That Fury X. not Fury NANO. Fury X hug power consume.
What do u mean? In the article there is ASUS Fury(neither X nor Nano). Though Nano should be have same exact performance as Fury X unless u make it throttle, which is impossible with most of algos if u tune it. Since properly tuned Fury x shouldn't be exceeding 180Wt Nano shouldn't have any throttling as well. Oh, sorry for mistake. First picture is Fury X.
|
|
|
Many Thanks. Great Fiji get 0.53 g/s
|
|
|
These were good GPUs to actually mine ETH before the Polaris came out. I believe these were released late 2015 when ETH was launched and it was the most energy effecient GPU at the time especially the Nano.
I had a buddy who had tons of these. However for some reason he had very high failure rates, he said it was the highest failing GPU he has ever owned. When the Polaris came out people stopped buying Nanos due to their high price and bought the RX 470/480 instead. It had similiar hashrates and power consumption figures.
Since they were produced in small quantities, many miner developers don't spend too much effort trying to make them more efficient or faster. Hence they are usually just best in the hands of gamers.
I'm don't mine Ethash with NANO is a long time.
|
|
|
Just seeing first result in benchmark list makes me cry: 29.8mhs@170Watts on ETH)))) I had that hash rate @140-145Wt(975Mhz core) with my cards. Or it could be 30.8mhs @1000Mhz@155Wt. And unlike pascal it newer dropped with DAG grow) In most of Fury mining videos they even have 250+Wt... some miners. My h\rs in some other algos were: lyra2v3 58mhs@150-155Wt, cryptonightR 880hs@120Wt That Fury X. not Fury NANO. Fury X hug power consume.
|
|
|
lolMiner 0.9.1 - Fiji cannot mine GRIN31. Adrenalin 19.11.3 & 19.10.1 is the same result Old version can mine.
+---------------------------------------------------------+ | _ _ __ __ _ ___ ___ | | | | ___ | | \/ (_)_ __ ___ _ __ / _ \ / _ \ | | | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | | | (_) | | | | | (_) | | | | | | | | | __/ | | |_| |\__, | | | |_|\___/|_|_| |_|_|_| |_|\___|_| \___(_) /_/(1) | | | | This software is for mining | | Equihash 96/5, 144/5, 210/9 | | BeamHash II (EquihashR 150/5/3) | | ZelHash (EquihashR 125/4/0) | | CuckarooD 29 | | Cuckatoo 31 | | | | | | Made by Lolliedieb, November 2019 | +---------------------------------------------------------+ Warning: No user profile defined in command line (--profile <profileName> missing) Using only DEFAULT section and command line input Reading pool data from command line lolMiner is configured to mine Grin(GRIN-AT31), Cuckatoo-31
Setup Miner... Device 0: Name: AMD Radeon (TM) R9 Fury Series Address: 1:0 Vendor: Advanced Micro Devices (AMD) Memory: 4096 MByte (4042 MByte free) Active: false ()
Connecting to pool... Connected to eu.stratum.grin-pool.org:3416 (TLS disabled) Authorized worker: Lolliedieb New job received: 8 Difficulty: 4 Start Mining... All devices deselected or failed compatiblity check. Closing lolMiner
|
|
|
Glad to see that you have maintained your rig. I do not own an R9 Fury but I do have Vega 56 and with electricity prices at $0.11 per unit. It barely makes even for the electricity cost even when mining the most profitable coin at the moment. What is the electricity price that you're paying? Mining turtle coin?
Glade to see you too. electricity prices est. at $0.13 per unit Yes, mine turtle
|
|
|
Who have R9 NANO rig, What about your mining? Still mining? For me. I'm fine I'm OK. Still fun mining. Share your Earning and Performance about R9 NANO I will share performance by algo, hashrate, electric, miner, os for more in next time. -----------------------------------Performance---------------------------------- Base on Win10Driver 19.10.1, 18.6.1 Power Consume :refer from HWinfo GPU Chip Power MSI Afterburner config GPU as below,Core Voltage: -81mV Power Limit: depend on algo Core Clock: Default Memory Clock:Default Algo: DarkcoinAlgo: Darkcoin Coin: TONCOIN Hashrate: 1020 MH/s Power: 104w Miner: lolminer 1.42 Algo: Argon2d(NIM)Coin: NIM Hashrate: 390 kh/s Power: 120w Miner: TeamRedMiner Algo: Chukwa v2Coin: TRTL Hashrate: 34kh/s Power: 120w Miner: Teamredminer v0.7.16b Algo: Beam Hash III(BEAM)Coin: BEAM Hashrate: 20 sol/s Power: 120w Miner: lolMiner 1.04 Algo: KawpowCoin: RVN Hashrate: 16.2 Mh/s Power: 120w Miner: TeamRedMiner v0.7 Algo: Argon2id ChukwaCoin: TRTL,...+ Hashrate: 95kh/s Power: 104w Miner: Teamredminer v6.1 This is Power from HWinfo and on Clamp MeterHWinfo Clamp Meter76.2w 83.6w 89.6w 104.1w 104.7w 129w 112.1w 138.6w 119w 150w 134.6w 175w 149.4w 209w 162.8w 242w
|
|
|
I think k12 it is for FPGA. GPU is not take profit
|
|
|
increase hashrate from ninjaminer, GREAT
|
|
|
Please support any ProgPOW such as SERO, ZANO, EPIC
|
|
|
Any suggestions on what to tweak with HBM? I've got bios with 400mhz-strap +1 I have Fury Nano
|
|
|
What config for Fiji ? I follow picture on github, it cannot works.
|
|
|
Hi Dev, When fijiboost ? it mean R9 Fury HBM RAM (only one memory type: Hynix)
|
|
|
Hi dev, Have you test on Fiji? It result for me is .. ./amdmemtweak -i 9 --cl 21 HBM memory type is not supported yet : No such file or directory I use Ubuntu 16.04.5 and amdgpu-pro 18.10-572953
|
|
|
miner is open source no dev fee
pool fee will be calculated over time as this is unique mining case, so far one dual core VPS is needed for 5 GPU on my side, atm over 90 VPS servers are online and will be upgraded as needed POW is not tied to reward but node receive it, and its reward is heavy limited
Thanks
|
|
|
Please support AMD Fiji 4G for Grin(Cuckaroo 29) your OS report "unsupport device: fiji"
|
|
|
for AMD minning BEAM, please support Fiji
|
|
|
What do I need to put into "Extra config arguments" field when setting up the custom miner in HiveOS to get this to work?
argument is the same on windows. you can see argument with run wildrig.exe --help on windows
|
|
|
|