Some high lvl cards should turn into blockchain  I am happy to announce that I just managed to finish all the levels in beta :d Impressive! Any Thoughts on the completion, feedbacks? I am afraid interface is still not clear for me. Colours are too similar to distinguish cards rarity |
|
|
|
I joined for twitter bounty and newsletter
I need to register an account to claim it after ico is end?
That's a good question, so if we joined for twitter and newsletter bounty in the last few days, we need to send an e-mail to contact@antshares.org or not? Some official statement? thanks. Get an ANS address. (click "Let's do it" on antshares.org and follow the insturctions) Then, email us your info. ^ ^ Could you answer to confirm if you get our emails? Tkanks! |
|
|
|
Some high lvl cards should turn into blockchain I am happy to announce that I just managed to finish all the levels in beta :d |
|
|
|
70k resistance level broken  and I have no money for buying.. I hope it will be some good info in newsletter soon... |
|
|
|
Ethman issue: Few ours after starting all rigs went red (indeed rigs work, but EthMan doesn't show it) and I have : Access violation at adress 00000000. Read of adress 00000000 error when I try to close the Ethman... |
|
|
|
physical card is great idea  After official game release our cards will be erased ? |
|
|
|
I send email for twitter bounty at : contact@antshares.orgWith my name @etc. and my address antshares . I send 3 past day , but i dont receiving answer . Plz PM me your email address I sent it too, and I sent you PM But didn't receive the answer no on mail nor pm here.. |
|
|
|
Any idea what parameters to use one gpu from 2 available, I tried --device 0 but it does not work.
--opencl-device |
|
|
|
I am having a problem with one of my rigs it is crashing all the time (sometimes I have to disconnect the power to all GPUs, uninstall the onboard graphics, and then connect the power to all cards again before rebooting the PC to get the PC to boot, and sometimes I even get THREAD_STUCK_IN_DEVICE_DRIVER error message when trying to boot the PC), and I did find out that if I turn off GPU 5 it seems to work better and not crashing.
I am running in Windows 10 x64 with Sappire Radeon RX 480, and I did try different drivers without any luck. And I got the same clock settings on all cards (I am running 4 more RX480 on another machine and that one did not crash one single time in over 3 weeks) This is how the logfile looks right before the crash if I run with GPU 5 on...
02:27:22:161 11f0 ETH: GPU0 27.335 Mh/s, GPU1 27.361 Mh/s, GPU2 27.348 Mh/s, GPU3 27.288 Mh/s, GPU4 27.351 Mh/s, GPU5 0.000 Mh/s
02:27:22:166 11f0 DCR - Total Speed: 2733.663 Mh/s, Total Shares: 319, Rejected: 4
02:27:22:171 11f0 DCR: GPU0 546.709 Mh/s, GPU1 547.214 Mh/s, GPU2 546.966 Mh/s, GPU3 545.762 Mh/s, GPU4 547.012 Mh/s, GPU5 0.000 Mh/s
02:27:22:446 ca0 DCR: weak share, skip
02:27:23:291 6ac DCR: weak share, skip
02:27:23:761 408 GPU0 t=59C fan=44%, GPU1 t=84C fan=61%, GPU2 t=79C fan=53%, GPU3 t=79C fan=58%, GPU4 t=85C fan=61%, GPU5 t=85C fan=60%
02:27:23:766 408 em hbt: 0, dm hbt: 0, fm hbt: 0,
02:27:23:766 408 watchdog - thread 0, hb time 203
02:27:23:771 408 watchdog - thread 1, hb time 94
02:27:23:771 408 watchdog - thread 2, hb time 0
02:27:23:771 408 watchdog - thread 3, hb time 125
02:27:23:776 408 watchdog - thread 4, hb time 31
02:27:23:776 408 watchdog - thread 5, hb time 141
02:27:23:781 408 watchdog - thread 6, hb time 219
02:27:23:781 408 watchdog - thread 7, hb time 110
02:27:23:786 408 watchdog - thread 8, hb time 94
02:27:23:786 408 watchdog - thread 9, hb time 203
02:27:23:791 408 watchdog - thread 10, hb time 77656
02:27:23:791 408 WATCHDOG: GPU 5 hangs in OpenCL call, exit
02:27:23:796 408 watchdog - thread 11, hb time 77547
02:27:23:801 408 WATCHDOG: GPU 5 hangs in OpenCL call, exit
02:27:24:806 408 Restarting OK, exit...
