Thanks for your patience as we work through some hiccups on the new site. It seems that some users are having issues verifying their identities and we are working closely with the development team to correct any problems with our new system.
We hope you will understand that with the launch of our new, improved website that we may run into occasional issues with functionality. With this in mind, you can help us improve our service by offering up any information about your particular situation as the Customer Service team requests it.
Please bear with us during this initial launch phase. We hope to be back up to full speed very soon with your help and continued support.
I never had to login to verify. Now I don't know what to do? Should I create an account??? IF I do will it interfere with my known verification??? Yes, go ahead and try to create an account. It says "Service Unavailable" when trying to create an account!
Meanwhile BTC creeps higher and higher.
Could have got all in at 7:00am...It's working now... |
|
|
|
Thanks for your patience as we work through some hiccups on the new site. It seems that some users are having issues verifying their identities and we are working closely with the development team to correct any problems with our new system.
We hope you will understand that with the launch of our new, improved website that we may run into occasional issues with functionality. With this in mind, you can help us improve our service by offering up any information about your particular situation as the Customer Service team requests it.
Please bear with us during this initial launch phase. We hope to be back up to full speed very soon with your help and continued support.
I never had to login to verify. Now I don't know what to do? Should I create an account??? IF I do will it interfere with my known verification??? |
|
|
|
We're happy to announce that our new website is now live and cash deposits are turned back on! Again, we apologize for the inconvenience and thank you for your patience. Things don't always run smoothly when implementing new technology with third-party providers involved, so thanks for standing by!
I became Verified prior to the new site. Now it won't let make more than 1,000.00 in transactions a day. I used to be good for 2,000.00 Never had to login before! What do I do? |
|
|
|
What speeds are you guys holding? Mine is at 330.5Mh/s. Been going a since Wednesday. About 3.5HW errors an hour.
So far it's steady around 334.2Mh/s. I finally got 99 of them working with CGMiner 3.1.1 this evening on a Win7 laptop. You're probably going to be better off with the Thermaltakes on order, the arctic fans aren't cutting it right now. After more than 24 hours the HW errors are piling up, it's jumped to over 10% error rates.  Thanks for the link, might just get a couple of thermaltakes as well. "snipped" It could be the hub itself. On main page info of lesser error D-Link hub. Also calculate how many watts you are using to not over draw from hub. don't put hub on flat surface as heat builds up.Put hub low in altitude as it's a few degrees cooler on the floor. Just a word from the blind...  It's true the hubs can make all of the difference, I had been running 10-port Manhattan hubs with many problems it powering off intermittently. Decided to go all Ankers which have been rather stable in comparison. Appreciate the suggestion on the draw and placement, will give it a try! Even the Anker's have issues as someone posted about an issue of two USB ports of the 10 on one hub always had issues. So on that particular hub they ran two less Erupters. I'm nearly certain it was an anker. |
|
|
|
No possible because the oscillator for the USB is a fixed frequency one. The voltage is also fixed at the lowest possible for the current frequency to match the 500mA spec of USB ports.
Ah - thanks for that insight. ""Generation 1: Block Eruptor. 130nm with 6-8J/GH. Each chip's rated frequency is 336MHz at 1.05V. It translates to 336MH/s because it does one hash per cycle. The chips work stable and well at 392MH/s at 1.15V. Further overclocking needs proper handling of heat and power supply."" |
|
|
|
No. Why am I here.
Stop these dam it.
Going poor
Beat me to it!  |
|
|
|
still open for orders?
group #6 will start soon, get your btc together! It's "together" just not accessible yet... |
|
|
|
What speeds are you guys holding? Mine is at 330.5Mh/s. Been going a since Wednesday. About 3.5HW errors an hour.
