degradation on FHR cards (appeared in 2.92). Improved performance for LHRv3 GPUs (RTX 3050 and RTX 3080 12GB))
- lolminer-v1.50 (100% LHR unlock on LHR V1 and V2 GPUs for all algos. Requires Nvidia driver 510.x and sudo/administrator privileges! Added experimental LHR v3 unlock to ~90% (3050) and ~92% (3080 12G) (default enables) Use --lhrv3boost 0 to disable the mode and fall back to ~65% unlock. Fixed a bug in 1.49 causing Ergo mining not to start on Nvidia)
- nbminer-nebutech-v41.5 (Ethash add 90% LHR unlocker for 3080 12G & 3050. Ergo add LHR unlocker support. Ethash LHR unlocker improve stability)

Miners update
- t-rex-v0.26.1 (Eethash, Autolykos2 - LHR 100% unlock (except 3080 12GB and 3050). LHR unlocker requires 510.xx NVIDIA drivers)

---

Miners update
- gminer-v2.92 (LHR 100% Unlock. Unlocker requirements: driver 510.xx, root privileges)
- lolminer-v1.50-beta (100% LHR unlock for all LHR affected algorithms on LHR v1 and v2 GPUs. Required drivers: 510.60.02 or 510.68. On other drivers the previous 79% unlock on Ethash will be active. Miner needs admin / root privileges to unlock the cards. The miner will unlock the cards approximately 30 seconds after start. Please make sure all OC operations are completed before. On dual mining the LHR cards will now behave live full hash rate cards. This means dual mining tuning will start approximately 1 Minute after the DAG build is completed)

Miners update
- bzminer-v9.1.0 (100% LHR Unlock v1! (Unstable, experimental, lower oc's). LHR Unlock stability adjuster --lhr_stability. GDDR5 --oc_mem_tweak. Added pause to end of batch files. Fixed Nvidia oc's sometimes not engaging)

Miners update
- miniz-v1.8z2
- nbminer-nebutech-v41.3 (Ethash Improve stability of LHR unlocker. Ethash fix crash on AMD GPUs. Ethash Improve compatibility on rigs with small system memory)