This is how my *.bat file looks
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xMyEtherWalletAddress -epsw x -eworker miner2 -dpool stratum+tcp://dcr.coinmine.pl:2222 -dwal MyUsername.miner2 -dpsw MyPassword -dcri 40
What can be wrong, any advice?
Try not to push your GPU5 too hard... you must be running at 2250mhz solutions for you: 1. Find out which one is GPU5 2. back to stock setting and slowly work your way up (2100 or 2125 mem is a good start.. ) 2. Try ramp up the Fan speed (I saw your temp very high 85C) 3. Continue monitoring Set temperature limit not more than 80: I recommend you -tt 75 and -ttdcr about 78 to check if prevention of your cards overheating resolve your problem. If it will be ok you can try little higher parameters, if not try another adjustement -li -ethi etc (look OP for further details) Guys, I'm almost done buying the following stuff:
Graphics Cards: 3x XFX Radeon RX 480 GTR OC 8GB - RX-480P8DFA6
Motherboard: GIGABYTE - Socket 775 - GA-EP35-DS3P
Riser: PCIe x1 to x16 Powered Extender (Over 1m USB 3.0 Cable) (USB 3.0 A with Molex)
PSU: Corsair CX750M 750W Watt Bronze Power Supply
Two out of three graphics will directly be connected with the motherboard (as there are 2 x16 PCI-e slots) and one will use the extender through x1 slot on the motherboard. Windows 10 x64 will be used as an OS.
Do you guys think that I'll be able to secure 85 Mh/s with this specification of the system using Claymore GPU miner? Someone here got any past experience with any of this stuff?
You can get ~24.8 per card, perhaps up to 27 if you OC the memory a lot. So more like 75 stock. Are you saying that on some base? Have you tried off any of those? I'm pretty much looking forward for some suggestions/reviews. By the way, does Claymore mining work good with Windows 10 x64? Yes, but prevent to click on miner output, because it freeze the mining (at least in my case - focus) and I don't know how to disable this xS |
|
|
|
slack invitation still broken? |
|
|
|
|
Sorry Claymore, You were right about Windows 10 focus miner stopping..
Could you tell me how to disable this feauture to prevent further mining breaks?
|
|
|
|
|
Why price is so low?
I was full of hope with this project. Lately I did not have much time to read the news, could someone explain me what had happened?
|
|
|
|
Would like to join you on slack but cannot: Failed! invite_limit_reached I am very disappointed BTW How could I check current antshares price? I remeber something about triple click somewhere on the site but I forget where xD |
|
|
|
No, it's not the case.. Miner stop working - I can see it in pool worker stats.. And it happened once again a while ago No I turned off dual mining.. but what could be a reason that miner doesn't restart itself? It happened again eth only mode.. After I press a key it said: 08:53:04:172 1638 ETH: Stratum - socket send failed 10053, disconnect And last share I had from c. a. 23.30 |
|
|
|
No, it's not the case.. Miner stop working - I can see it in pool worker stats.. And it happened once again a while ago Now I turned off dual mining.. but what could be a reason that miner doesn't restart itself? |
|
|
|
Claymore, It seems to sometimes miner doesn't restart itself, but only when I press a key (I press 's' from time to time to see if everything is ok) Here's the log: BEware over 8mb lenght.. https://www.pastefs.com/pid/4083 showed only when I press the key... |
|
|
|
Mostly temp control works fine, but today I had a problem so I had to restart miner.. My config is: -dbg 1
-tt 74,74,74
-ttdcr 77
-fanmax 95 When I start miner I got almost immediately 83C and my fans go to 95% which was strange because almost always it takes some time to cards warm up.. I wonder if it could was miner fault or rather (most probably) mine (rigs)... And once again thanks a lot for your work Claymore! |
|
|
|
Using Ver 5.1, dual mining ETH + DCR I am getting annoying behavior on one of my rigs. Would like to know what these lines mean:
04:57:27:598 f10 OC v5, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst
04:57:28:927 abc recv: 51
04:57:28:927 abc srv pck: 50
04:57:28:942 abc OC v5, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst
04:57:28:958 abc srv bs: 0
04:59:56:442 f10 WATCHDOG: GPU 0 hangs in OpenCL call, exit
04:59:56:442 f10 watchdog - thread 2, hb time 219
04:59:56:442 f10 watchdog - thread 3, hb time 47
04:59:56:442 f10 watchdog - thread 4, hb time 250
04:59:56:442 f10 watchdog - thread 5, hb time 63
04:59:56:458 f10 watchdog - thread 6, hb time 79
04:59:56:458 f10 watchdog - thread 7, hb time 250
04:59:57:473 f10 Restarting OK, exit...
