looking for them here too in the usa, the 1200 watt supplies are just too damn loaud man
|
|
|
does anyone else get hash drops on one card? when using one card it works great, but with 2 or more cards i get drops on one card ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Fs0R5DEH.jpg&t=663&c=mAFBOhaj5r4yjg) Yup i have been seeing this periodically I posted earlier, something seems fishy here, happens on random machines once at least a few every day, non of these rigs displayed issues like this before
|
|
|
robinh00d will owned all of your coins, lol
google 0day.
lol anythings possible
|
|
|
2.10 still doesn't do much on sites like Zpool , litecoin pool or Prohashing.com .. it works great on nice hash but I don't care much for nice hash .. and it is the same issue, it show it mining at 137 to 138 MH miner side and on the POOL side on some pools it some times only goes as high as 120 to 128 never a good sable 138 or close,
You have unrealistic expectations. You NEVER will have a long-term match on "miner side" reported hashrate and "pool side", as you will always lose a little on stale shares and such. Doesn't matter what miner you use or what algo, this is the norm on EVERYTHING in crypto.nuy Pools report your hashrate poolside based on the VALID SHARES you have found. Variation is ALSO normal, due to that fact. sigh then how come my Alchemist miner runs at a steady 137 to 146 on five boards some times higher pool side like it should, this one barely hits 128 most of the time stays around 121 to 124 and shows at the miners UI 137 to 138 MH, you want Screen shots, i can give them . "as you will always lose a little on stale shares and such". < I'm very a ware of that but not like this .Id be happy with 130 to 132 pool side, best it hits pool side is 128 unless it's nice hash. and Innosilicon even told me in a email they are aware of some pools under hashing which it seems now might never be fixed like the Alchemist was. if i mine Lite coins on Antpool id be lucky if it hits 110 mh while my Alchemist miner runs @ 134 or higher it all depends what pool it is for the A4 . I'll bet the L3 + runs around what it suppose to any place . which i hope to have A L3+ soon i may post Screen shots once i do . I guess what i should watch more then anything is pay out which i don't ... . i was able to improve the speed and shares some the other day by giving the miner full api Access by editing some files in the controller with SSH . I loved the upgraded alchemist miner , drew alot of power but was awesome wish i had kept the three i had
|
|
|
same me. msi 480 gaming x 4Gb hynix Vram Can up to ~31mhs but miner can't work long time and to use total 580W . 3 vga+main... . In the CPUZ is 120~130W ![](https://ip.bitcointalk.org/?u=http%3A%2F%2F2.pik.vn%2F201755b52bf0-f6d5-4d20-82de-4a7cc9f91d03.jpg&t=663&c=0buj3QxvUACfMw) I adjusted speed down to 29mhs and to use total 465W . CPUZ use 83W/Vga ![](https://ip.bitcointalk.org/?u=http%3A%2F%2F2.pik.vn%2F2017f203ecd2-0c07-44d3-8154-c97e00d4599d.jpg&t=663&c=IGbQQd4fO6Azmg) Your consumption is very high And had to go back to the previous driver Because of the error it crashes with code 52 because it is not signed: \ so you are saying even though you set the wattage to -96 in afterburner the wattage does not drop ? even with the newest version of the after burner beta? I set all these on mine and i see the core voltage go down
|
|
|
I dont know if its bug with the drivers or the 9.8 version of claymore but on about half my machines
the hash rate goes from 28ms or so to 8 and stays there till i have to reboot the rigs
|
|
|
This driver is strange much like the latest official release. Power use is up a good bit... I raised all the cards in this rig from 105 to 115 and lowered the voltage via bios from 937 to 912. AB shows 8.88x volts but the power is still high. https://image.prntscr.com/image/jqtvXR4bSOWDelQcGMk_Vg.pngScreenshot of AB graphs. This rig is 5x570. I'm not sure if voltage is wrong or if something else is causing high power usage (which throttles these cards). Edit: This was dual mining. Even on ETH only I'm at like 100w which is +15w or so from the driver I typically use. I cant even solo mine due to heat issues but this could be related to the issues i see, a permanent throttling of the cards due to higer power ussage than it should be , fans are all and 90% when before i was at 75% temps are up as well
|
|
|
I dont know if its bug with the drivers or the 9.8 version of claymore but on about half my machines
the hash rate goes from 28ms or so to 8 and stays there till i have to reboot the rigs
|
|
|
I have to say, the 0810 BIOS is best. I just recently added a seventh card to my z270-p that had a 0610 BIOS and it was crashing every 5-10minutes, updated to 0810 and made the necessary gen1 change. viola, works great.
can we have 8 gpus and the onboard graphics at the same time?
yes
|
|
|
Anyone here with a R9 280X care to test it out and see if it makes a difference?
