Look at your logs according to the logs this one below Failed to connect to solo.ckpool.org:3333, user=32H4BVgYFXd9oeHPGjkFR36tRufug3JCPT.09 Cannot open stratum channel It fails to connect to Ckpool you out a wrong pool configuration try to copy-paste again your user and pass under pool configuration and make sure no extra spaces. Or if still not try to mine on another pool like ViaBTC. |
|
|
|
Why not use dumpwallet command it will export all of your private keys into a file and then open it with notepad and copy all private keys and export it to Electrum and let the Electrum sync. Now, after sync, you can sort all of the addresses with balances you can go under the addresses tab and look for balance just click it it will sort all addresses with balances. Here's what I'm talking about  |
|
|
|
This looks like good software, why would you suggest this over minerstat or hiveos?
Do miners report power usage? I don't see anything reporting power in my miners dashboard.
Would the miners reported power usage differ from actual usage from the wall?
Awesomeminer has more features and tools compared to minerstat and hiveos and I never tested minerstat except for hiveos which is also a good software that you can able to monitor miners under their website. However, Awesomeminer have more feature to monitor miners that includes daily or monthly earnings and also support antminer APIs. About report power usage I suggest you read this "Power consumption and profitability"About the actual usage from the wall, I believe there is a slight difference because they only get the report directly from the miner dashboard through API. |
|
|
|
Why not try to flash this unit there is someone here share a firmware for this unit I found it from this post below - https://bitcointalk.org/index.php?topic=5206886.msg54490620#msg54490620But I don't know the firmware for cheetah s5 miner. The problem is no one can help you here because this unit does not have support or even a website where you can able to complain about your issue unlike other units like Antminer or Avalon. If you want to hire a technician I suggest you try to contact ZeusBTC or find a repair center near you check this link below for listed repair centers. - https://www.zeusbtc.com/ASIC-Miner-Repair/I've also noticed that your username is nearly the same as the user who shares the firmware above is this your alt account devindeysel? |
|
|
|
The mobile version of Electrum has limited features, unlike the PC version where you can manually choose which UTXO you want to include in your transaction. If you don't have a PC and you only have an Android phone the khaled0111 suggestion will work by creating raw transactions using coinb.in and pasting it to your Electrum Android under send tab. Next time if you don't want to pay a large fee in the future I suggest you merge all of your inputs or UTXOs so that you don't need to choose only one UTXO and pay large fees. Check this thread on how to consolidate all inputs here https://bitcointalk.org/index.php?topic=2848987.0 |
|
|
|
Take note of the image you can use height instead of width sample below but the overall size of the image will totally decrease or increase both width and height [img height=200]sample image.jpg here[/img] Or you can totally edit the size by adding both width and height [img width=400 height=200]sample image.jpg here[/img] We already have a guide about this here "[Tutorial] How to add image, resize image and make image clickable" including how to add URL inside the image. |
|
|
|
Hello goodnight.
I used stratum+tcp, but I don't know why it doesn't appear in the code. I also corrected it and put it in code form, can you see it now?
How about extra spaces have you tried typing them manually than pasting the URL? There might be extra space at the end or on the first character. Also would you mind to check the dashboard if this unit is g19 or g29 control board because I heard that you can able to flash g19 units with BraiinsOS so you can try to boot Braiins with SD card on this unit. Check the official thread here https://bitcointalk.org/index.php?topic=5036844.0Then ask on how to boot BraiinsOS through SD card. Don't flash it just boot it with SD card to avoid program corruption(Hard Bricked). |
|
|
|
That's a fake miner iPollo never made a miner that supports ETC they are focused on creating a miner that supports only grin coins. And the site is never posted here on the forum so how did you find this miner? This miner is not also listed on asicminervalue.com so I'm sure this is a fake miner. If you want to buy a real miner then go directly to trusted manufacturers listed here https://bitcointalk.org/index.php?topic=5045732.0 |
|
|
|
Not just gonna help but doing that. We helped to withdraw 35-40k already. Withdrawals are prohibited but trades are still work.. This allows to move funds from one account to another who can withdraw. There's the link for tg group in the first msg, there you can see screens, transaction ids etc.