Of 7 rigs, this one is constantly restarting the miner every 4 to 5 min.
This is not a power issue or faulty riser, I'd like to understand more the log file.
Claymore? Can you help?
GPU are not overclocked, running at stock speed.
All my rigs are on Win 10 Pro, 15.2 AMD drivers, This rig is AMD FX6200 16gb Ram
Cheers,
Franco
Try to look for " [GPU #0] got incorrect share. If you see this warning often, make sure you did not overclock it too much! (Let's press ctrl+f in notepad and just paste "incorrect") I have similiar problems as you(my rigs works few hours not minutes...) : 21:36:11:765 1178 args: -dbg 1 -tt 74,74,74 -ttdcr 79 -fanmax 95 -dcoin sia
21:36:11:, 765 1178
21:36:11:765 1178 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様融
21:36:11:765 1178 ş Claymore's Dual ETH + DCR/SC GPU Miner v6.2 Beta ş
21:36:11:765 1178 Č様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様Ľ
21:36:11:765 1178
21:36:11:984 1178 ETH: 2 pools are specified
21:36:11:984 1178 Main Ethereum pool is eth.coinmine.pl:4000
21:36:11:984 1178 SC: 4 pools are specified
21:36:11:984 1178 Main Siacoin pool is sia-eu1.nanopool.org:7777
21:36:12:624 1178 OpenCL platform: AMD Accelerated Parallel Processing
21:36:12:624 1178 OpenCL initializing...
21:36:12:624 1178 AMD Cards available: 3
21:36:12:624 1178 GPU #0: Pitcairn, 2048 MB available, 16 compute units
21:36:12:624 1178 GPU #1: Tahiti, 3072 MB available, 32 compute units
21:36:12:624 1178 GPU #1 recognized as Radeon 280X/380X
21:36:12:624 1178 GPU #2: Pitcairn, 2048 MB available, 16 compute units
21:36:12:624 1178 POOL/SOLO version
21:36:12:624 1178 b210
21:36:12:640 1178 start building OpenCL program...
21:36:22:156 1178 done
21:36:22:156 1178 GPU #0: set -etha as 1 (ETH algo for slow cards)
21:36:22:156 1178 GPU #1: set -etha as 0 (ETH algo for fast cards)
21:36:22:156 1178 GPU #2: set -etha as 1 (ETH algo for slow cards)
21:36:22:156 1178 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
21:36:22:156 1178 No NVIDIA CUDA GPUs detected.
21:36:22:156 1178 Total cards: 3
21:36:22:265 e8c ETH: Stratum - connecting to 'eth.coinmine.pl' <139.162.173.166> port 4000
21:36:22:327 1178 DUAL MINING MODE ENABLED: ETHEREUM+SIACOIN
21:36:22:327 1178 ETH: miner-proxy stratum mode
21:36:22:327 1178 Watchdog enabled
21:36:22:327 1178 Remote management is enabled on port 3333
21:36:22:327 1178
21:36:22:359 e8c send: {"id": 1, "method": "mining.subscribe", "params": []}
21:36:22:359 e8c send: {"id": 2, "method": "mining.authorize", "params": ["5adamvp.1","x"]}
21:36:22:359 e8c ETH: Stratum - Connected (eth.coinmine.pl:4000)
21:36:22:390 e80 SC: Stratum - connecting to 'sia-eu1.nanopool.org' <185.71.66.31> port 7777
21:36:22:468 e8c got 100 bytes
21:36:22:468 e8c buf: {"error":null,"id":1,"result":[["mining.notify","deadbeefcafebabe9a28040000000000"],"7fff9d76",10]}
21:36:22:468 e8c parse packet: 99
21:36:22:468 e8c new buf size: 0
21:36:22:468 e80 send: {"id": 1, "method": "mining.subscribe", "params": []}
21:36:22:468 e80 send: {"id": 2, "method": "mining.authorize", "params": ["3bfc04fdd58075e87f2995806067885b5e95ebda8c5cacdf795cabd890b52ab7f18cb5f9aa83/eu1sia/adam21@o2.pl","x"]}
21:36:22:468 e80 SC: Stratum - Connected (sia-eu1.nanopool.org:7777)
21:36:22:609 e8c got 378 bytes
21:36:22:609 e8c buf: {"id":null,"method":"mining.set_difficulty","params":[50]}
