Thanks or setting up the Faucet... Added to OP Linked on our Facebook page too- great work! Just sent 10 coins to get the ball rolling ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) .
|
|
|
I just want to say this launch is gone great so far. And to thank Judge for trying he best in a world where people are just spreading FUD. Miming happily at suchpool and have around 500 coin or so. While the coin still is new and still needs features, I am for now planning on supporting this coin.
I understand that it hurts you personally judgecrypto when someone calls you a liar. But just remember you get mad because its not true but you also need to keep clam to show you can be the man behind the coin. =)
+1 Well done Dev thanks for a good launch and staying in touch even with the critics and being honest. I like the way you have asked for phone numbers so you can talk to people that are questioning things, that's a first as far as I'm aware. I have just sent you 50 coins as a little thank you. Sorry couldn't be more haven't got many myself. Keep up the good work ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . Thanks for the donation ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I will work hard to make take this coin places! You're welcome it's the least I can do ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) .
|
|
|
I just want to say this launch is gone great so far. And to thank Judge for trying he best in a world where people are just spreading FUD. Miming happily at suchpool and have around 500 coin or so. While the coin still is new and still needs features, I am for now planning on supporting this coin.
I understand that it hurts you personally judgecrypto when someone calls you a liar. But just remember you get mad because its not true but you also need to keep clam to show you can be the man behind the coin. =)
+1 Well done Dev thanks for a good launch and staying in touch even with the critics and being honest. I like the way you have asked for phone numbers so you can talk to people that are questioning things, that's a first as far as I'm aware. I have just sent you 50 coins as a little thank you. Sorry couldn't be more haven't got many myself. Keep up the good work ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) .
|
|
|
Neither pools are working for me, im getting a much higher hashrate than x11 though.
[2014-07-06 12:56:33] GPU #0: GeForce GTX 275, 449546 khash/s
Can you actually mine any x11 coins though or do they fail to acknowledge you too? Might be an Nvidia card problem. Mining fine with AMD cards using sgminer on pools with dedicated and chickenstrips.
|
|
|
Brit Pool for you: https://brit.suprnova.cc![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.suprnova.cc%2Fsuprnova-logo-1-small.jpg&t=663&c=kVNtgqOnvRcpVQ) This is a Suprnova NG Pool, you can use your unified login there and all your pool workers from earlier setups too. SSO Single-Sign-On on this Pool - You can also use your previously set up workers ! Payouts every 30 seconds DDoS protectedSuprnova Quality, lots of experience in all kind of hashes - we had the first X13 Stratum and were among the first X11 ! Highly optimized Stratums and MPOS implementations. Idle Worker Notifications Two Factor Authentication if wanted Support 24x7 via IRC,Mail,PM etc.Only 1 % fee ! (thats 50% lower than most other Pools !) SSL Encryption for the whole pool !
Get the last BritCoins on the minute #1 BritCoin Pool ! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I'll shut down Stratum as soon as POW ends, so your failover can kick in ! Has been a very good pool as usual thank you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Click here and join us!Prop 1% VarDiffDedicated Server EU(Amsterdam, ams-ix)DDos protectedWe are up and running !!!GO GO GOStill waiting for activation email ![Angry](https://bitcointalk.org/Smileys/default/angry.gif)
|
|
|
Price is BTC0.1 per coin
Coin numbers available are #63 - #100
Payment will be BTC0.05 to reserve your coin with the other BTC0.05 due at time of shipping which should be around October - November of this year.
How to buy:
reply to this post with #63 - #66 if you want to buy coins #63 - #66 and then send BTC0.2 to the provided BTC address and then send TX ID in PM
I'm a little confused. I asked for #73 and have sent 0.05btc to reserve expecting to pay another 0.05 plus shipping when available. Just looked again at your OP and it says send 0.2btc? Hedge that was just an example you would send 0.2 if you reserved 4 coins Ah ok I see what you're saying that makes sense: #63 + #64 + #65 + #66 = 4 coins x 0.05btc = 0.2btc ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Are there any coins left to buy? I think #78 is last one Ok I'll have that too please. Will pay tomorrow now off to bed.
|
|
|
what set need for X15 ATI HD7950 ?
Try following should get 2.15 mh/s: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe -o stratum+tcp://east1.us.stratum.dedicatedpool.com:6002 --pool-algorithm bitblock --name BBL -u ***** -p ***** --gpu-platform 0 --intensity 18 -g 2 -w 128
|
|
|
"failover-only": true, "algorithm": "bitblock", "devices": "all", "intensity": "19", "worksize": "64", "gpu-engine": "1100", "gpu-memclock": "1250", "gpu-threads": "2", "gpu-fan": "0-86", "auto-fan" : true, "auto-gpu" : true, "gpu-powertune": "20", "temp-cutoff": "95", "temp-overheat": "85", "temp-target": "70", "gpu-memdiff": "0,0,0", "shares": "0", "api-mcast-port": "4028", "api-port": "4028", "expiry": "28", "failover-switch-delay": "60", "gpu-dyninterval": "7", "log": "5", "no-pool-disable": true, "no-client-reconnect": true, "queue": "1", "scan-time": "7", "tcp-keepalive": "30", "temp-hysteresis": "3"
Thank you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
x15 sgminer from first page works well for me.. pushing 2.8+ on r9 280x's, low temps, etc
Would you mind showing your .bat file please?
|
|
|
Price is BTC0.1 per coin
Coin numbers available are #63 - #100
Payment will be BTC0.05 to reserve your coin with the other BTC0.05 due at time of shipping which should be around October - November of this year.