I can't seem to find where you can able to transfer or move the funds from your account to another account. It's not the same as yobit that you can able to do that through yobicode and send them to someone or to your another account and redeem. So how can you help Russian people with your service? Since you are a newbie how can we sure that you are legit? |
|
|
|
|
There are few threads about this exchange and they are known to suspend user's accounts or lock withdrawal and ask about a few personal information.
And most of the shitcoins are listed on this exchange not worth using this exchange and there is a big possibility they will end up the same as yobit.
So it's not a problem if they banned Russia from withdrawing funds. They can still exchange their coin for other exchanges and it's risky to trade on stex.
|
|
|
|
|
Why not use Awesomeminer to monitor the power consumption of each miner? Any PDUs should work you just need to use PDUs that support higher wattage.
And take note you dont need to use power surge protector you must plug your PDUs directly to the wall to get the best power.
|
|
|
|
|
Well, mine is 8GB ram is fine and I use GTX 1070 with the dual monitor to see and monitor the movement of the price and to open multiple charts and tools.
You can also run a trading bot like Zenbot while opening multiple charts.
If you are looking for a setup with more than two monitors then you will need a graphics card that supports up to 4 monitors like a QUADRO graphics card.
Take note if you are going to use more than 2 monitors it will eat so much ram and CPU so you will need a better CPU and higher ram to use 4 monitors smoothly.
|
|
|
|
wonder if any one have firmware file
i noticed that s19 90th has two different model 76 asic and 88 asic
i still cant find firmware for 88 asic
According to previous posts above it is a beta test firmware for s20 miner so it's impossible to find that firmware. Why not try some modded firmware like the firmware from asic.to? Check their thread here https://bitcointalk.org/index.php?topic=4513567.0 You can also check this section https://bitcointalk.org/index.php?board=42.0 |
|
|
|
Look at this log driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 63 asic 0 asic there might be a connection issue on this hashboard would you mind to try run all hashboard one by one? You can follow the guide from this link " Test hash board one by one" Don't forget to switch or swap cables to another hashboard to test if that hashboard is totally broken. |
|
|
|
Just stopped mining.
Any help would be appreciated.
~snip~
Now it detects only one hashboard did you touch anything in the hashboard? If this is new where did you buy this unit? If it's a direct manufacturer contact their support they might be able to help you use this email support@canaan.ioYour logs from previous posts look related to the internet your router might block your miner from connecting to any pool. You can try to change your miner from DHCP to static IP and add Google DNS or Cloudflare DNS. And about your new logs, it seems one hashboard was detected and two hashboard was gone? Don't touch anything physically if it is still under warranty only do software like resetting the miner or upgrading it to the latest firmware. Like I said above it might be also a PSU issue. |
|
|
|
Can you edit your post and put all your logs under insert code tag a sharp # button when editing a post here? All I see is this Apr 20 04:55:44 rockchip cgminer[251]: Failed to resolve (?wrong URL) bch.viabtc.io:443
Apr 20 04:55:44 rockchip cgminer[251]: Failed to resolve (?wrong URL) bch.viabtc.io:25
Apr 20 04:55:44 rockchip cgminer[251]: Failed to resolve (?wrong URL) bch.viabtc.io:3333 Did you put these pools without stratum+tcp sample like this stratum+tcp://btc.viabtc.io:3333 try it again with stratum+tcp and I think you can also able to mine with btc.viabtc.com:443 if the viabtc.io does not work. |
|
|
|
From your first question according to their documentation, you will need the samourai wallet in order to use whirlpool. Read the guide from this source below - https://bitcoiner.guide/whirlpool/Then straight and look for "How do I use Whirlpool?" About the 2nd question, I heard Coinjoin many times with wasabi but on the website coinjoin.io I never heard of that site. However, it seems there is someone mentioned it here on the forum but it is under a scam website check them here below - https://bitcointalk.org/index.php?topic=5381839.0 |
|
|
|
It seems you don't understand anything from the previous posts are you living in China? use translate.google.com to understand what other people posts above. I think you didn't understand about verifying Electrum to make sure you are using a legit Electrum wallet. You can read this guide below on how to do it - https://bitcointalk.org/index.php?topic=5240594.0You must read that thread first to understand how it works use the translator if you didn't understand then go back here for the result. And the website they are talking about is starting with https not the screenshot of your Electrum wallet. The official website of Electrum is Electrum.org and if you downloaded the Electrum wallet on different source or website then it's a malware or fake Electrum wallet. |
|
|
|
|
Show Posts