{"id":null,"method":"mining.notify","params":["c9db","0xd56f859c6f1183af75dfdc3a616a81f76f01d7cbb0efa7e0a40cfd5cf485e5e3","0xef86c183c51ed4fb2d1a7eec0a752fb2eeb1731d33ae58cb9bfe54880af23e7b","0x00000002dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
{"jsonrpc":"2:0","id":2,"result":true,"error":null}
21:36:22:609 e8c parse packet: 58
21:36:22:609 e8c remove first packet 319
21:36:22:609 e8c new buf size: 319
21:36:22:609 e8c parse packet: 266
21:36:22:609 e8c eth: job changed
21:36:22:609 e8c remove first packet 52
21:36:22:609 e8c new buf size: 52
21:36:22:609 e8c parse packet: 51
21:36:22:609 e8c ETH: Authorized
21:36:22:609 e8c new buf size: 0
21:36:22:734 348 Setting DAG epoch #70...
21:36:22:827 e80 got 377 bytes
21:36:22:827 e80 buf: {"jsonrpc":"2.0","id":1,"result":true}
{"id":6,"jsonrpc":"2.0","params":["0","0x00000000000005be705af909145515803abcf9ab0cc7c778e4bd5adf07eec71a00000000000000003154bb5700000000e1e0947b54e6c673d4449a980e1324a25859f1836fd3f34bb53a3eae3bb849a5","0x0000000015fd7fe17964955fdef1ed34a2a73ae91e5fe71947db5116127c069e"],"method":"mining.notify"}
{"jsonrpc":"2.0","id":2,"result":true}
ddddddddd
21:38:54:062 1178 watchdog - thread 2, hb time 172
21:38:54:062 1178 watchdog - thread 3, hb time 0
21:38:54:062 1178 watchdog - thread 4, hb time 156
21:38:54:062 1178 watchdog - thread 5, hb time 16
21:38:56:531 e80 got 299 bytes
21:38:56:531 e80 buf: {"id":6,"jsonrpc":"2.0","params":["4","0x00000000000004e97159d865d8ce5f987ed33070aa12ab6ab4d39e046b66ad590000000000000000da54bb570000000041ff38b3641ff3662c2d84f8dc97bb008849f8f6e43b17ad414b050cdb23d98f","0x0000000015fd7fe17964955fdef1ed34a2a73ae91e5fe71947db5116127c069e"],"method":"mining.notify"}
21:38:56:531 e80 parse packet: 298
21:38:56:531 e80 sc: job changed
21:38:56:531 e80 new buf size: 0
21:38:56:531 e80 SC: 08/22/16-21:38:56 - New job from sia-eu1.nanopool.org:7777
21:38:56:531 e80 target: 0x0000000015fd7fe1 (diff: 50GH)
21:38:57:078 1178 GPU 0 temp = 69, old fan speed = 66%, new fan speed = 64%
cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
21:52:32:905 654 parse packet: 242
21:52:32:908 654 eth: job is the same
21:52:32:910 654 new buf size: 0
21:52:35:173 654 DevFee: stop mining and disconnect
21:52:35:296 1178 GPU 0 temp = 72, old fan speed = 54%, new fan speed = 54%
21:52:35:301 1178 Got incorrect temperature 511, ignore
21:52:35:304 1178 GPU 12 temp = 72, old fan speed = 45%, new fan speed = 45%
21:52:35:321 1178 Got incorrect temperature 511, ignore
21:52:35:333 1178 GPU0 t=72C fan=54%, GPU1 t=0C fan=0%, GPU2 t=71C fan=45%
21:52:35:341 1178 em hbt: 0, dm hbt: 0, fm hbt: 172,
21:52:35:343 1178 watchdog - thread 0, hb time 31718
21:52:35:350 1178 watchdog - thread 1, hb time 36703
21:52:35:362 1178 watchdog - thread 2, hb time 140
21:52:35:364 1178 watchdog - thread 3, hb time 328
21:52:35:366 1178 watchdog - thread 4, hb time 172
21:52:35:380 1178 watchdog - thread 5, hb time 31
21:52:35:684 141c ETH: put share nonce 7458b0b0001cc934
21:52:35:685 141c ETH round found 1 shares
21:52:35:687 e8c ETH: 08/22/16-21:52:35 - SHARE FOUND - (GPU 2)
21:52:35:688 e8c send: {"id": 4, "method": "mining.submit", "params": ["5adamvp.1","ca35","0x7458b0b0001cc934","0xd943ea7503e1ca7f9edf92be62154ba1e8f65d5e19540d3845427ec331a2239b","0xead3e404ddb054b0c65a210252fb39e7100ff3aa4d07c8c25275b6bdb8fbda16"]}
21:52:35:807 e8c got 36 bytes
21:52:35:836 e8c buf: {"id":4,"result":true,"error":null}
21:52:35:841 e8c parse packet: 35
21:52:35:844 e8c ETH: Share accepted (156 ms)!
