-snip-
My apologies for going off-topic but which RPC command gives you this listing? On a stock 0.21.0 I can get a "relaytxfee" field (which says 1 sat/vbyte by the way) if I use getnetworkinfo but that's the closest I could get. He's currently offline, but I believe the command with that result is getmempoolinfo.
|
|
|
I'm completely lost with all of this, if anyone could further help me, I'll leave my discord bellow. I've never used a BTC wallet before. So it's all very confusing. -snip-
Let's try common terms: The negative balance that you're seeing is just displayed beside your current balance because it's " pending". Once it got " processed", it will be deducted from your current balance. But it comes with a fee so, it may be higher than what you've input in the send tab, it depends on the 'fee rate' that you've selected in the slider and the size of the transaction ( not amount). To check the details, go to the history and double-click ( under the date column) the unconfirmed transaction with " red" amount.
|
|
|
Hi All - No luck on getting this figured out, but I really really appreciate all the responses.
Try variations while following post number 2. Because the " custom word(s)" can be the 13th, 14th, 15th to 16th words. So in Electrum, you should only paste 12 in the " enter seed", tick both boxes in the " Options", and if it says " BIP39 (checksum: ok)", proceed and click " next". If false it's not a 'BIP39 seed', uncheck BIP39 and see if " next" is clickable, if not, it's not an 'Electrum seed', If 12 didn't work, try variations like different number of words ( first 3,6,9,15) with 'BIP39' ticked. In the next window, paste the 'rest' of the words, 'two' or 'last' of them; then finish creating the wallet and see if your address shows up in the address tab ( "View->Show Addresses" to display), if you don't know an address from your wallet, wait for a few minutes to sync.
|
|
|
Based from an example in the pull request's comments ( bitcoin/pull/15935), it should take some settings from the bitcoin.conf file but in json format. I don't know if all or which settings will work though. I've tried some, example1 ( disables wallet function): example2 ( produces legacy addresses in the receive tab): { "addresstype": "legacy", "wallet": [ "", "Wallet_first", "wallet_from_v0.xx.dat", "Wallet_second" ] }
|
|
|
Hello, here is around 6 days, I bought some bitcoin, after they sent them, I did not receive anything because the transactions remain unconfirmed for 1 week. In addition, only one of the two appears in the blockchain, one of the two seems to be in another blockchain (mempool)
The problem is: despite the very high fee rate of those two transactions, their parent transactions are both unconfirmed with very low fee rate. So miners are considering them as " bundle" parent and child transactions, and the fee rate will be based from their total size and fee. Your transaction: 6cdb98f9c86ef7902ee991d44e013307662086322dc41ee392584daac8b12d11 with 100.1 sat/vB fee rate has two inputs which are both unconfirmed, namely: 1. 0ba52bed104cea1075754f783867d423ae9510bd4d6fb3f3905aaf7e1862fd9d @ 7.0 sat/vB. 2. fe682ab28ecdb3bc82498af0c7730e2fcb0cf8563c6fc88cc2367c16aa3624a0 @ 10.0 sat/vB. Both the transaction's sizes are too large and the fee rate too low for the child transaction to accelerate them effectively. let's say that there are no unconfirmed transaction in the parents' inputs ( I didn't checked because there are hundreds of them), the total size of the batch would be: 699 vB + 27904 vB + 16106 vB = 44,709 vBthen the total fee would be: 70,000 sat + 195,860 sat + 161,530 = 427,390 sat fee; that's a total of 9.56sat/vB fee rate[/b]. Currently, 9-10sat/B is @ 20vMB from tip of mempools. The other transaction may be missing from time to time because the parent's input parent's fee rate range is beyond the default maximum size of mempools.
|
|
|
I have 32gb of ram and its ssd, ok database cashe increased to 16gb, think this around the max it wont let me do 17000. Much better progress now 2.5% ph, was 0.3, hopefully itll increase later in the day once people finnish work.
