Acho que juntou tudo, sentimento de curto prazo do mercado, pessoas que foram pegas de surpresa por essa mudança talvez. Esse fim da temporada 19 foi complicado, teve reset de ranking agora que finalmente estava conseguindo ganhar bastante slp ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Agora vai um tempo pra subir novamente, fica muito doido após reset e leva um bom tempo até os times alcançarem o seu ranking de equilíbrio. Faz um tempinho que não jogo, acabei passando o time pra dois amigos, mas vi o quanto foi difícil essa temporada, ainda mais que era time de 2 peixes + planta e como os axies estão super baratos de novo, acabei comprando um axie novo pra cada para tentar melhorar o time Vamos ver APR alto não importa se todo mundo acha que o mercado vai cair. Olha o resto das moedas ai… AXS e SLP é o de menos. BTC -10%, ETH -13%, SOL -13%… Ainda adiciona a insatisfação dos players com as mudanças no jogo, SLP em uma ladeira constante, reset para o rank 1200, etc… e temos isso. Pensando até em vender meus últimos times. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Estou vendo mesmo que não importa rs, está tudo sangrando novamente Já tem vários relatos por aí que os scholars estão desistindo Pra passar raiva jogando, pra ganhar 300 reais por mês também acho que já não compensa, o mínimo que calculo para valer é pelo menos ganhar uns R$ 400,00 pra jogar, o que seria uns 3300 SLP mensais, bem difícil nos dias de hoje sendo scholar com 50% de share Eu sei que o axie está "no começo", mas esse começo está demorando bastante, não adiantará muito ser só o começo, se lá no meio õs jogadores já estiverem cansados e desmotivados
|
|
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.ibb.co%2FHDkGR6g%2Fchart.png&t=663&c=N6WMW5dzUiWbUg) Fonte: https://coinmarketcap.com/Será que já podemos começar a pensar e nos planejar melhor para um bear market ou ainda não? De ATH 69k pra 65, 60, 55, 50, e agora já batendo 44k USD
|
|
|
Não sei se estão acompanhando, mas no Cazaquistão está tendo protestos pesados (cof cof, poderia ser no Brasil) que começaram por causa do preço dos combustíveis e virou uma bola de neve, até o governo foi derrubado. Acontece que no Cazaquistão é onde foi parar muitas máquinas de mineração provindas da China e seu 9999º banimento A empresa de telecomunicações estatal desligou a conexão de internet e a rede acabou perdendo um pouco de hashrate Leiam aqui a fonte: https://cointimes.com.br/corte-de-internet-no-cazaquistao-pode-afetar-mineracao-do-bitcoin/Será que isso foi um dos motivos da queda acentuada nos preços de hoje?
|
|
|
Hoje o calculo oficial saiu, APR reduziu para 88%. O mercado está caindo um pouco agora bitcoin -3% mas axs -11% parece que algumas pessoas estão liquidando pois o volume está bem acima da media comparado com os ultimos tempos.
Credo, só agora que vi Ontem fiz o restake e estava uns 92 ou 94 dólares e hoje já está em 82 Será que o pessoal acha 88% 87% APR tão ruim assim? A temporada 19 do axie acabou, pessoal que ganhou AXS deve estar vendendo, juntando com a redução da APR e o mercado em baixa...sei lá quando isso acaba ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
We're finally seeing a proper decoupling from the stock market, which bitcoin has been following chaotically for a decade. The stock market is poised to perform exceptionally well this year as bitcoin continues its fated collapse.
It's you again ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) How about Bitcoin will never maintain above 10k for 3 weeks, right? ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
Feliz ano novo a todos!!!
Vou arriscar 3 previsões:
1 - ETH ainda não conseguirá migrar para PoS novamente, vai rolar para 2023
2 - Dólar não baterá R$ 6,00 (sim, vou na contramão, mas parece que o teto vai ser algo próximo do que estamos, nos 5,60 a 5,80
3 - Depois da variante Omicron, a Covid irá diminuir drasticamente lá pelo meio do ano o mundo estará retomando tudo e segundo semestre vai ter uma entrada massiva de dinheiro em ações e criptos, nenhuma bolha irá estourar em 2022 ainda, nem mesmo dos EUA
|
|
|
We discussed this thread twice in past weeks You can chek here: https://bitcointalk.org/index.php?topic=5378742.0And here: https://bitcointalk.org/index.php?topic=5376172.0I agree with philipma1957, ETH POS is not close yet, even if they delayed difficulty bomb to june 2022, I think they will delay again, ETH is not ready I think that Nvidia, AMD ,Intel do not want eth to end pow
I don't know Intel, but AMD and Nvidia have tons of money since 2017 because of mining Both companies probably earned more money than 4 or 5 generations of only gaming cards
|
|
|
Ok thank you very much for the answer, the cards are connected on a x16 port, directly on the motherboard (AsRock BTC+ H510), do you say that's not good ? Then another question, to update the drivers to version 470.05, is it ok if I take one card at a time, put them on a computer with windows, load the driver and put it back in the rig with another operating system? (SimpleMiningOS) One card is connected to a monitor, but the other 3 are not. But the hashrate is the same.