21:52:35:847 e8c new buf size: 0
21:52:38:403 1178 GPU 0 temp = 71, old fan speed = 54%, new fan speed = 54%
21:52:38:409 1178 Got incorrect temperature 511, ignore
21:52:38:413 1178 GPU 12 temp = 72, old fan speed = 45%, new fan speed = 45%
21:52:41:442 1178 GPU 0 temp = 71, old fan speed = 54%, new fan speed = 54%
21:52:41:449 1178 Got incorrect temperature 511, ignore
21:52:41:453 1178 GPU 12 temp = 72, old fan speed = 45%, new fan speed = 45%
21:52:43:380 e8c send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x1ac3a22", "0x00000000000000000000000000000000000000000000000000000000424c357c"]}
21:52:43:468 e8c got 44 bytes
21:52:43:469 e8c buf: {"jsonrpc":"2:0","id":null,"result":"True"}
21:52:43:469 e8c parse packet: 43
21:52:43:470 e8c new buf size: 0
21:52:44:489 1178 GPU 0 temp = 72, old fan speed = 54%, new fan speed = 54%
21:52:44:536 1178 Got incorrect temperature 511, ignore
21:52:44:552 1178 GPU 12 temp = 70, old fan speed = 45%, new fan speed = 44%
21:52:47:570 1178 GPU 0 temp = 72, old fan speed = 54%, new fan speed = 54%
21:52:47:574 1178 Got incorrect temperature 511, ignore
21:52:47:577 1178 GPU 12 temp = 70, old fan speed = 44%, new fan speed = 43%
21:52:50:620 1178 GPU 0 temp = 72, old fan speed = 54%, new fan speed = 54%
21:52:50:641 1178 Got incorrect temperature 511, ignore
21:52:50:644 1178 GPU 12 temp = 72, old fan speed = 43%, new fan speed = 43%
21:52:53:664 1178 GPU 0 temp = 71, old fan speed = 54%, new fan speed = 54%
21:52:53:669 1178 Got incorrect temperature 511, ignore
21:52:53:677 1178 GPU 12 temp = 71, old fan speed = 43%, new fan speed = 43%
21:52:55:332 e8c got 267 bytes
21:52:55:332 e8c buf: {"id":null,"method":"mining.notify","params":["ca36","0x7f2e0ff7dfadc06289f4293c418e674e8856e78f5371eef2f8212305544d8ca3","0xef86c183c51ed4fb2d1a7eec0a752fb2eeb1731d33ae58cb9bfe54880af23e7b","0x00000002dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
21:52:55:333 e8c parse packet: 266
21:52:55:334 e8c eth: job changed
21:52:55:335 e8c new buf size: 0
21:52:55:336 e8c ETH: 08/22/16-21:52:55 - New job from eth.coinmine.pl:4000
21:52:55:338 e8c target: 0x00000002dd01fc06 (diff: 1500MH), epoch #70
21:52:55:341 e8c ETH - Total Speed: 28.524 Mh/s, Total Shares: 22, Rejected: 0, Time: 00:16
21:52:55:345 e8c ETH: GPU0 0.000 Mh/s, GPU1 17.279 Mh/s, GPU2 11.245 Mh/s
21:52:55:367 e8c SC - Total Speed: 427.856 Mh/s, Total Shares: 12, Rejected: 0
21:52:55:370 e8c SC: GPU0 0.000 Mh/s, GPU1 259.189 Mh/s, GPU2 168.667 Mh/s
21:52:56:717 1178 GPU 0 temp = 71, old fan speed = 54%, new fan speed = 54%
21:52:56:763 1178 Got incorrect temperature 511, ignore
21:52:56:772 1178 GPU 12 temp = 70, old fan speed = 43%, new fan speed = 42%
21:52:59:798 1178 GPU 0 temp = 70, old fan speed = 54%, new fan speed = 53%
21:52:59:803 1178 Got incorrect temperature 511, ignore
21:52:59:806 1178 GPU 12 temp = 70, old fan speed = 42%, new fan speed = 41%