So far it's steady around 334.2Mh/s. I finally got 99 of them working with CGMiner 3.1.1 this evening on a Win7 laptop. You're probably going to be better off with the Thermaltakes on order, the arctic fans aren't cutting it right now. After more than 24 hours the HW errors are piling up, it's jumped to over 10% error rates. Thanks for the link, might just get a couple of thermaltakes as well. "snipped" It could be the hub itself. On main page info of lesser error D-Link hub. Also calculate how many watts you are using to not over draw from hub. don't put hub on flat surface as heat builds up. Put hub low in altitude as it's a few degrees cooler on the floor. Just a word from the blind... |
|
|
|
A lot of canary usernames. Did I miss a fad?
really? i never looked Is the Iconic Image of you chipping away at friedcat's mound of Erupters?!  |
|
|
|
I'd send and he can refund. He's probably about to email in the order though.
Talk about skin of my teeth. This is why canary and I are friends. Yep, Aces! |
|
|
|
THIS 5TH GROUP BUY IS NOW CLOSED.
Nooooooooooooooooooooooooooooooooooooooooo!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Should I send payment? Was not aware the timer started! |
|
|
|
I think these puppies will overclock fine with an innovative cooling solution.
From what I can tell, we'll need some type of software interface to make overclocking possible. I believe this was previously accomplished with GPUs through the use of OpenCL. So we'd need info/etc from ASICMiner on how/if this is possible. ck or kano can likely clarify. IMO- There needs to be an overclocking incentive to the Erupter... Could you ask them? |
|
|
|
I see <1% errors usually, with peaks around 1%. I saw >1% before I found a good cooling solution. How hot is your erupter getting? Can you hold your finger on the heat shield? I think these puppies will overclock fine with an innovative cooling solution. |
|
|
|
How much longer this group buy open for?
Through today at least?
requested payment address from friedcat. will put up a timer when received OK great. I will get my order in when it comes down to the wire... |
|
|
|
everything has been shipped out except 2 that still need to verify...
I presume the Fedex next day's will arrive Monday? |
|
|
|
Alright folks, all but 15 USPS orders went out. these 15 just finished getting packed and are ready for drop off at post office tomorrow AM.
I'm going to get some sleep now, insanely tired. will send tracking numbers to all tomorrow.
all fedex shipments went out and some of you should be receiving them starting tomorrow.
good nigh for now.
Thanks for the most Incredible Service! |
|
|
|
shipping upgrades are now closed for group #4. I'm immersed in shipping out now.
Could you make it two red and two black please |
|
|
|
Thank you CanaryInTheMine. Received mine today and am mining today. Great service and great communication skills. Good luck with the new group buys! Please, Could those who can consider posting relevant information to setting up your mining rigs for the USB Erupters here: https://bitcointalk.org/index.php?topic=220905.msg2326671#msg2326671Hope this is not considered spam. MikeMike, you're gonna become an expert at this!!  Thanks! It helps... |
|
|
|
Thank you CanaryInTheMine. Received mine today and am mining today. Great service and great communication skills. Good luck with the new group buys! Please, Could those who can consider posting relevant information to setting up your mining rigs for the USB Erupters here: https://bitcointalk.org/index.php?topic=220905.msg2326671#msg2326671Hope this is not considered spam. |
|
|
|
I am using Windows 7 32-bit and CGMiner 3.1.1 with no special settings on Slushs Pool. My usb hub is an old hub i had from my Xbox 360 Rock Band kit. I picked up a desktop fan from Walmart. *SNIPPED* I also have three more Block Erupters, a new USB hub, and a couple fans heading my way in the mail right now. Fans: http://www.amazon.com/Coolerguys-Dual-80mm-Cooling-Fans/dp/B002NVC1DS/USB Hub: http://www.amazon.com/gp/product/B000KUQ8FG/ref=oh_details_o00_s00_i01I found this in the USB hub reviews. "Comes with external power adapter. Output 5V, 2.6A, Energy Consumption 13W max." I should be able to power my 4 Block Erupters with no problem. I plan to get cgminer compiled on my Raspberry Pi Model B. Can anyone help a Linux noob compile cgminer 3.1.1 on a Raspberry Pi?  Awesome! Thanks for your Contribution. I hope you find what you need. |
|
|
|
|
Show Posts