So, we can exclude PCI-e speed and monitor plug Drivers are installed on your OS, not on the card, maybe you're confusing with bios, but you need to install drivers on your operational system Try windows, you probably have windows installed on your PC, and if you can install 470.05 drivers, you'll find the solution
|
|
|
I think 3060s are the most problematic series in this generation ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) If your cards are not LHR, there 3 things to look: 1 - Drivers 2 - PCI-e 8x 3 - Monitor plug 1 - As Williamm07 said, try driver 470.05 2 - Try to connect one card directly to motherboard, some people related 3060s didn't work well with less than PCI-e 8x speed 3 - Try to connect cards in a monitor, or a dummy plug, maybe the card needs to be connected to achieve maximum hashrate These 2 videos are good to start: https://www.youtube.com/watch?v=yE2Kmb3ZHEQhttps://www.youtube.com/watch?v=uDiEOscA2vw
|
|
|
Are you saying it's possible for ETH to grow over 4k in 2022? I think that's impossible because crypto have already grow so much higher than what we've seen in crypto history, there must be time for retraces in value, saying ETH can go 6k means bear market isn't ever going to happen which sound too good to be true to me
Of course it's possible to ETH reach more than 4k in 2022, why not? The rewards in crypto is awesome because nobody knows what's going to happen in the future, even whales can be tricked by bigger whales or even retail Yes, we can see retrace, we can see crashes, ETH can crash to lower than 400 USD again, it's possible, but we have the same chances to ETH hit 5k, 6k, or even 10k USD Nobody has unlimited money to keep buying it, so if there is no hype anymore it will crash very hard.
Yes, nobody has unlimited money, but there's plenty of money to enter crypto market, 2.2 trillions USD is not the peak, I really believe year after year cryptos will gain some percentage compared to stocks and in a few years market will be stronger, like 5 to 10 trillions USD But yes, we can see a crash again
|
|
|
Out of nowhere crypto may start going nuts again.
Oh yes, you're right I forgot to say that, I only wrote about possible things to happen to reduce gpu prices, but there's a chance to prices go up in 2022 and scarcity become even worse Let's say ETH continue to 4k USD, it's profitable and people will keep buying at this pace But what if ETH jumps to 5k, 6k, 10k USD? It's not impossible and these prices can create another spike
|
|
|
Hard to predict ETH delayed difficulty bomb until june 2022, and at this price, people will continue to buy gpus but we have to consider more things: new wave of covid, inflation, lack of supply, high costs of shipping etc
All of these above are causing insane prices, and honestly, I don't see a brighter future in a few months to buy "cheap" gpus yet.
About rtx 4xxx series, I heard some rumours about launch at october 2022, and even then we have no guarantee that there will be good availability of gpus to sell you see, hard to predict something
|
|
|
thank you very much for your answer and your help, you are very kind.
![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Thanks again Once I found the core and memory clock values, how do I proceed for the voltage values?
It's the same as you're doing, step by step Memory controller voltage have default value of 850mv Memory voltage is 1350mv Core voltage I think it's 984mv You can put these manually, and reduce little by little, but only if you want to reduce temperature or power consumption, if you are satisfied, you can leave stock Let's say for first test you can set to: Memory controller voltage have default value of 840mv Memory voltage is 1330mv Core voltage I think it's 964mv And another question was if the clock should I leave it stable at 1300 or even that I have to increase? Now I started as you said with 1300 clock and 850 memory, and I wanted to see if it is stable for 1/2 hours, then I will increase. Without overclocking it was stable for 5 hours without any problems.
For core clock, most of cards will work good with 1300, you can reduce and card will save power, but will reduce hashrate I prefer to leave at 1300mhz, but it's up to you You see, without overclocking your rig is stable, you found the problem, I think this is the best way to find and fix problems with rigs and PCs in general
|
|
|
Com tanto ficheiro fiquei baralhado. Obrigado. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Configurado e a correr o T-rex, temos isto: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.ibb.co%2FfMW1QVP%2Ftrex2.png&t=663&c=RNDyA2B14EruHg) Simplesmente incrível! Esta a fazer 48 MH/s! ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) Mais do que a maioria das analises que vi, que apontam para os 44 MH/s. Obrigado pela ajuda @rdluffy Era mesmo uma questão de software. Joker, fiquei feliz que deu certo ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Acho que agora é só refinar o overclock, provavelmente esse hashrate tão alto pode travar em algum momento, então na minha opinião você pode baixar um pouco o clock das memórias para não ficar no máximo e gerar invalid shares ou travamentos. E depois tentar ir baixando o power limit pra consumir menos, até onde você achar que está bom o hashrate Mas parabéns, que bom que deu, 31Mhs era muito pouco pra essa placa
|
|
|
thank you so much for your response and help, I really appreciate it.