I though the eth hash rate bug was polaris only ?
|
|
|
I heard that the AMD Fire Pro 17.Q3 driver already has the DAG size fix. You can install it for RX 4xx/5xx without a problem AFAIK.
I tried the latest fire pro drivers and they would not install on a 480/470 box
|
|
|
confimed to work
and with the latest beta version of AB you can adjust clocks and voltage like before
will send .1 eth
thank you
AMD is back!!! suck it NVIDIA lol
|
|
|
it worked 4 me on my asus strix rx 470 4gb elpedia memory 1850 mhz back to 27-28 mhs was down to 25,5 mhs .... problem is there is no good overclocking tool available vor the newest beta driver tryed the newses afterburner beta 4.4.0 beta 12 but no effect on the gpu drivers and with claymore i can set core speeds and memclocks but the voltage control has no effect in claymore so the crad pulls alot of energy and starts to throttle after 5 mins of mining and then the speed gets slower than with old drivers 16.11.5 cause there i can undervolt.... so for me the new drivers from amd are a step back lol what the hell do they think they are they cant ignore the mining market anymore its damin huge and they make alot of money must feel good for them after years of looses... hehe still nvidia is the king the cards are more durable and stable and you dont need to babysitting them like you have to with your amd cards hehe
yeah maybe if your cards are stock this fix works but not for modded cards with high straps, udervolting is a must on AMD
|
|
|
Batch 3 (Aug 03) 35,000 Units
bullshit. sales were open for ~1hr, that's 583 units per minute. not likely. yeah probbaly trying to scare ppl off
|
|
|
D3 Batches.
Batch 1 (July 18) 250 Units Batch 2 (July 20) 3,300 Units Batch 3 (Aug 03) 35,000 Units
Source Insider @ Twitter
Now who order on July Batch must be laughing hard... Damn lucky
If 35,000 were sold on the october batch i dont thinking anyone will be laughing ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) how much will that raise the global hash rate
|
|
|
Theese boards are a little bit tricky but once you get them to work they work like a charm .... I lost like 3 days to get CARBON board from msi to work with 7 cards ....
yeah same here fuck msi carbon, these ones at least work if you do all the required steps I returned all my msi carbon boards and pros
|
|
|
anyone try the 2270-A?
it has 7 slots and two m2s as well
answered my own question it worked, this one actually has two m2 slots so theoretically it could do 9 but im told windows 10 only recognizes 8
i have z270a, 9 cards on linux and 8 cards on Windows, works well. A guy in YouTube can run even 12 cards on this mobo, i haven't tired. you could do 8 amd and 4 nvidia on windows right?
|
|
|
I've had similar issues with server psu's and modular psu's working together to power a rig, or powering multiple setups..
Somethings not right with server PSU's when it comes to powering risers. Not sure what exactly; I have setups with and without risers and powering them w/ a server psu sucks ha.
So, I started powering the risers, mobo, and CPU with a 650w fully modular psu..leaving the server psu to do all the heavy lifting with GPU's. Not sure if it's just me.. but switching my power source from server to modular for merely power the risers, solved my glitchy power issue.
I really feel we've had the same issue. Hope this works out for you.
that was my setup as well, but i did not use the modular PSU to power the risers , I think it was the motherboard after swapping it out the machine seems more stable no shutdowns, and when i power it off the fans spin on some cards like @PcChips said but they are still detected as normal.
|
|
|
I run a walmart-rack tower of 3 rigs, with 6 PSU's one of my server PSU's powers cards between two different rigs I don't have the issues you describe when the motherboard reboots, yes, the cards stay on, but it still works normally
I swapped out the motherboard for a Asus 270-A one and it seems to not have that issue anymore .... wierd ? It seems the other board was the normal BTC board from biostar. Maybe an issue with the bios on the motherboard ? I neevr updated that board its like 2-3 years old too.
|
|
|
|