If you mean because then there will be more network bandwidth, the speed of the sync isn't really dependent on the network bandwidth much at all. Granted, it still has to download 350+ gigs of data, but ny "broadband" connection should not bottleneck the syncing process unless it is being severely throttled/rate limited... The main bottlenecks are really in the disk I/O and the CPU processing. Philipma did a benchmark using a similar specs in a thread somewhere in Bitcoin Technical Support board and he thought that the bottleneck is his ( 200mbps) internet since he's using an SSD and latest hardware. Here's the link: Re: Faster sync would be nice (i.e. soooo slow)Summary: with the latest specs and fast internet speed, he's able to sync Bitcoin Core in just 6hours, garyf22's internet may be slower but his specs should be similar. What he didn't accounted is the download speed will also be based from his peers.
|
|
|
Increase your " database cache" to a reasonable amount like half of your RAM as long as the capacity isn't used by other programs, default is too low. The option is just below 'pruning', then restart Bitcoin core. its downloading now Im at 30%, Ive just checked the prune box is unchecked, all good?
It will be slower when you reach 70-90%.
|
|
|
From the looks of it, OP is confused of lightning and he thought that mainnet and lightning funds can be sent though either network. what if you send the bitcoin to a legacy wallet non wetsig/lightning will you loose the bitcoin or can the transaction be cancled
Let's say that you already have an open channel and you go to the send tab: If you paste a Bitcoin address there, Electrum will send a normal transaction and spend your on-chain funds. If you paste a lightning payment invoice there, Electrum will initialize a lightning payment. It depends on what you've pasted; bitcoin addresses, on-chain payment invoice ( eg. from payment processors) and lightning invoice ( long string that should start with 'ln') are very very different from each other, you do not have to worry about losing funds. And read Abdussamad's reply. P.S.: it's " SegWit" not " WetSig" ( sounds kinky) ![Lips sealed](https://bitcointalk.org/Smileys/default/lipsrsealed.gif)
|
|
|
Pls help lol ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Σ(  ̄□ ̄||) all I know is that he got some sort of email to confirm it, verification code was probably a wrong choice of words lol
Are you sure about the year? Bitcoin was just released that year and it's hard to imagine that a service that gives some sort of " verification code" existed. You might need to search for a private key that your dad might have exported from Bitcoin core through a third-party program. That should look like a string of HEX Characters ( 0-9, A-F) consisting of 64characters; if newer that you expected, 51 BASE58 characters that starts with '5'; or much recent, starts with 'L' or 'K'. Also look for a file named "wallet.dat". One the side note: with all those " lol", it's hard to take this seriously.
|
|
|
So my dad got 100$ worth of bitcoin back in 2009, he got a 'verification code' to his old email but forgot about it afterwards. -snip-
The " verification code" part is not promising, because if it's from 2009, then he must have used the official client which doesn't have a verification code. Pls help lol ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Σ(  ̄□ ̄||)
|
|
|
The box with prune block storage is ticked at 2gb, ok here goes the move, ok done many thanks. Hopefully once the remainder downloads Ill be ok.
Note: Bitcoin Core won't download the " remainder", it will sync from start all over again. Also, you need to close it and run again after unchecking the box to disable pruning.
|
|
|
If the transaction has been flagged as RBF, you won't see "CPFP" option in right-click menu and you will see "Increase fee" instead of that. If the transaction hasn't been flagged as RBF, you should see "CPFP" option.
That's it, so Electrum will automatically disable the feature when RBF is available, that's a well-thought feature. Must be because it's not efficient to allow the sender to create another transaction to accelerate the one that can be RBF~ed. I haven't tested that factor, thanks. Anyways, the CPFP will only able to send to his own wallet, being able to use 'coin control' will allow him to use the coin for his next payments/transactions instead of sending back to himself. btw, would eth be a decent alternative for times when the network is clogged?
In terms of dollars equivalent, yes for now.
|
|
|
In the "coin control" step, you must select the change of the stuck transaction because if the wrong coin was spent, it won't be considered as CPFP. To check the change, find the 'stuck' transaction in the history tab and take note of the details specially the txid and the address which will be displayed as "output point" and "address" in the 'Coins' tab.
There is no need to use "Coin Control" feature. It may be difficult for a newbie. The easiest way to implement CPFP method in electrum is to right-click on the transaction and select "Child pays for parent". For some reason, it wont appear in the " sender" Electrum even if one of the outputs belongs to that wallet, tested in testnet Electrum v4.0.9. So if it doesn't appear at his end, he must use coin control.
|
|
|
If you don't have other unspent transaction outputs (inputs) in your blockchain wallet, any new outbound transaction will be considered as CPFP because it will guarantee that the change of the "stuck txn" will be spent. If I understand you correctly.. Unspent - do you mean if I have funds in my blockchain.com wallet? And by (any new outbound transaction) do you mean other transactions out of my blockchain.com because since 15 Feb I sent two transactions from the same wallet to other external wallet and they were confirmed relatively quickly. I was hoping those transactions will trigger something to make the unconfirmed transactions be confirmed... or Am I getting it totally wrong..? Okay, since the two transaction after the stuck one were already confirmed, then it's change must have been left unspent by the wallet, those didn't affected the stuck transaction at all. Because if its change was used, the transaction that spent it must be mined together in a single block ( at the same time). I might have to try this out... I really appreciate your help thank you so much.