Don't worry, we are here to help each other ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) One thing I did not understand, is what it means to put the rest in stock. Does it mean don't put any memory voltage and memory control voltage fields?
Exactly, because your overclock is unstable. If you try to modify all the settings at the same time, it's a mess to find which setting is the problem, so you leave voltages at stock and only modify the clocks first Tonight I will try to do as you say, set core clock to 1300, put memory clock at 850 and the fan on 80%. and if it works I will increase the clock until it stops working right ?
Yes, right, you start with 850, and then 875, then 900, 925...until crashes and you'll see the limit, and you'll use the last stable clock
|
|
|
Hi, I've tried running the GPU without overclocking settings and after 2 hours it still hasn't rebooted and remains stable at 32MH/s, so I think it's the fault of some overclocking settings. The overclock settings I was using were: Core clock: 1250 Memory clock: 870 Core Voltage: 725 Memory voltage: 1300 Memory control voltage: 800 Can you tell me what to change or why with these settings the rig restarts every 10 minutes and without it works fine?
Let it running for a couple of hours, just to be sure It's simple, your card can't handle the settings you put on overclock, as I said, every card is different, each piece of silicon is different, even in same model of GPUs Look at above, philipma1957 put his config I have 5600XT too, Asus, with Micron memories, and my settings are: Core clock - 1299 Memory clock - 925 Core voltage - 805 Memory voltage - 1325 Memory Controller voltage - 845 In your case I would do overclock step by step, put your clock at 1250 or 1300, and set your memory at 850, fan speed to 80% and everything else on stock, and you will test, if works, put more clock on memories, until crashes, and then get back 1 step to the last stable clock After that, and only after that, you can change the rest of settings
|
|
|
Olha a configuração: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.ibb.co%2FDVRrDnt%2Fgpu2.png&t=663&c=-6tQxjjM84RhjQ) Algo errado!? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Vou testar esse miner. EDIT: Como é que configuras o T-Rex? Vi tantas opções fiquei baralhado. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Parece tudo certo, sua placa deve aguentar o máximo de +1800mhz nas memórias, seria interessante reduzir um pouco depois, mas vamos tentar aumentar esse hashrate aí primeiro pra ver até onde a placa chega Depois de baixar o T-rex, descompacte e você terá esses arquivos: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.ibb.co%2FLnqwMHT%2Ftre.png&t=663&c=YWZf-wwXfTRz3Q) Se você usar a Ethermine, vá até o arquivo ETH-ethermine clica com o botão direito e escolha editar, aí você vai editar com o bloco de notas mesmo Ele fica assim: t-rex.exe -a ethash -o stratum+tcp://us1.ethermine.org:4444 -u SEU ENDEREÇO DE CARTEIRA -p x -w NOME DA SUA RIG pause
Você vai alterar o endereço da sua pool, note que já tem arquivos pré configurados para as outras pools, coloca seu endereço de ETH e um nome pra sua rig, só isso Depois salve e clica duas vezes pra abrir
|
|
|
hello, at the moment I am not using any riser board, the overclock settings are mandatory and I am using the recommended ones, but with none of them works. As operating system I use SimpleMining that on the other rigs works perfectly. Cables and connectors I have changed them but nothing changes. I've used phoemix and teamredminer and neither works for more than 10/15 minutes without rebooting.
You need to test without any overclock, remember, you're trying to find the error, with overclock you're not doing right Every gpu have it's own properties, and even with the same models, each one is different to achieve clocks and power So, to test, it's important to be at stock settings If works in stock, you'll know your overclock is high and you can start at stock and increase a bit until crash again And last, try another OS, even if you have Simple mining working in another rigs
|
|
|
My country is the number 1 in lightning strikes, and I use a surge protector Before that I used to be worried when started to rain, but not anymore, it's important to buy a good surge protector, because there's a lot of cheap power strips with no protection inside It's cheap and worths the extra protection I use this one here but I don't know about the models and brands available in your country ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.ibb.co%2F4RgpRX4%2F01-i-CLAMPER-Energia-5.jpg&t=663&c=L1pbM3JDBhpYLA) In the long run, it's cheaper to buy one of these instead of turn-off your miner in some rainy days
|
|
|
Com essa configuração, ficou na casa dos 30.9 MH/s. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) A configuração da qual consegui obter os tais 33.5 MH/s foi: Power Limit - 75 Core Clock - não mexi Memory Clock - +1800mhz Fan Speed - auto O que estarei a fazer de errado? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Vou ter de testar outra plataforma, sem ser o Nicehash. Deixa o power limit em 100 então, pra ver qual é o máximo que a placa vai chegar, sem ser afetada pelo power limit Outra coisa, não entendi o 1800 mhz, como que você conseguiu colocar tanto overclock assim? Se não me engano, o MSI afterburner coloca no máximo + 1500mhz nas memórias E por último, testa com o último miner do Trex: https://github.com/trexminer/T-Rex/releasesc
|
|
|
|