21:53:02:824 1178 GPU 0 temp = 70, old fan speed = 53%, new fan speed = 52%
21:53:02:828 1178 Got incorrect temperature 511, ignore
21:53:02:831 1178 GPU 12 temp = 69, old fan speed = 41%, new fan speed = 39%
21:53:03:414 e8c send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x1378863", "0x00000000000000000000000000000000000000000000000000000000424c357c"]}
21:53:03:518 e8c got 44 bytes
21:53:03:518 e8c buf: {"jsonrpc":"2:0","id":null,"result":"True"}
21:53:03:519 e8c parse packet: 43
21:53:03:520 e8c new buf size: 0
21:53:05:861 1178 GPU 0 temp = 71, old fan speed = 52%, new fan speed = 52%
21:53:05:902 1178 Got incorrect temperature 511, ignore
21:53:05:921 1178 GPU 12 temp = 70, old fan speed = 39%, new fan speed = 38%
21:53:05:937 1178 Got incorrect temperature 511, ignore
21:53:05:942 1178 GPU0 t=71C fan=52%, GPU1 t=0C fan=0%, GPU2 t=70C fan=38%
21:53:05:943 1178 em hbt: 0, dm hbt: 0, fm hbt: 47,
21:53:05:944 1178 watchdog - thread 0, hb time 62328
21:53:05:945 1178 WATCHDOG: GPU 0 hangs in OpenCL call, exit
21:53:05:946 1178 watchdog - thread 1, hb time 67313
21:53:05:947 1178 WATCHDOG: GPU 0 hangs in OpenCL call, exit
21:53:05:948 1178 watchdog - thread 2, hb time 219
21:53:05:949 1178 watchdog - thread 3, hb time 32
21:53:05:950 1178 watchdog - thread 4, hb time 32
21:53:05:951 1178 watchdog - thread 5, hb time 203
21:53:06:959 1178 Restarting OK, exit...
Yesterday I guess it was pool - related... because it happend when sia.nanopool stoped working, but one of my cards is a little faulty as you can see.. In event viewer I can saw: Display driver amdkmdap stoped responding, but recover stability (but after that my miner hangs so I had to make hard reset) .I look further in my log and I wonder what it is:
21:53:05:902 1178 Got incorrect temperature 511, ignore
21: Another strange thing is that works better before I upgraded to 6.2... Can you give us any help Claymore? *eth only mode seems to work ok.. |
|
|
|
I have the impression that claymore handles unstable pool somewhat conservative comparing to genoil+mining proxy(dwarfpool version), the issue is with going back to original pool when connection is recovered, is there any way to change setting so it goes back to primary pool as soon as possible.
Yes, here you have: -ftime failover main pool switch time, in minutes, see "Failover" section below. Default value is 30 minutes, set zero if there is no main pool. |
|
|
|
There was short break in mining 2hours ago:http://etc.nanopool.org/account/0xbc2e6739781028ebcac5dd81c60f85470d26c621 In sia too. I have two rigs: linux and CDM 5.3 which resumed after that break And Windows with CDM 6.2 which hanged with whole rig... Additionaly : now I switched to eth only Mode on epool. Works fine but I have no worker on stats page: I have such line in epool. Txt POOL: uk1.epool.io:8008, WALLET: 0xbc2e6739781028ebcac5dd81c60f85470d26c621, PSW: x, WORKER: rusMineruk, ALLPOOLS: 1
POOL: uk2.epool. :, : , : x, |
|
|
|
|
Show Posts