In the " coin control" step, you must select the change of the stuck transaction because if the wrong coin was spent, it won't be considered as CPFP. To check the change, find the 'stuck' transaction in the history tab and take note of the details specially the txid and the address which will be displayed as " output point" and " address" in the 'Coins' tab.
|
|
|
I know it's solved without explanations but for safety purposes: Next time, you must not directly open a backup of the file because Electrum will try to upgrade it and if corruption occurs, you'll lose your digital backup. It's best to copy the file and use that copy instead. I have resolved the issue but cannot delete the post. Thanks anyway.
Please reconsider this reply by hugeblack from your previous thread: Problem resolved, but not allowed to delete my own post. Why do you want to delete the topic? On the contrary, it will be better for others as they will find the answer directly without asking again or searching on Google. Generally how is your problem solved? -snip-
|
|
|
Could it be because I did free trade advisors so it's delaying me?
No, it's as explained by the first two replies. It's best if you can at least try what's been suggested; there's also a chance that it will get a confirmation during this weekend since there seems be a downtrend in the average mempool size, but please don't expect it. Lastly, if you find it hard to understand the replies, you can post in your local language instead, here in the local boards: Local Boards, if your language isn't in the list, select " Other languages/locations".
|
|
|
Do you have a way to contact the receiver? Because the only way to accelerate this is for him to perform CPFP to the output; How do you know when a deal will fall?
If you can not contact the receiver and you want the nodes to drop it after approximately two week since last broadcast, just do not " re-broadcast" it using push or ( fake) accelerator services so it won't linger longer than 14days in the network. Also, some nodes must have already dropped your transaction due to limited mempool size but reacquired it from the nodes that kept it, that might've extended the days before it get fully dropped. Lastly, depending on the wallet, creating a new transaction after it was dropped can be easy or hard ( like requiring some commands, etc.)
|
|
|
I assume it rejects the transaction because I am trying to spend an input that is not yet confirmed. However, what if I want to spend that input on a CPFP transaction to broadcast the original transaction faster?
It should return " true" even if the inputs aren't included in a block. It's probably because the parent is currently " not in memory pool", using sendrawtransaction to the parent before attempting to use testmempoolaccept to the child should work.
|
|
|
-snip- and the fee is soo low that ViaBTC won't accelerate the transaction...
Not too low but it's only 20satoshi short to reach exactly 10sat/B for Viabtc's free accelerator, that's unfortunate. At this point, I don't know what else to do... I checked at https://pushtx.btc.com/ to see an estimate, to get it pushed up and it gave me an estimate of $210+ USD🙆😱. Any suggestions... I'm open to any suggestion at this point. Doing a CPFP will do. If one of the two outputs is your change, all you have to do is to spend it with a relatively higher fee than the recommended. Problem is your client, blockchain.com doesn't have " coin control" to be able to select inputs. If you don't have other unspent transaction outputs ( inputs) in your blockchain wallet, any new outbound transaction will be considered as CPFP because it will guarantee that the change of the " stuck txn" will be spent. Alternatively, if your have other inputs, you can import the wallet's " recovery phrase" to Electrum and spend that transaction's change using these tutorials: Please be careful with the recovery phrase, read the warnings. Compromising it will lead to loss of funds.
|
|
|
I know it is possible manualy with other (Blue) Wallet, but I'd like to know if it is possible in Electrum and automatically?
That's technically not possible but since Blue wallet's lightning is custodial, funding the channel is as easy as depositing the change to your " lightning external refill address". Electrum however doesn't work that way, you'll have to fund your channel(s) through lightning transaction from a third-party that accepts on-chain funds. It has the " swap" feature but it wont accept small amounts like the typical change and it comes with a ( third-party) fee. We don't want to mix input addresses to avoid weakening our privacy.
In comparison, sending to the same address also " mix" or rather " link" those addresses, blue wallet's lightning refill address doesn't change AFAIK.
|
|
|
|