How to buy:
reply to this post with #63 - #66 if you want to buy coins #63 - #66 and then send BTC0.2 to the provided BTC address and then send TX ID in PM
I'm a little confused. I asked for #73 and have sent 0.05btc to reserve expecting to pay another 0.05 plus shipping when available. Just looked again at your OP and it says send 0.2btc? Hedge that was just an example you would send 0.2 if you reserved 4 coins Ah ok I see what you're saying that makes sense: #63 + #64 + #65 + #66 = 4 coins x 0.05btc = 0.2btc ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Are there any coins left to buy?
|
|
|
Scamming lowlife thieving fucktards everywhere. Hope they rot in hell. Give me a minute in a room with them they'll never scam again.
|
|
|
looks like my gpu's driver pachage is 13.251 catalyst version 13.12 ... is that what I need to update? I'll see if I can find a good tutorial to help me, thanks for the hint ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Yes that's what I'm using. Have you tried adding --name BBL to your .bat command line? ya just tried it again with the --name BBL... no luck . I'll try and figure out how to update my driver when I get home tonight... thanks for all the help peoples ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Sounds like you don't need to change driver. You've got the same one as me and I'm running a 6990 stable. Took me a few hours to work out best .bat but up and running now fine. Good luck anyway ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . K thanks, I kind of figured so... I mine x11 and x13 just fine the way it is... just took a bit to get the bat right, although I did read something about an extra 5% with new driver? so I'll prob still look into that ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Are you running 32 or 64 bit Windows 7? 64 Ah ok mines on a 32. Not sure about that then.
|
|
|
Hold this coin, don't rush to sell. Remember how well Boost Performed after a few weeks. If I didn't sell I would have 20BTC. I am keeping this badboy ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Agree 100%
|
|
|
looks like my gpu's driver pachage is 13.251 catalyst version 13.12 ... is that what I need to update? I'll see if I can find a good tutorial to help me, thanks for the hint ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Yes that's what I'm using. Have you tried adding --name BBL to your .bat command line? ya just tried it again with the --name BBL... no luck . I'll try and figure out how to update my driver when I get home tonight... thanks for all the help peoples ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Sounds like you don't need to change driver. You've got the same one as me and I'm running a 6990 stable. Took me a few hours to work out best .bat but up and running now fine. Good luck anyway ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . K thanks, I kind of figured so... I mine x11 and x13 just fine the way it is... just took a bit to get the bat right, although I did read something about an extra 5% with new driver? so I'll prob still look into that ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Are you running 32 or 64 bit Windows 7?
|
|
|
looks like my gpu's driver pachage is 13.251 catalyst version 13.12 ... is that what I need to update? I'll see if I can find a good tutorial to help me, thanks for the hint ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Yes that's what I'm using. Have you tried adding --name BBL to your .bat command line? ya just tried it again with the --name BBL... no luck . I'll try and figure out how to update my driver when I get home tonight... thanks for all the help peoples ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Sounds like you don't need to change driver. You've got the same one as me and I'm running a 6990 stable. Took me a few hours to work out best .bat but up and running now fine. Good luck anyway ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) .
|
|
|
How is X15 better?? Sorry for a noob question.. I am new to mining.. got the hang of scrypt but never got what X11 or 13.. .and dont remember seeing X14 but there is a X15.. Is it essentially the same sgminer used for these?
You need to download modified version of sgminer to mine X15, check OP.
|
|
|
SECURITY INFOHey guys, since this coins is getting more and more interest, also hackers seem to be interested... it has come to my attention that someone is trying to hack into Maia Accounts using brute force attacks. I've instantly activated an IP Ban against that user, after 3 failed logins his IP will get banned and I'm notified. I've also activated two factor Auth, so a E-Mail is sent when you're trying to change wallet address etc. Please make sure your settings are still right and no one hacked into your account ! https://maia.suprnova.ccPS: NEVER use same login details on multiple pools !! I had my account compromised and notified suprnova. I would like to give a shoutout to suprnova as the guy instantly took measures AND even offered me a refund (out of his own pocket) on my stolen coins! Now THAT's service. Thanks again ocminer! That's excellent service ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Price is BTC0.1 per coin
Coin numbers available are #63 - #100
Payment will be BTC0.05 to reserve your coin with the other BTC0.05 due at time of shipping which should be around October - November of this year.
How to buy:
reply to this post with #63 - #66 if you want to buy coins #63 - #66 and then send BTC0.2 to the provided BTC address and then send TX ID in PM
I'm a little confused. I asked for #73 and have sent 0.05btc to reserve expecting to pay another 0.05 plus shipping when available. Just looked again at your OP and it says send 0.2btc?
|
|
|
looks like my gpu's driver pachage is 13.251 catalyst version 13.12 ... is that what I need to update? I'll see if I can find a good tutorial to help me, thanks for the hint ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Yes that's what I'm using. Have you tried adding --name BBL to your .bat command line?
|
|
|
|